316L Stainless Steel Plate
Breve descripción:
316L Stainless Steel Plate
316L Stainless steel plate can be made by hot rolling, including the thickness of 8.0-120mm slab.
Hot-rolled stainless steel plate is not as good as cold-rolled in mechanical properties, but there are good toughness and ductility. Cold-rolled stainless steel plate is low in toughness due to the good hardening.
A fin de asegurar todas las clases de resistencia de acero inoxidable elástico, resistencia a la tracción, alargamiento y dureza y otras propiedades mecánicas para satisfacer las necesidades, antes de la entrega debe ser recocido de acero inoxidable, tratamiento en solución, tratamiento térmico de envejecimiento.
316L Stainless Steel Plate Material Grade
Material | ASTM A240 Estándar | 304 304L 304H 309H 309S 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347H 347 409 410 430 410S 904L |
JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316 / 316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
JIS G4305 Estándar | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420j2, SUS440A | |
316L Stainless Steel Plate Especificaciones del producto
Terminar | Espesor | características | aplicaciones |
No. 1 | 3.0mm ~ 50.0mm | Terminado por laminado en caliente, recocido y decapado, caracterizado por el blanco superficie decapada | Equipamiento para la industria química, tanques industriales |
No. 2B | 0.3mm ~ 6.0mm | Terminado por tratamiento térmico, decapado después de la laminación en frío, seguido por la línea de paso de piel a ser más brillante y superficie lisa | Aplicación General Medical Instruments, Vajilla |
316L Stainless Steel Plate Los tamaños estándar
tamaño | Espesor: 8-120mm (laminados en caliente listón) |
Anchura: 1219 mm, 1500 mm, 1800 mm, 2000 mm | |
Longitud: 2438 mm, 3000 mm, 6000 mm o como requisitos de clientes |
316L Stainless Steel Plate Composición química
Grado |
do |
Si |
Minnesota |
PAG |
S |
cr |
Ni |
Mes |
Ti |
norte |
Cu |
Nótese bien |
201 |
≤0.15 |
≤1.0 |
5,50-7,50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3,50-5,50 |
- |
- |
0,05-0,25 |
- |
- |
202 |
≤0.15 |
≤1.0 |
7,50-10,00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4,00-6,00 |
- |
- |
0,05-0,25 |
- |
- |
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6,00-8,00 |
- |
- |
≤0.1 |
- |
- |
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304H |
0,04-0,1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0,10-0,16 |
- |
- |
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6,00-9,00 |
- |
- |
- |
1,00-3,00 |
- |
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10,50-13,00 |
- |
- |
- |
- |
- |
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22,00-24,00 |
12.00-15.00 |
- |
- |
- |
- |
- |
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24,00-26,00 |
19.00-22.00 |
- |
- |
- |
- |
- |
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0,10-0,16 |
- |
- |
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11,00-15,00 |
3.00-4.00 |
- |
- |
- |
- |
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0,7 |
- |
- |
- |
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4,50-6,50 |
2,50-3,50 |
- |
0.08-0.20 |
- |
- |
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24,00-26,00 |
6,00-8,00 |
3,00-5,00 |
- |
0,24-0,32 |
- |
- |
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19,00-23,00 |
23,00-28,00 |
4,00-5,00 |
- |
- |
1.00-2.00 |
- |
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14,00-16,50 |
Otro |
- |
- |
- |
- |
- |
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50-13,50 |
- |
- |
- |
- |
- |
- |
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50-13,50 |
- |
- |
- |
- |
- |
- |
420J1 |
0,16 a 0,25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
420J2 |
0,26-0,40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
440A |
0,60-0,75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440B |
0,75-0,95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440C |
0,95-1,2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
441 |
≤0.03 |
0,2-0,8 |
≤0.7 |
≤0.03 |
≤0.015 |
17,50-18,50 |
- |
≤0.5 |
0,1-0,5 |
≤0.025 |
- |
0,3 + 3C-0,9 |
We are a stainless steel supplier from greater China providing outstanding customer service and high-quality products while specializing in stainless steel sheet, stainless steel plate, stainless steel pipe, stainless steel tube, stainless steel pipe, stainless steel round bar, stainless steel flat bar, stainless steel angle bar,etc.
