Factory making Black Stainless Steel Sheet - 304 stainless steel coil – Cepheus

Short Description:


Product Detail

Technical Specification

Product Package & Shipment

Company Introduction

Question & Answers

Product Tags

Related Video

Feedback (2)

Our primary intention should be to offer our clientele a serious and responsible enterprise relationship, delivering personalized attention to all of them for Stainless Steel Pipe Sanitary Fittings , Industry Stainless Steel Tube , Stainless Steel Profile , We sincerely look forward to hearing from you. Give us a chance to show you our professionalism and passion. We are sincerely welcome good friends from numerous circles at dwelling and abroad come to cooperate!
Factory making Black Stainless Steel Sheet - 304 stainless steel coil – Cepheus Detail:

Stainless Steel coil

Stainless steel coil can be made by hot rolling and cold rolling, including the thickness of 0.31-3.0 mm sheet and 3.0-30 mm plate.

Hot-rolled stainless steel is not as good as cold-rolled in mechanical properties, but there are good toughness and ductility. Cold-rolled stainless steel plate is low in toughness due to the good hardening.

In order to ensure all kinds of stainless steel yield strength, tensile strength, elongation and hardness and other mechanical properties to meet the requirements, prior to delivery must be stainless steel annealing, solution treatment, aging heat treatment.

Material Grade

Material ASTM A240 Standard 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
ASTM A480 Standard 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 
JIS G4305 Standard SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A

Product Specification

Finish Thickness Characteristics Applications
No. 1 3.0mm~50.0mm Finished by hot-rolling, annealing and pickling, characterized by white pickled surface Chemical industry equipment, Industrial tanks
No. 2B 0.3mm~6.0mm Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface General Application Medical Instruments, Tableware
No. BA (Bright Annealed) 0.5mm~2.0mm Bright heat treatment after cold rolling Kitchen utensil, kitchen ware, architectural purpose
No. 4 0.4mm~3.0mm Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes Milk & Food processing facilities, Hospital Equipment, Bath-tub
No. 8 0.5mm~2.0mm A mirror-like reflective surface by polishing with finer abrasives over 800 mesh Reflector, Mirror, Interior-Exterior decoration forbuilding
HL(Hair Line) 0.4mm~3.0mm Finished by continuous linear polishing Architectural purposes, escalators, kitchen ware vehicles

Standard sizes

Size Thickness: 0.15mm-3.00mm (Cold Rolled sheets); 4-30mm (Hot rolled plate)
Width:1000mm, 1219mm, 1250mm, 1500mm, 1800mm, 2000mm
Length: as coils

