bar crwn dur di-staen
Disgrifiad Byr:
Dur di-staen wedi'i rolio'n boeth ac wedi'i Anelio a'i Biclo ongl:
Maint sydd ar gael:
| Lled (mm) | Trwch (mm) | ||||
| 20*20 | 3 | ||||
| 25*25 | 3 | 4 | 5 | ||
| 30*30 | 3 | 4 | 5 | ||
| 40*40 | 3 | 4 | 5 | 6 | |
| 50*50 | 3 | 4 | 5 | 6 | 7 |
| 60*60 | 5 | 6 | 7 | 8 | |
| 65*65 | 5 | 6 | 7 | 8 | |
| 70*70 | 6 | 7 | 8 | 9 | 10 |
| 75*75 | 6 | 7 | 8 | 9 | 10 |
| 80*80 | 7 | 8 | 9 | 10 | |
| 100*100 | 8 | 9 | 10 | 12 | |
2. Sianel U dur di-staen
Sianel U wedi'i rolio'n boeth Meintiau sydd ar gael (mm):
| Trwch | Uchder | Lled | ||
| 3 | 5 | 6 | 80 | 40 |
| 4 | 5 | 6 | 100 | 50 |
| 5 | 6 | 7 | 120 | 50 |
| 6 | 7 | 140 | 60 | |
Sianel U wedi'i weldio Meintiau sydd ar gael (mm):
| Trwch | Uchder | Lled | |||||||||||||||
| 3 | 4 | 5 | 50 | 55 | 60 | 65 | 70 | 75 | 25 | ||||||||
| 3 | 4 | 5 | 60 | 65 | 70 | 75 | 80 | 30 | |||||||||
| 3 | 4 | 5 | 80 | 85 | 90 | 95 | 100 | 105 | 110 | 115 | 120 | 125 | 130 | 135 | 140 | 145 | 40 |
| 150 | 155 | 160 | 165 | 170 | 175 | 180 | |||||||||||
| 4 | 5 | 6 | 100 | 105 | 110 | 115 | 120 | 125 | 135 | 140 | 145 | 150 | 155 | 160 | 50 | ||
| 165 | 170 | 175 | 180 | 185 | 190 | 195 | 200 | 205 | 210 | 215 | 220 | ||||||
| 5 | 6 | 7 | 120 | 125 | 130 | 135 | 140 | 145 | 150 | 155 | 160 | 165 | 170 | 175 | 180 | 60 | |
| 185 | 190 | 195 | 200 | 205 | 210 | 215 | 220 | 225 | 230 | 235 | 240 | ||||||
| 6 | 7 | 8 | 140 | 145 | 150 | 155 | 160 | 165 | 170 | 175 | 180 | 185 | 190 | 200 | 70 | ||
| 205 | 210 | 215 | 220 | 225 | 230 | 235 | 240 | 245 | 250 | 255 | 260 | ||||||
| 6 | 7 | 9 | 150 | 155 | 160 | 165 | 170 | 175 | 180 | 185 | 190 | 195 | 200 | 205 | 210 | 75 | |
| 215 | 220 | 225 | 230 | 235 | 240 | 245 | 250 | 255 | 260 | 265 | 270 | ||||||
| 7 | 8 | 10 | 160 | 165 | 170 | 175 | 180 | 185 | 190 | 195 | 200 | 205 | 210 | 215 | 220 | 80 | |
| 225 | 230 | 235 | 240 | 245 | 250 | 255 | 260 | 265 | 270 | 275 | 289 | ||||||
| 8 | 9 | 12 | 200 | 205 | 210 | 215 | 220 | 225 | 235 | 240 | 245 | 250 | 255 | 260 | 100 | ||
| 265 | 270 | ||||||||||||||||
Cyfansoddiad cemegol
| Gradd | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Arall | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Gradd Deunydd
| Deunydd | Safon ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 4 |
| Safon ASTM A480 | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| Safon JIS 4304-2005 | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| Safon JIS G4305 | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Manyleb Cynnyrch
| Gorffen | Trwch | Nodweddion | Cymwysiadau |
| Rhif 1 | 3.0mm ~ 50.0mm | Wedi'i orffen trwy rolio poeth, anelio a phiclo, wedi'i nodweddu gan arwyneb piclo gwyn | Offer diwydiant cemegol, tanciau diwydiannol |
