316Ti Seamless Stainless Steel Tube
Short Description:
316ti Stainless Steel Tube Specification
| SS 316TI Standards | Stainless Steel 316TI |
|---|---|
| GOST 08Ch17N13M2T Seamless Tube Size | 3.35 mm OD To 101.6 mm OD |
| 316TI Stainless Steel Welded Tube Size | 6.35 mm OD To 152 mm OD |
| ASTM A213 TP 316TI Stainless Steel Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
| TP316TI Tube wall thickness | 0.020″ –0.220″, (special wall thicknesses available) |
| SS UNS S31635 Length | Single Random, Double Random, Standard & Cut length Tube |
| WERKSTOFF NR. 1.4571 Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF |
| 316ti Stainless Steel Form | ‘U’ bent or Hollow, Hydraulic, LSAW, Boiler, Straight Tube, Tube Coil, Round, Rectangular, Square Etc |
| ASTM A213 TP 316TI Stainless Steel Type | Seamless, ERW, EFW, Welded, Fabricated Tube |
| GOST 08Ch17N13M2T End | Plain End, Beveled End, Treaded Tube |
| ASTM A269 SS 316TI Marking | All 316ti Stainless Steel Tube are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
| UNS S31635 Application | Oil Tube, Gas Tube, Fluid Tube, Boiler Tube, Heat exchanger Tube, |
| ASME SA213 SS 316IT Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
| Stainless Steel 316TI Specialize in | ASTM A249 TP 316TI Stainless Steel Capillary Tube & Other Odd Size SS 316TI Heat Exchanger & Condenser Tube |
| ASTM A269 SS 316TI Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
| Stainless Steel 316TI Aerospace tubes | SS UNS S31635 Oil and gas tubes |
| Stainless Steel WERKSTOFF NR. 1.4571 Seamless Tube | GOST 08Ch17N13M2T Nuclear tubes |
| 316TI Stainless Steel Chemical process tubes | SS UNS S31635 Medical tubes |
| SS 316TI Heat exchanger tubes | Stainless Steel 316TI Control lines |
| SS TP316TI Umbilicals | ASTM A269 SS 316TI Polish Tubes |
| SS UNS S31635 Hydraulic tubes | GOST 08Ch17N13M2T High pressure tubes |
| 316TI SS Nuclear Fuel tubes | WERKSTOFF NR. 1.4571 EFW Tubes |
| Stainless Steel 316TI Instrumentation tubes | SS WERKSTOFF NR. 1.4571 Electropolished Tubes |
| SS UNS S31635 elliptical and Oval Tubes | ASTM A269 TP 316TI Stainless Steel Rectangular Tube |
| TP316TI SCH 40 Tube | SA213 TP316TI SCH 80 Tube |
| TP316TI Condenser Tubes | SS 316TI Oil & Gas Tubing |
| SS UNS S31635 SCH 40 Tube | Stainless Steel WERKSTOFF NR. 1.4571 SCH 80 Tube |
| GOST 08Ch17N13M2T Seamless Hollow Tubes | TP316TI SS Electropolished Tubes |
| 316TI Stainless Steel Capillary Tubes | UNS S31635 U Shaped Tube |
| ASTM A269 TP 316TI Stainless Steel Tube | ASME SA213 TP 316TI Stainless Steel Decorative Tubes |
| SS WERKSTOFF NR. 1.4571 Tubing | Stainless Steel 316TI Oil Tube |
| ASTM A213 TP 316TI Stainless Steel High-strength capillary tubing | 316TI Stainless Steel Bellows Tubes |
| GOST 08Ch17N13M2T precision tubes | SS UNS S31635 Transmission tubes |
| ASME SA213 SS 316IT Pitot tubes | SS UNS S31635 encapsulated coiled tubing |
| WERKSTOFF NR. 1.4571 high precision tubes | ASTM A269 TP 316TI Stainless Steel Nuclear Control Rod Tubes |
| SS UNS S31635 Seamless Tubing | ASTM A269 SS 316TI Gas Tube Ar 15 |
| Stainless Steel WERKSTOFF NR. 1.4571 Bourdon Tube | SS 316TI Triangle Tube |
| ASTM A213 Gr. TP316TI Gas Tubing | UNS S31635 Furnace Tube |
| SS UNS S31635 seamless coil tubing | ASME SA213 SS 316IT seamless straight tubing |
| Stainless Steel 316TI cold drawn seamless tubes | ASTM A249 TP 316TI Stainless Steel Aero engine tubes |
