Beryllium Copper, Tempered, Alloy 25 (C17200)

Short Description:

CuBe2 – UNS.C17200 Beryllium Copper Alloys


  • FOB Price: US $0.5 - 9,999 / Piece
  • Min.Order Quantity: 100 Piece/Pieces
  • Supply Ability: 10000 Piece/Pieces per Month
  • Port: Shanghai, Ningbo ,Shenzhen
  • Delivery time: 7-10 days after confirming the order
  • Origin: China
  • Payment Term: T/T , L/C
  • Standard: ASTM,AISI,SUS,JIS,EN,DIN,GB, ASME,etc
  • Mill: Pocso/ Tisco/ Lisco/ Jisco/ Bao steel/ H Wang
  • Product Detail

    Technical Specification

    Product Package & Shipment

    Company Introduction

    Question & Answers

    Product Tags

    C17200 Details:
    C17200 Beryllium Copper

    Cube2–C17200 (CDA 172) Beryllium Copper is the most commonly utilized Copper Beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches Rockwell C45. Meanwhile, the electrical conductivity is a minimum of 22% IACS in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures.

    Typical Application for C17200 Beryllium Copper Alloys:
    Electrical Industry: Electrical Switch and Relay Blades, Fuse Clips, Switch Parts, Relay parts, Connectors, Spring Connectors, Contact Bridges, Belleville Washers, Navigational Instruments, Clips
    Fasteners: Washers, Fasteners, Lock Washers, Retaining Rings, Roll Pins, Screws, Bolts
    Industrial: Pumps, Springs, Electrochemical, Shafts, Non Sparking Safety Tools, Flexible Metal Hose, Housings for Instruments, Bearings, Bushings, Valve Seats, Valve Stems, Diaphragms, Springs, Welding Equipment, Rolling Mill Parts, Spline Shafts, Pump Parts, Valves, Bourdon Tubes, Wear Plates on Heavy Equipment, Bellows

    Available Sizes:
    Custom Diameter & Sizes, Random Mill lengths

    Available Products (forms):
    Round bars, Round strips, Round wires, Round tube,
    Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates, Sheets, Coils
    Custom shapes are available upon request.

    Chemical Composition:

    Be: 1.85-2.10%
    Co+Ni: 0.20% Min.
    Co+Ni+Fe: 0.60% Max.
    Cu: Balance
    Note: Copper plus additions equal 99.5% minimum.

    Typical Physical Properties:

    Density (g/cm3): 8.36
    Density before age hardening (g/cm3): 8.25
    Elastic Modulus (kg/mm2 (103)): 13.40
    Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): 17 x 10-6
    Thermal Conductivity (cal/(cm-s-°C)): 0.25
    Melting Range (°C): 870-980

    Note:
    1). the units are based upon Metric.
    2). the typical physical properties apply to age hardened products.

    International Specification:

    Rods/Bars/Tubes: ASTM B196,251,463; SAE J461,463; AMS 4533,4534,4535; AMS4650,4651;
    RWMA Class 4
    Strips: ASTM B194, AMS4530,4532; SAE J461,463
    Sheets: ASTM B194
    Wires: ASTM B197, AMS4725, SAE J461,463
    Plates: ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651; RWMA Class 4.

    European Standards: CuBe2, DIN 2.1247, CW101C to EN

    Note:
    ASTM: American Society for Testing and Materials
    SAE: Society of Automotive Engineers
    AMS: Aerospace Materials Specification (Published by SAE)
    RWMA: Resistance Welder Manufacturers’ Association
    Note: Unless otherwise specified, material will be produced to ASTM.

    Mechanical Properties:

    The Mechanical Properties will be available on request from customers.

    Most Commonly Temper Used:

    Rods/Bars/Tubes: A(TB00),H(TD04),AT(TF00),HT(TH04)
    Strips: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04)
    Sheets: A(TB00),1/4 H(TD01),1/2 H(TD02),H(TD04),AT(TF00)
    Wires: A(TB00),1/4 H(TD01),1/2 H(TD02),3/4H(TD03),H(TD04)
    Plates: A(TB00),H(TD04),AT(TF00),HT(TH04)

     