| Rhif 2B | 0.3mm~6.0mm | Wedi'i orffen trwy driniaeth wres, piclo ar ôl rholio oer, ac yna llinell basio croen i fod yn arwyneb mwy disglair a llyfn | Offerynnau Meddygol Cymhwysiad Cyffredinol, Llestri Bwrdd |
| Rhif BA (Anelio Llachar) | 0.5mm ~ 2.0mm | Triniaeth gwres llachar ar ôl rholio oer | Offeryn cegin, nwyddau cegin, pwrpas pensaernïol |
| Rhif 4 | 0.4mm ~ 3.0mm | Sgleinio gyda sgraffinyddion rhwyll Rhif 150 i Rhif 180. Y gorffeniadau mwyaf poblogaidd. | Cyfleusterau prosesu llaeth a bwyd, Offer ysbyty, bathtwb |
| Rhif 8 | 0.5mm ~ 2.0mm | Arwyneb adlewyrchol tebyg i ddrych trwy sgleinio â sgraffinyddion mwy mân dros 800 rhwyll | Adlewyrchydd, Drych, Addurno Mewnol-Allanol ar gyfer adeiladu |
| HL (Llinell Gwallt) | 0.4mm ~ 3.0mm | Wedi'i orffen trwy sgleinio llinol parhaus | Dibenion pensaernïol, grisiau symudol, cerbydau offer cegin |
Cyfansoddiad Cemegol
| Gradd | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Arall | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Nilapio'r cynhyrchion dur di-staen gyda phapur gwrth-rwd a modrwyau dur i atal difrod.
Mae labeli adnabod wedi'u tagio yn unol â manyleb safonol neu gyfarwyddiadau'r cwsmer.
Mae pecynnu arbennig ar gael yn unol â gofynion y cwsmer.
Pecyn Coil Dur Di-staen
Pecyn Dalen Dur Di-staen / Plât Dur Di-staen
Pecyn Strip Dur Di-staen
Pecyn Cludo
Mae ein cwmni wedi'i leoli yn Wuxi, dinas casglu dur di-staen diwydiannol yn Tsieina.
Roeddem yn arbenigo mewn coiliau, dalennau a phlatiau dur di-staen, pibellau a ffitiadau dur di-staen, tiwbiau dur di-staen, a chynhyrchion alwminiwm a chynhyrchion copr hefyd.
Mae ein cynnyrch wedi cael canmoliaeth uchel gan ein cleientiaid o Ewrop, America, y Dwyrain Canol, Affrica a De-ddwyrain Asia. Byddwn yn cynnig cynhyrchion cystadleuol a gwasanaeth cynhwysfawr i gwsmeriaid.
Gradd Dur Di-staen: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Gradd Aloi: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titaniwm, Tantalwm, Dur Cyflymder Uchel, Dur Ysgafn, Alwminiwm, Dur Aloi, Dur Carbon, Aloion Nicel Arbennig
Ar ffurf: Bariau Crwn, Bariau Sgwâr, Bariau Hecsagonol, Bariau Gwastad, Onglau, Sianeli, Proffiliau, Gwifrau, Gwiail Gwifren, Taflenni, Platiau, Pibellau Di-dor, Pibellau ERW, Fflansau, Ffitiadau, ac ati.
C1: Beth yw dur gwrthstaen?
A: Mae dur di-staen yn golygu dim marciau ar wyneb y dur, neu fath o ddur nad yw'n cael ei ddifrodi gan aer na dŵr ac nad yw'n newid lliw, yn ddi-smotyn, yn gwrthsefyll staenio, rhydu, effaith cyrydol cemegau.
C2: A yw dur gwrthstaen yn golygu dim rhydu?
A: Na, mae dur gwrthstaen yn golygu nad yw'n hawdd cael ei staenio na'i rhydu, mae ganddo allu arbennig i wrthsefyll staenio, rhydu a chorydiad.
C3: Ydych chi'n cyflenwi dalennau dur di-staen?