| SS UNS S31635 Aerospace Engine Tubes | ASTM A269 TP 316TI Stainless Steel Furnace Tubes |
| 316TI Stainless Steel Precision Tubing | UNS S31635 High Pressure Tube |
| GOST 08Ch17N13M2T Hot finished seamless tubing (HFS) | 316TI SS Cold drawn seamless tubing (CDS) |
| SS WERKSTOFF NR. 1.4571 Drawn over mandrel (DOM) | ASME SA213 TP 316TI Stainless Steel Finned Tube |
| TP316TI SS Tubes for Precision Components | Stainless Steel 316TI Sighting Tube |
| Seamless GOST 08Ch17N13M2T Tubing | WERKSTOFF NR. 1.4571 Round Tubing |
| High Quality SS UNS S31635 Seamless Tube | SS UNS S31635 Square Tube |
| Stainless Steel WERKSTOFF NR. 1.4571 Round Tube | 316TI Stainless Steel Rectangular Tube |
| ASTM A213 Stainless Steel Round Tubes | ASTM A249 TP 316TI Stainless Steel Triangle Tube |
| SS TP316TI Hexagonal Tube | 316TI Stainless Steel Hollow Tubes |
| SS 316TI thermocouple Tube | 316TI SS Polish Tube |
| SS UNS S31635 Cold Drawn Tube | ASME SA213 SS 316IT ERW Tube |
| SS UNS S31635 Colour Coated Tube | ASTM A213 Stainless Steel Welded Tube |
| TP316TI SS Secondary & Surplus Tube | Stainless Steel WERKSTOFF NR. 1.4571 Outside Polished Tube |
| GOST 08Ch17N13M2T Capillary Tubes | 316TI Stainless Steel EFW Tube |
| 316TI Stainless Steel Boiler Tubes | GOST 08Ch17N13M2T Cold Drawn Tube |
| ASTM A213 TP 316TI Stainless Steel U Shaped Tube | ASTM A269 TP 316TI Stainless Steel exhaust tubing |
| SS WERKSTOFF NR. 1.4571 Condensers tubes | SS UNS S31635 Super Heaters |
| ASTM A213 Stainless Steel Welded Tubes | ASME SA213 TP 316TI Stainless Steel redrawn tubing |
| WERKSTOFF NR. 1.4571 seam-welded tubing | Stainless Steel WERKSTOFF NR. 1.4571 cold-drawn coiled tubing |
| Stainless Steel 316TI Chemical Process Tubes | SS 316TI Welded coiled tubing |
| 316TI Stainless Steel heat resistant tubing | custom 316TI Stainless Steel tubing |
| SS UNS S31635 header tubing | GOST 08Ch17N13M2T rectangular tubing |
| SS UNS S31635 Cold Rolled Coiled Tubing | ASTM A213 Stainless Steel Heat-resistant capillary Tube |
| ASTM A269 TP 316TI Stainless Steel cannula Tubes | 316TI SS pyrometer tubes |
| ASTM A249 TP 316TI Stainless Steel protective tubes | SS TP316TI hypodermic tubing |
| SS WERKSTOFF NR. 1.4571 capillary tube | Stainless Steel WERKSTOFF NR. 1.4571 furnace tube |
| Stainless Steel 316TI Heat Exchanger Tube | ASTM A213 Stainless Steel Mortar Tube |
| GOST 08Ch17N13M2T Radiant Tube | 316TI Stainless Steel Square Tubing |
| SS 316TI Heat Exchager Tubes | ASME SA213 SS 316IT Tubing |
| ASTM A213 Gr. TP316TI oval tube | 316ti Stainless Steel seamless tube |
| ASTM A249 TP 316TI Stainless Steel Instrumentation Tubes | UNS S31635 coiled tubing |
| GOST 08Ch17N13M2T straight tube heat exchanger | SS UNS S31635 straight tube boiler |
| SS UNS S31635 umbilical tubing | 316TI Stainless Steel Tubing |
| SS TP316TI extreme environment gas tube | TP316TI SS tube stock |
| 316TI SS welded tubing | SS 316TI tubing bends |
| ASTM A213 Stainless Steel thin wall tubing | custom SS UNS S31635 tubing |
| ASTM A249 TP 316TI Stainless Steel tube | 316TI Stainless Steel mechanical tubing |
| Stainless Steel 316TI Inconel Instrumentation Tubes | GOST 08Ch17N13M2T Capillary Tubing |
Suppliers & exporter of 316ti Stainless Steel seamless, welded or welded and cold drawn process, depending on your requirements.