    BERYLLIUM COPPER PHYSICAL & CHEMICAL PROPERTIES

    Beryllium Copper Physical Properties 25 C17200
       Yield Strength 108 cycles

    ksi

    Hardness
    Temper Heat Treatment Tensile Strength ksi 0.2% offset ksi Elongation % Fatigue Strength Diamond Pyramid Rockwell B or C Rockwell Superficial Electrical Conductivity % IACS
    A Dead Soft (TB00) 60-76 28-36 35-65 30-35 90-144 B45-78 30T46-67 15-19
    A Planished (TB00) 60-78 30-55 35-60 30-35 90-144  B45-78  30T46-67 15-19
    1/4 H (TD01) 75-88 60-80 20-45 31-36 121-185  B68-90  30T62-75 15-19
    1/2 H(TD02) 85-100 75-95 12-30 32-38 176-216  B88-96  30T74-79 15-19
    H (TD04) 100-120 90-115 2-18 35-39 216-287  B96-102  30T79-83 15-19
    AT (TF00) 3 hr. at 600 °F 165-195 140-175 3-15 40-45 353-413 C36-42  30N56-62 22-28
    1/4 HT (TH01)  2 hr. at 600 °F 175-205 150-185 3-10 40-45 353-424  C36-43  30N56-63 22-28
    1/2 HT (TH02) 2 hr. at 600 °F 185-215 160-195 1-8  42-47 373-435  C38-44 30N58-63 22-28
    HT (TH04) 2 hr. at 600 °F 190-220 165-205 1-6  45-50 373-446  C38-45  30N58-65 22-28
    Beryllium Copper Physical Properties 190 C17200
       Yield Strength 108 Cycles

    ksi

    Hardness
    Temper Heat Treatment Tensile Strength ksi 0.2% offset ksi Elongation % Fatigue Strength Diamond Pyramid Rockwell B or C Rockwell Superficial Electrical Conductivity % IACS
    AM (TM00) Mill Hardened 100-110 70-95 16-30 40-45 210-251 B95-C23 30N37-44 17-28
    1/4 HM (TM01) Mill Hardened 110-120 80-110 15-25 41-47 230-271 C20-26 30N41-47 17-28
    1/2 HM (TM02) Mill Hardened 120-135 95-125 12-22 42-48 250-301 C23-30 30N44-51 17-28
    HM (TM04) Mill Hardened 135-150 110-135 9-20 45-52 285-343 C28-35 30N48-55 17-28
    SHM (TM05) Mill Hardened 150-160 125-140 9-18 47-55 309-363 C31-37 30N52-56 17-28
    XHM (TM06) Mill Hardened 155-175 135-170 4-15 50-57 317-378 C32-38 30N52-58 17-28
    XHMS (TM08) Mill Hardened 175-190 150-180 3-12 50-60 325-413 C33-42 30N53-62 17-28
    Beryllium Copper Physical Properties 290 C17200
       Yield Strength 108 Cycles

    ksi

    Hardness
    Temper Heat Treatment Tensile Strength ksi 0.2% offset ksi Elongation % Fatigue Strength Diamond Pyramid Rockwell B or C Rockwell Superficial Electrical Conductivity % IACS
    TM00 Mill Hardened 100 min 75-95  19-35  40-45  225-309  B98-C31  30T81-30N52  17-26
    TM02 Mill Hardened  120 min  95-115  14-30  42-48  255-339  C25-34  30N46-54  17-26
    TM04 Mill Hardened  140 min  115-135  9-25  44-50  285-369  C28-38  30N48-58  17-26
    TM06 Mill Hardened  155 min  135-155  6-13  47-57  317-393 C32-40  30N52-60  17-26
    TM08 Mill Hardened  175 min  155-175  3-15  50-60  345-429  C35-43  30N55-62  17-26
    Beryllium Copper Physical Properties 174 C17410
       Yield Strength 108 Cycles

    ksi

    Hardness
    Temper Heat Treatment Tensile Strength ksi 0.2% offset ksi Elongation % Fatigue Strength Diamond Pyramid Rockwell B or C Rockwell Superficial Electrical Conductivity % IACS
    1/2 HT (TH02)  Mill Hardened 95-115  80-100  10-20  40-45 180-230  B89-98  30T75-81.9  50 min
     HT (TH04)  Mill Hardened  110-130  100-120  7-17  40-45  210-278  B95-102  30T79-30N48  45-60
    Beryllium Copper Physical Properties 3 C17510
       Yield Strength 108 Cycles

    ksi

    Hardness
    Temper Heat Treatment Tensile Strength ksi 0.2% offset ksi Elongation % Fatigue Strength Diamond Pyramid Rockwell B or C Rockwell Superficial Electrical Conductivity % IACS
    A (TB00) - 35-55 20-45 20-40 20-30 65-125 B20-45 30T28-45 20-30
    H (TD04) - 70-85 55-80 2-10 25-35 144-176 B78-88 30T69-75 20-30
     AT (TF00)  Mill Hardened  100-130  80-100  10-25  38-44  195-275  B92-100  30T77-82 45-60
     HT (TH04)  Mill Hardened  110-135  95-120  8-20  42-47  216-287  B95-102  30T79-83  48-60
    Beryllium Copper Physical Properties Brush 60 C17460
       Yield Strength 108 Cycles