Chemical composition

Grade

C

Si

Mn

P

S

Cr

Ni

Mo

Ti

N

Cu

Nb

201

≤0.15

≤1.0

5.50-7.50

≤0.05

≤0.03

16.00-18.00

3.50-5.50

-

-

0.05-0.25

-

-

202

≤0.15

≤1.0

7.50-10.00

≤0.05

≤0.03

17.00-19.00

4.00-6.00

-

-

0.05-0.25

-

-

301

≤0.15

≤1.0

≤2.0

≤0.045

≤0.03

16.00-18.00

6.00-8.00

-

-

≤0.1

-

-

302

≤0.15

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

≤0.1

-

-

303

≤0.15

≤1.0

≤2.0

≤0.2

≥0.15

17.00-19.00

8.00-10.00

≤0.6

-

≤0.1

-

-

304

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

-

-

-

304L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304H

0.04-0.1

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304N

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

0.10-0.16

-

-

304J1

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

6.00-9.00

-

-

-

1.00-3.00

-

305

≤0.12

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

10.50-13.00

-

-

-

-

-

309S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

22.00-24.00

12.00-15.00

-

-

-

-

-

310S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

24.00-26.00

19.00-22.00

-

-

-

-

-

316

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

12.00-15.00

2.00-3.00

-

-

-

-

316H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316N

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

0.10-0.16

-

-

316Ti

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-19.00

11.00-14.00

2.00-3.00

≥5C

-

-

-

317L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

11.00-15.00

3.00-4.00

-

-

-

-

321

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

5C-0.7

-

-

-

347

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

10C-1.10

347H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

8C-1.10

2205

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

21.00-24.00

4.50-6.50

2.50-3.50

-

0.08-0.20

-

-

2507

≤0.03

≤0.8

≤1.2

≤0.035

≤0.02

24.00-26.00

6.00-8.00

3.00-5.00

-

0.24-0.32

-

-

904L

≤0.02

≤1.0

≤2.0

≤0.045

≤0.03

19.00-23.00

23.00-28.00

4.00-5.00

-

-

1.00-2.00

-

C276

≤0.02

≤0.05

≤1.0

-

-

14.00-16.50

Other

-

-

-

-

-

Monel400

≤0.3

≤0.5

≤2.0

-

≤0.024

-

≥63

-

-

-

28-34

-

409L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

17.00-19.00

-

-

-

-

-

-

410

≤0.15

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

410L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

420J1

0.16-0.25

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

420J2

0.26-0.40

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

430

≤0.12

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

436L

≤0.025

≤1.0

≤1.0

≤0.035

≤0.03

16.00-19.00

-

-

-

-

-

-

439

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

440A

0.60-0.75

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440B

0.75-0.95

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440C

0.95-1.2

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

441

≤0.03

0.2-0.8

≤0.7

≤0.03

≤0.015

17.50-18.50

-

≤0.5

0.1-0.5

≤0.025

-

0.3+3C-0.9


Product detail pictures:

Factory making Black Stainless Steel Sheet -
 304 stainless steel coil – Cepheus detail pictures


Related Product Guide:
Hollaender® Manufacturing Introduces Interna-Light™ Illuminated Railing | Stainless Steel Pipe Fittings
Global Duplex Stainless Steel Market Trends & Future Development Status Recorded | Posco Group, Acerinox S.A., Allegheny Technologies Incorporated, Jindal Steel & Power Ltd | Stainless Steel Pipe Fittings

We take pleasure in an exceptionally excellent status between our buyers for our superb merchandise good quality, aggressive price tag and the greatest support for Factory making Black Stainless Steel Sheet - 304 stainless steel coil – Cepheus, The product will supply to all over the world, such as: Brazil , Japan , Croatia , We have exported our products all over the world, especially the USA and European countries. Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures to ensure high quality.If you are interested in any of our products, please don't hesitate to contact us. We will try our best to meet your needs.

Material Grade

Material ASTM A240 Standard 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
ASTM A480 Standard 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630  
JIS G4305 Standard SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A

Product Specification

Finish Thickness Characteristics Applications
No. 1 3.0mm~50.0mm Finished by hot-rolling, annealing and pickling, characterized by white pickled surface Chemical industry equipment, Industrial tanks
No. 2B 0.3mm~6.0mm Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface General Application Medical Instruments, Tableware
No. BA (Bright Annealed) 0.5mm~2.0mm Bright heat treatment after cold rolling Kitchen utensil, kitchen ware, architectural purpose
No. 4 0.4mm~3.0mm Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes Milk & Food processing facilities, Hospital Equipment, Bath-tub
No. 8 0.5mm~2.0mm A mirror-like reflective surface by polishing with finer abrasives over 800 mesh Reflector, Mirror, Interior-Exterior decoration forbuilding
HL(Hair Line) 0.4mm~3.0mm Finished by continuous linear polishing Architectural purposes, escalators, kitchen ware vehicles