We also supply any other stainless steel plate,stainless steel sheet and stainless steel pipe as follows:
X 316L stainless steel plateX Bobina de acero inoxidable 316LX Hoja de acero inoxidable 316lX 316l Seamless Pipe Acero inoxidableX 316l de tubos de acero inoxidable SanitoryX Tubos de acero inoxidable 316lsseamlessX 316l acero inoxidable TuboX 316l tubos de acero inoxidableX 316l rectángulo de tubos de acero inoxidableX 316l acero inoxidable hueco de tuberías
Grado del material
Material | ASTM A240 Estándar | 201, 304 304L 304H 309H 309S 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347H 347 409 410 430 410S 904L |
ASTM A480 Estándar | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
JIS G4305 Estándar | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420j2, SUS440A |
Especificaciones del producto
Terminar | Espesor | características | aplicaciones |
No. 1 | 3.0mm ~ 50.0mm | Terminado por laminado en caliente, recocido y decapado, caracterizado por el blanco superficie decapada | Equipamiento para la industria química, tanques industriales |
No. 2B | 0.3mm ~ 6.0mm | Terminado por tratamiento térmico, decapado después de la laminación en frío, seguido por la línea de paso de piel a ser más brillante y superficie lisa | Aplicación General Medical Instruments, Vajilla |
No. BA (brillante recocido) | 0.5mm ~ 2.0mm | tratamiento térmico brillante después de laminación en frío | utensilio de cocina, utensilios de cocina, el propósito de arquitectura |
No. 4 | 0.4mm ~ 3.0mm | Pulido con el número 150 a los abrasivos de malla Nº 180. Los acabados más populares | Leche y de procesamiento de alimentos instalaciones, equipos para hospital para bañera |
Nº 8 | 0.5mm ~ 2.0mm | Una superficie reflectante como un espejo puliendo con abrasivos más finos más de 800 de malla | Reflector, espejo, interior-exterior decoración forbuilding |
HL (Hair Line) | 0.4mm ~ 3.0mm | Terminado por pulido lineal continuo | propósitos, escaleras mecánicas, vehículos de mercancías de la cocina arquitectónicas |
Composición química
Grado |
do |
Si |
Minnesota |
PAG |
S |
cr |
Ni |
Mes |
Ti |
norte |
Cu |
Nótese bien |
201 |
≤0.15 |
≤1.0 |
5,50-7,50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3,50-5,50 |
- |
- |
0,05-0,25 |
- |
- |
202 |
≤0.15 |
≤1.0 |
7,50-10,00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4,00-6,00 |
- |
- |
0,05-0,25 |
- |
- |
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6,00-8,00 |
- |
- |
≤0.1 |
- |
- |
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304H |
0,04-0,1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0,10-0,16 |
- |
- |
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6,00-9,00 |
- |
- |
- |
1,00-3,00 |
- |
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10,50-13,00 |
- |
- |
- |
- |
- |
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22,00-24,00 |
12.00-15.00 |
- |
- |
- |
- |
- |
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24,00-26,00 |
19.00-22.00 |
- |
- |
- |
- |
- |
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0,10-0,16 |
- |
- |
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11,00-15,00 |
3.00-4.00 |
- |
- |
- |
- |
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0,7 |
- |
- |
- |
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4,50-6,50 |
2,50-3,50 |
- |
0.08-0.20 |
- |
- |
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24,00-26,00 |
6,00-8,00 |
3,00-5,00 |
- |
0,24-0,32 |
- |
- |
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19,00-23,00 |
23,00-28,00 |
4,00-5,00 |
- |
- |
1.00-2.00 |
- |
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14,00-16,50 |
Otro |
- |
- |
- |
- |
- |
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50-13,50 |
- |
- |
- |
- |
- |
- |
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50-13,50 |
- |
- |
- |
- |
- |
- |
420J1 |
0,16 a 0,25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
420J2 |
0,26-0,40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
440A |
0,60-0,75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440B |
0,75-0,95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440C |
0,95-1,2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
441 |
≤0.03 |
0,2-0,8 |
≤0.7 |
≤0.03 |
≤0.015 |
17,50-18,50 |
- |
≤0.5 |
0,1-0,5 |
≤0.025 |
- |
0,3 + 3C-0,9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
Nos especializado en rollos de acero inoxidable, láminas y placa, tubo de acero inoxidable y accesorios, tubos de acero inoxidable, y también productos de aluminio y productos de cobre.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.