    ksi

    Hardness
    Temper Heat Treatment Tensile Strength ksi 0.2% offset ksi Elongation % Fatigue Strength Diamond Pyramid Rockwell B or C Rockwell Superficial Electrical Conductivity % IACS
    3/4 HT (TH03)  Mill Hardened  115-135  95-115  11min  46-47  50min
     HT (TH04)  Mill Hardened  120-140  105-125  10min  42-45  50min
    Copper Beryllium Strip Specifications
    Materion Brush Performance Alloys UNS Number Specification
     25  C1720  ASTM B194
     190  C17200  ASTM B194
     290  C17200  ASTM B194
     3  C17510  ASTM B534
     174  C17410  ASTM B768
     Brush 60 C17460  ASTM B768

     

    Beryllium Copper BeCu P2 | Beryllium Copper C1720P | Beryllium Copper C1720R | Beryllium Copper AMS 4530 | Beryllium Copper AMS 4532 | Beryllium Copper AMS 4533 | Beryllium Copper AMS 4534 | Beryllium Copper AMS 4535 | Beryllium Copper AMS 4650 | Beryllium Copper AMS 4651 | Beryllium Copper AMS 4725 | Beryllium Copper API Spec 7 | Beryllium Copper ASNA 3384 | Beryllium Copper ASNA 3400 | Beryllium Copper ASNA 3417 | Beryllium Copper ASNA 6110 | Beryllium Copper No.172 | Beryllium Copper ASTM B194 | Beryllium Copper ASTM B196 | Beryllium Copper ASTM B197 | Beryllium Copper ASTM B251 | Beryllium Copper ASTM B570 | Beryllium Copper ASTM B643 | Beryllium Copper BMS 7-353 | Beryllium Copper C1720B | Beryllium Copper CNS 10879 | Beryllium Copper CuBe2 | Beryllium Copper 2.1247 | Beryllium Copper CuBe2 DIN 17666 | Beryllium Copper CuBe2 DIN 17670 | Beryllium Copper CuBe2 DIN 17672 | Beryllium Copper CuBe2 DIN 17677 | Beryllium Copper CuBe2 DIN 17800 | Beryllium Copper CuBe2 DIN 17682 | Beryllium Copper CuBe2 DIN 17671 | Beryllium Copper DMS 1904 | Beryllium Copper DMS 2088 | Beryllium Copper CuBe2 | Beryllium Copper CW101C | Beryllium Copper EN 1654 | Beryllium Copper EN 2163 | Beryllium Copper EN 12163 | Beryllium Copper EN 12165 | Beryllium Copper EN 12166 | Beryllium Copper EN 12167 | Beryllium Copper EN 12420 | Beryllium Copper EN 13148 | Beryllium Copper EN 14436 | Beryllium Copper QBe 2 | Beryllium Copper GB3134 | Beryllium Copper GB4431 | Beryllium Copper GB5233 | Kobber-beryllium CuBe2 | | Beryllium Copper CuBe2 ISO R1187 | Beryllium Copper CuBe2 ISO R1983 | Beryllium Copper BeCu P2 | Beryllium Copper C1720B | Beryllium Copper C1720P | Beryllium Copper C1720R | Beryllium Copper BeCu P2 JIS H 3130 | Beryllium Copper BeCu P2 JIS H 3270 | Beryllium Copper BeCu W2 JIS H 3801 | Beryllium Copper BeCu W2 JIS H 3802 | Beryllium Copper BeCu W2 JIS H 3803 | Beryllium Copper KS C1720 | Beryllium Copper MIL-C-21657 | Beryllium Copper Br Be NBN 66.51 | Beryllium Copper Cu Be2 Co Ni NCH 252 of 68 | Beryllium Copper Cu Be2 Co Ni NCH 259 of 70 | Beryllium Copper NFL-14709 | Beryllium Copper NF A51-114 | Beryllium Copper Cu-Be2 Co Ni NEN 6030 | Beryllium Copper Cu-Be2 Co Ni NEN 6033 | Beryllium Copper C1720 | Beryllium Copper QQ-C-530 | Beryllium Copper QQ-C-533 | Beryllium Copper RWMA Class 4 | Beryllium Copper SAE J461 | Beryllium Copper SAE J463 | Beryllium Copper UNS C17200 | Beryllium Copper Werkstoff Nr.2.1247 | Beryllium Copper Brush 190 | Beryllium Copper Mallory | Beryllium Copper Berylco