A: Ydym, rydym yn cyflenwi gwahanol fathau o ddalennau dur di-staen, gyda thrwch yn amrywio o 0.3-3.0mm. ac mewn gwahanol orffeniadau.
C4: Ydych chi'n derbyn gwasanaeth torri i hyd?
A: Wrth gwrs, boddhad cwsmeriaid yw ein blaenoriaeth uchaf.
C5: Os oes gen i archeb fach, a ydych chi'n derbyn archeb fach?
A: Dim problem, eich pryder chi yw ein pryder ni, derbynnir meintiau bach.
C6: Sut allwch chi warantu ansawdd eich cynnyrch?
A: Yn gyntaf, o'r cychwyn cyntaf, rydym eisoes wedi gweithredu ysbryd i'w meddwl, hynny yw ansawdd yw bywyd, bydd ein gweithwyr proffesiynol a'n staff yn dilyn pob cam nes bod y nwyddau wedi'u pacio'n dda a'u cludo allan.
C7: A wnewch chi bacio'r cynhyrchion?
A: Mae pobl broffesiynol yn gwneud pacio proffesiynol, mae gennym wahanol fathau o bacio dewisol i gwsmeriaid, un economaidd neu un gwell.
C8: Beth sydd angen i chi ei wybod gan y cwsmer cyn dyfynbris cywir?
A: I gael dyfynbris cywir, mae angen i ni wybod gradd, trwch, maint, gorffeniad wyneb, lliw a nifer eich archeb, a hefyd cyrchfan y nwyddau. Bydd angen mwy o wybodaeth am y cynnyrch wedi'i haddasu, fel lluniad, cynllun a chynllun. Yna byddwn yn cynnig dyfynbris cystadleuol gyda'r wybodaeth uchod.
C9: Pa fath o derm talu rydych chi'n ei dderbyn?
A: Rydym yn derbyn T/T, undeb Gorllewinol, L/C.
C10: Os yw hwn yn archeb fach, a fyddwch chi'n danfon y nwyddau i'n hasiant?
A: Ydym, rydym wedi ein geni i ddatrys problemau ein cwsmeriaid, byddwn yn cael y nwyddau'n ddiogel i warws eich asiant ac yn anfon y lluniau atoch.
C11: Ydych chi'n gwneud dalen fflat yn unig? Rwyf am wneud ffugio ar gyfer fy mhrosiect newydd.
A: Na, rydym yn cynhyrchu triniaeth arwyneb dalen fflat dur di-staen yn bennaf, ar yr un pryd, rydym yn cynhyrchu cynnyrch gorffenedig metel wedi'i addasu yn unol â llun a chynllun y cwsmer, bydd ein technegydd yn gofalu am y gweddill.
C12: Faint o wledydd rydych chi eisoes wedi'u hallforio?
A: Wedi'i allforio i fwy na 50 o wledydd yn bennaf o America, Rwsia, y DU, Kuwait, yr Aifft, Iran,
Twrci, Gwlad Iorddonen, ac ati.
C13: Sut alla i gael rhai samplau?
A: Samplau bach yn y siop a gallwn ddarparu'r samplau am ddim. Mae catalog ar gael, y rhan fwyaf
patrymau mae gennym samplau parod mewn stoc. Bydd samplau wedi'u haddasu yn cymryd tua 5-7 diwrnod.
C14: Beth yw'r dosbarthiad?
A: Amser dosbarthu archeb sampl yw 5-7 diwrnod. Mae archebion cynwysyddion tua 15-20 diwrnod.
C15: Beth yw'r cymhwysiad am eich Cynhyrchion?
A: 1. drws/caban y lifft neu wal ochr y grisiau symudol.
2. Cladio wal y tu mewn neu'r tu allan i ystafell gyfarfod/bwyty.
3. Ffasâd wrth gladio dros rywbeth, fel colofnau yn y cyntedd.
4. Nenfwd yn yr archfarchnad. 5. Lluniadau addurniadol mewn rhai lleoedd adloniant.
C16: Am ba hyd allwch chi warantu'r cynnyrch/gorffeniad hwn?
A: Gwarant lliw am fwy na 10 mlynedd. Gall tystysgrif ansawdd deunyddiau gwreiddiol gael ei rhoi.
cael ei ddarparu.