Chemical Composition

Grade

C

Si

Mn

P

S

Cr

Ni

Mo

Ti

N

Cu

Nb

201

≤0.15

≤1.0

5.50-7.50

≤0.05

≤0.03

16.00-18.00

3.50-5.50

-

-

0.05-0.25

-

-

202

≤0.15

≤1.0

7.50-10.00

≤0.05

≤0.03

17.00-19.00

4.00-6.00

-

-

0.05-0.25

-

-

301

≤0.15

≤1.0

≤2.0

≤0.045

≤0.03

16.00-18.00

6.00-8.00

-

-

≤0.1

-

-

302

≤0.15

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

≤0.1

-

-

303

≤0.15

≤1.0

≤2.0

≤0.2

≥0.15

17.00-19.00

8.00-10.00

≤0.6

-

≤0.1

-

-

304

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

-

-

-

304L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304H

0.04-0.1

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304N

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

0.10-0.16

-

-

304J1

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

6.00-9.00

-

-

-

1.00-3.00

-

305

≤0.12

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

10.50-13.00

-

-

-

-

-

309S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

22.00-24.00

12.00-15.00

-

-

-

-

-

310S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

24.00-26.00

19.00-22.00

-

-

-

-

-

316

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

12.00-15.00

2.00-3.00

-

-

-

-

316H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316N

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

0.10-0.16

-

-

316Ti

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-19.00

11.00-14.00

2.00-3.00

≥5C

-

-

-

317L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

11.00-15.00

3.00-4.00

-

-

-

-

321

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

5C-0.7

-

-

-

347

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

10C-1.10

347H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

8C-1.10

2205

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

21.00-24.00

4.50-6.50

2.50-3.50

-

0.08-0.20

-

-

2507

≤0.03

≤0.8

≤1.2

≤0.035

≤0.02

24.00-26.00

6.00-8.00

3.00-5.00

-

0.24-0.32

-

-

904L

≤0.02

≤1.0

≤2.0

≤0.045

≤0.03

19.00-23.00

23.00-28.00

4.00-5.00

-

-

1.00-2.00

-

C276

≤0.02

≤0.05

≤1.0

-

-

14.00-16.50

Other

-

-

-

-

-

Monel400

≤0.3

≤0.5

≤2.0

-

≤0.024

-

≥63

-

-

-

28-34

-

409L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

17.00-19.00

-

-

-

-

-

-

410

≤0.15

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

410L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

420J1

0.16-0.25

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

420J2

0.26-0.40

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

430

≤0.12

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

436L

≤0.025

≤1.0

≤1.0

≤0.035

≤0.03

16.00-19.00

-

-

-

-

-

-

439

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

440A

0.60-0.75

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440B

0.75-0.95

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440C

0.95-1.2

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

441

≤0.03

0.2-0.8

≤0.7

≤0.03

≤0.015

17.50-18.50

-

≤0.5

0.1-0.5

≤0.025

-

0.3+3C-0.9

We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.

 Identification labels are tagged accordingto standard specification or customer’s instructions. 

Special packing is available as per customer’s requirement.

Stainless Steel Coil Package

cepheus stainless steel coil package (1)

cepheus stainless steel coil package (2)

 

Stainless Steel Sheet / Stainless Steel Plate Package

cepheus stainless steel  sheet package (3)

cepheus stainless steel plate 1_副本

 

Stainless Steel Strip Package

cepheus stainless steel  strip package (5)

Shipment Package

Cepheus Stainless Steel Shipment (1)

Cepheus Stainless Steel Shipment (2)

Cepheus Stainless Steel Shipment (3)

Our company is based in Wuxi,  gathering city of industrial stainless steel in China.

We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.

Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers. 

Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,

Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys

 

In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.

wuxi cepheus stainless steel (1)

 

wuxi cepheus stainless steel (5)

wuxi cepheus stainless steel (4)

wuxi cepheus stainless steel (3)

 

wuxi cepheus stainless steel (2)

 

Q1: What is stainless?

A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.

Q2: Does stainless mean no rusting?

A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.

Q3: Do you supply stainless steel sheets?

A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.

Q4: Do you accept cut to length service?

A: Of course, customer’s satisfaction is our top priority.

Q5: If i have a small order, do you accept small order?

A: Not a problem, your concern is our concern, small quantities are accepted.

Q6: How can you guarantee your product quality?

A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.

Q7: Will you pack the products?

A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.

Q8: What do you need to know from customer before accurate quotation?

A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.

Q9: What kind of payment term you accpet?

A: We accept T/T, West union, L/C.

Q10: If this is a small order, will you delivery the goods to our agent?

A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.

Q11: Do you just make flat sheet? I want to make a fabrication for my new project.

A:  No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.

Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
      Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
      patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.

Q15: What is the application about your Products?
A:  1.elevator door/cabin or and escalator’s side-wall.
      2.Wall cladding inside or outside meeting room/ restaurant.
      3.Facade when cladding over something, like columns in the lobby.
      4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
       be provided.

  • The company can think what our think, the urgency of urgency to act in the interests of our position, can be said this is a responsible company, we had a happy cooperation!
    5 Stars By Lena from Argentina - 2015.11.06 10:04
    Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
    5 Stars By Liz from Russia - 2016.04.28 15:45

    Related Products