316ti Stainless Steel tubing composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| 316TI | min. | – | – | – | – | – | 16.0 | 2.0-3.0 | 10.0 | – |
| max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.030 | 18.0 | 14.0 | 0.1 | ||
316ti Stainless Steel Tube mechanical properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| 316TI | 515 | 205 | 35 | 75 | 205 |
Equivalent Grades for 316ti Stainless Steel Tube
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 316TI | 1.4571 | S31635 | SUS 316Ti | 320S31 | 08Ch17N13M2T | Z6CNDT17‐123 | X6CrNiMoTi17-12-2 |
Material Grade
| Material | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| Finish | Thickness | Characteristics | Applications |
| No. 1 | 3.0mm~50.0mm | Finished by hot-rolling, annealing and pickling, characterized by white pickled surface | Chemical industry equipment, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface | General Application Medical Instruments, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware, architectural purpose |
| No. 4 | 0.4mm~3.0mm | Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes | Milk & Food processing facilities, Hospital Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
| HL(Hair Line) | 0.4mm~3.0mm | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware vehicles |
Chemical Composition
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Nb |
|
201 |
≤0.15 |
≤1.0 |
5.50-7.50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3.50-5.50 |
- |
- |
0.05-0.25 |
- |
- |
|
202 |
≤0.15 |
≤1.0 |
7.50-10.00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4.00-6.00 |
- |
- |
0.05-0.25 |
- |
- |
|
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6.00-8.00 |
- |
- |
≤0.1 |
- |
- |
|
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
|
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
|
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304H |
0.04-0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0.10-0.16 |
- |
- |
|
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6.00-9.00 |
- |
- |
- |
1.00-3.00 |
- |
|
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10.50-13.00 |
- |
- |
- |
- |
- |
|
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22.00-24.00 |
12.00-15.00 |
- |
- |
- |
- |
- |
|
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24.00-26.00 |
19.00-22.00 |
- |
- |
- |
- |
- |
|
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0.10-0.16 |
- |
- |
|
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
|
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11.00-15.00 |
3.00-4.00 |
- |
- |
- |
- |
|
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0.7 |
- |
- |
- |
|
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
|
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
|
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4.50-6.50 |
2.50-3.50 |
- |
0.08-0.20 |
- |
- |
|
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24.00-26.00 |
6.00-8.00 |
3.00-5.00 |
- |
0.24-0.32 |
- |
- |
|
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19.00-23.00 |
23.00-28.00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
|
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14.00-16.50 |
Other |
- |
- |
- |
- |
- |
|
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
|
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
|
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
420J1 |
0.16-0.25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
420J2 |
0.26-0.40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
|
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
440A |
0.60-0.75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440B |
0.75-0.95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440C |
0.95-1.2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
441 |
≤0.03 |
0.2-0.8 |
≤0.7 |
≤0.03 |
≤0.015 |
17.50-18.50 |
- |
≤0.5 |
0.1-0.5 |
≤0.025 |
- |
0.3+3C-0.9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.
