C68700 Cuzn20al2as Aluminum Brass Tube for Condensor System

As a professional brass tubes/pipes manufacturer, we produce the pipes made up of  brass in various component types, like brass tubes C44300, C68700, C27000, etc. ASTM B111 C68700 brass tube has especially good corrosion resistance properties in sea water. C44300 Tube and C68700 Tube have good corrosion resistance. C68700 annealed in O61 Temper. Tensile strength minimum in 345Mpa, Yield Strength minimum in 125Mpa.

Admiralty Brass tube

1.   Standard:  ASTM B111, JIS H3300, BS EN 12451, EN 12449, GB/T8890 etc.

2.   Quality:  bright ,clean and smmoth in the surface;  No burr in the end ;

3.  Temper:   Bright anneal,half hard,and hard drawn

4.   Size:   O.D 4.5 mm to O.D 80 mm;     Length Max 24m;

5.   Process method: Extrusion and cold drawn.

Process of admiralty Brass Tube
Meltting → Casting → Extruding → Rolling → Drawing → Peelling → Streghtening →

Finish Cutting and End Deburring → Eddy Current Testing → Anealling →End Product Testing

and Inspection →Packing→Shipping

6.  Feature:  is strong corrosion-resistant alloy for harsh environments

7.  Allpications: are widely used in Steam Turbines, Seawater Desalination Equipments, Petrochemical Plants, Power Plants, Coolers, Boiler, Water Evaporators, Oil Refineries, and Shipbuilding&repair,offshore engineering,shell tubes heat exchnager.Marine air cooler.

8. Material Designation Applied: 

9.  Packing &Shipping:
Seaworthy Plywooden Case, Wooden case ,Plastic Bundle Waterproof Paper Or Any Required per customer.

10. Lead time: 10days exmill under 5 MT,as for more than 10 Mt, Prompt Delivery According To Quantity;

11. Quality Control of Admiralty Brass tube:   

1) Full Controlled by ISO system
2) Chemical analysis before casting
3) Eddy current testing
4) Dimension check
5) Tensile test (Tensile strength, yield strength, elongation)
6) Expansion test
7) Hardness test
8) Microscopically examination

Material Grade

Product Specification

Chemical Composition

We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.

 Identification labels are tagged accordingto standard specification or customer’s instructions. 

Special packing is available as per customer’s requirement.

Stainless Steel Coil Package

Stainless Steel Sheet / Stainless Steel Plate Package

Stainless Steel Strip Package

Shipment Package

Our company is based in Wuxi,  gathering city of industrial stainless steel in China.

We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.

Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers. 

Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,

Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys

In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.

Q1: What is stainless?

A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.

Q2: Does stainless mean no rusting?

A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.

Q3: Do you supply stainless steel sheets?

A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.

Q4: Do you accept cut to length service?

A: Of course, customer’s satisfaction is our top priority.

Q5: If i have a small order, do you accept small order?

A: Not a problem, your concern is our concern, small quantities are accepted.

Q6: How can you guarantee your product quality?

A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.

Q7: Will you pack the products?

A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.

Q8: What do you need to know from customer before accurate quotation?

A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.

Q9: What kind of payment term you accpet?

A: We accept T/T, West union, L/C.

Q10: If this is a small order, will you delivery the goods to our agent?

A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.

Q11: Do you just make flat sheet? I want to make a fabrication for my new project.

A:  No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.

Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
      Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
      patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.

Q15: What is the application about your Products?
A:  1.elevator door/cabin or and escalator’s side-wall.
      2.Wall cladding inside or outside meeting room/ restaurant.
      3.Facade when cladding over something, like columns in the lobby.
      4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
       be provided.