     


  • Previous:
  • Next:

  • Material Grade

    Material ASTM A240 Standard 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
    ASTM A480 Standard 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
    JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630  
    JIS G4305 Standard SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A

    Product Specification

    Finish Thickness Characteristics Applications
    No. 1 3.0mm~50.0mm Finished by hot-rolling, annealing and pickling, characterized by white pickled surface Chemical industry equipment, Industrial tanks
    No. 2B 0.3mm~6.0mm Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface General Application Medical Instruments, Tableware
    No. BA (Bright Annealed) 0.5mm~2.0mm Bright heat treatment after cold rolling Kitchen utensil, kitchen ware, architectural purpose
    No. 4 0.4mm~3.0mm Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes Milk & Food processing facilities, Hospital Equipment, Bath-tub
    No. 8 0.5mm~2.0mm A mirror-like reflective surface by polishing with finer abrasives over 800 mesh Reflector, Mirror, Interior-Exterior decoration forbuilding
    HL(Hair Line) 0.4mm~3.0mm Finished by continuous linear polishing Architectural purposes, escalators, kitchen ware vehicles

    Chemical Composition

    Grade

    C

    Si

    Mn

    P

    S

    Cr

    Ni

    Mo

    Ti

    N

    Cu

    Nb

    201

    ≤0.15

    ≤1.0

    5.50-7.50

    ≤0.05

    ≤0.03

    16.00-18.00

    3.50-5.50

    -

    -

    0.05-0.25

    -

    -

    202

    ≤0.15

    ≤1.0

    7.50-10.00

    ≤0.05

    ≤0.03

    17.00-19.00

    4.00-6.00

    -

    -

    0.05-0.25

    -

    -

    301

    ≤0.15

    ≤1.0

    ≤2.0

    ≤0.045

    ≤0.03

    16.00-18.00

    6.00-8.00

    -

    -

    ≤0.1

    -

    -

    302

    ≤0.15

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    8.00-10.00

    -

    -

    ≤0.1

    -

    -

    303

    ≤0.15

    ≤1.0

    ≤2.0

    ≤0.2

    ≥0.15

    17.00-19.00

    8.00-10.00

    ≤0.6

    -

    ≤0.1

    -

    -

    304

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    8.00-10.00

    -

    -

    -

    -

    -

    304L

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    8.00-10.00

    -

    -

    -

    -

    -

    304H

    0.04-0.1

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    8.00-10.00

    -

    -

    -

    -

    -

    304N

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    8.00-10.00

    -

    -

    0.10-0.16

    -

    -

    304J1

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    6.00-9.00

    -

    -

    -

    1.00-3.00

    -

    305

    ≤0.12

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    10.50-13.00

    -

    -

    -

    -

    -

    309S

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    22.00-24.00

    12.00-15.00

    -

    -

    -

    -

    -

    310S

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    24.00-26.00

    19.00-22.00

    -

    -

    -

    -

    -

    316

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-18.00

    10.00-14.00

    2.00-3.00

    -

    -

    -

    -

    316L

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-18.00

    12.00-15.00

    2.00-3.00

    -

    -

    -

    -

    316H

    ≤0.1

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-18.00

    10.00-14.00

    2.00-3.00

    -

    -

    -

    -

    316N

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-18.00

    10.00-14.00

    2.00-3.00

    -

    0.10-0.16

    -

    -

    316Ti

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    16.00-19.00

    11.00-14.00

    2.00-3.00

    ≥5C

    -

    -

    -

    317L

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    18.00-20.00

    11.00-15.00

    3.00-4.00

    -

    -

    -

    -

    321

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    9.00-12.00

    -

    5C-0.7

    -

    -

    -

    347

    ≤0.08

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    9.00-12.00

    -

    -

    -

    -

    10C-1.10

    347H

    ≤0.1

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    17.00-19.00

    9.00-12.00

    -

    -

    -

    -

    8C-1.10

    2205

    ≤0.03

    ≤1.0

    ≤2.0

    ≤0.035

    ≤0.03

    21.00-24.00

    4.50-6.50

    2.50-3.50

    -

    0.08-0.20

    -

    -

    2507

    ≤0.03

    ≤0.8

    ≤1.2

    ≤0.035

    ≤0.02

    24.00-26.00

    6.00-8.00

    3.00-5.00

    -

    0.24-0.32

    -

    -

    904L

    ≤0.02

    ≤1.0

    ≤2.0

    ≤0.045

    ≤0.03

    19.00-23.00

    23.00-28.00

    4.00-5.00

    -

    -

    1.00-2.00

    -

    C276

    ≤0.02

    ≤0.05

    ≤1.0

    -

    -

    14.00-16.50

    Other

    -

    -

    -

    -

    -

    Monel400

    ≤0.3

    ≤0.5

    ≤2.0

    -

    ≤0.024

    -

    ≥63

    -

    -

    -

    28-34

    -

    409L

    ≤0.03

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    17.00-19.00

    -

    -

    -

    -

    -

    -

    410

    ≤0.15

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    11.50-13.50

    -

    -

    -

    -

    -

    -

    410L

    ≤0.03

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    11.50-13.50

    -

    -

    -

    -

    -

    -

    420J1

    0.16-0.25

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    12.00-14.00

    -

    -

    -

    -

    -

    -

    420J2

    0.26-0.40

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    12.00-14.00

    -

    -

    -

    -

    -

    -

    430

    ≤0.12

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    -

    -

    -

    -

    -

    436L

    ≤0.025

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-19.00

    -

    -

    -

    -

    -

    -

    439

    ≤0.03

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    -

    -

    -

    -

    -

    440A

    0.60-0.75

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    ≤0.75

    -

    -

    -

    -

    440B

    0.75-0.95

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    ≤0.75

    -

    -

    -

    -

    440C

    0.95-1.2

    ≤1.0

    ≤1.0

    ≤0.035

    ≤0.03

    16.00-18.00

    -

    ≤0.75

    -

    -

    -

    -

    441

    ≤0.03

    0.2-0.8

    ≤0.7

    ≤0.03

    ≤0.015

    17.50-18.50

    -

    ≤0.5

    0.1-0.5

    ≤0.025

    -

    0.3+3C-0.9

    We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.

     Identification labels are tagged accordingto standard specification or customer’s instructions. 

    Special packing is available as per customer’s requirement.

    Stainless Steel Coil Package

    cepheus stainless steel coil package (1)

    cepheus stainless steel coil package (2)

     

    Stainless Steel Sheet / Stainless Steel Plate Package

    cepheus stainless steel  sheet package (3)

    cepheus stainless steel plate 1_副本

     

    Stainless Steel Strip Package

    cepheus stainless steel  strip package (5)

    Shipment Package

    Cepheus Stainless Steel Shipment (1)

    Cepheus Stainless Steel Shipment (2)

    Cepheus Stainless Steel Shipment (3)

    Our company is based in Wuxi,  gathering city of industrial stainless steel in China.

    We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.

    Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers. 

    Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,

    Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys

     

    In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.

    wuxi cepheus stainless steel (1)

     

    wuxi cepheus stainless steel (5)

    wuxi cepheus stainless steel (4)

    wuxi cepheus stainless steel (3)

     

    wuxi cepheus stainless steel (2)

     

    Q1: What is stainless?

    A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.

    Q2: Does stainless mean no rusting?

    A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.

    Q3: Do you supply stainless steel sheets?

    A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.

    Q4: Do you accept cut to length service?

    A: Of course, customer’s satisfaction is our top priority.

    Q5: If i have a small order, do you accept small order?

    A: Not a problem, your concern is our concern, small quantities are accepted.

    Q6: How can you guarantee your product quality?

    A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.

    Q7: Will you pack the products?

    A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.

    Q8: What do you need to know from customer before accurate quotation?

    A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.

    Q9: What kind of payment term you accpet?

    A: We accept T/T, West union, L/C.

    Q10: If this is a small order, will you delivery the goods to our agent?

    A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.

    Q11: Do you just make flat sheet? I want to make a fabrication for my new project.

    A:  No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.

    Q12: How many coutries you already exported ?
    A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
          Turkey, Jordan, etc.
    Q13: How can I get some samples?
    A: Small samples in store and can provide the samples for free. Catalgue is available, most
          patterns we have ready samples in stock. Customized samples will take about 5-7days.
    Q14: What is the delivery ?
    A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.

    Q15: What is the application about your Products?
    A:  1.elevator door/cabin or and escalator’s side-wall.
          2.Wall cladding inside or outside meeting room/ restaurant.
          3.Facade when cladding over something, like columns in the lobby.
          4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
    Q16: How long Can You Guarantee for This Product/Finish?
    A: Color guarantee for more than 10 years. Original materials quality certificate can
           be provided.

  • Related Products