2205 tôle d'acier inoxydable
Brève description:
2205 Stainless Steel Sheet
2205 Stainless steel sheet can be made by hot rolling and cold rolling, including the thickness of 0.31-3.0 mm sheet and 3.0-8 mm slab.
Hot-rolled 2205 stainless steel is not as good as cold-rolled in mechanical properties, but there are good toughness and ductility. Cold-rolled 2205 stainless steel plate is low in toughness due to the good hardening.
In order to ensure all kinds of 2205 stainless steel yield strength, tensile strength, elongation and hardness and other mechanical properties to meet the requirements, prior to delivery must be stainless steel annealing, solution treatment, aging heat treatment.
2205 stainless steel Material Grade
Matériel | ASTM A240 Norme | 201, 304 304L 304H 309H 309S 310S 310H 316H 316 316L 317L 316Ti 317 321 321H 347 347H 409 410 410S 430 904L |
ASTM A480 Norme | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348h, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
JIS 4304-2005 standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316 / 316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
JIS G4305 standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
2205 stainless steel Product Specification
terminer | Épaisseur | Les caractéristiques | Applications |
n ° 1 | 3.0mm ~ 50.0mm | Fini par laminage à chaud, de recuit et de décapage, caractérisé en ce que la surface décapée blanc | Equipement pour l'industrie chimique, les réservoirs industriels |
No. 2B | 0.3mm ~ 6.0mm | Fini par un traitement thermique, de décapage après laminage à froid, suivie d'une ligne de passage de la peau à être plus lumineux et une surface lisse | Application générale Instruments médicaux, Vaisselle |
No. BA (recuit brillant) | 0.5mm ~ 2.0mm | traitement thermique après laminage à froid brillante | ustensiles de cuisine, ustensiles de cuisine, le but architectural |
Numéro 4 | 0.4mm ~ 3.0mm | Polissage avec des abrasifs n ° 150 à n ° 180 de maille. Les finitions les plus populaires | Le lait et les installations de traitement des aliments, équipement d'hôpital, Baignoire |
No. 8 | 0.5mm ~ 2.0mm | Une surface réfléchissante comme un miroir par polissage avec des abrasifs plus fins, plus de 800 mesh | Réflecteur, Miroir, Décoration d'intérieur-extérieur forbuilding |
HL (ligne des cheveux) | 0.4mm ~ 3.0mm | Fini par polissage linéaire continue | fins architecturales, escaliers mécaniques, véhicules ustensiles de cuisine |
2205 stainless steelStandard Sizes
Taille | Epaisseur: 0,15 mm-3,00 mm (feuilles laminé à froid); 3-8mm (dalle laminé à chaud) |
Largeur: 1000mm, 1219mm, 1250mm, 1500mm, 1800mm, 2000mm | |
Longueur: 2000mm, 2440mm, 2500mm, 3000mm, 3048mm, 5800mm, 6000mm ou exigences des clients |
Composition chimique
Qualité |
C |
Si |
mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Nb |
201 |
≤0.15 |
≤1.0 |
5,50 à 7,50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3,50 à 5,50 |
- |
- |
0,05-0,25 |
- |
- |
202 |
≤0.15 |
≤1.0 |
7,50 à 10,00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4,00 à 6,00 |
- |
- |
0,05-0,25 |
- |
- |
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6,00 à 8,00 |
- |
- |
≤0.1 |
- |
- |
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304H |
0,04-0,1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0,10 à 0,16 |
- |
- |
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6,00 à 9,00 |
- |
- |
- |
1,00 à 3,00 |
- |
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10,50 à 13,00 |
- |
- |
- |
- |
- |
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22,00 à 24,00 |
12.00-15.00 |
- |
- |
- |
- |
- |
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24,00 à 26,00 |
19,00 à 22,00 |
- |
- |
- |
- |
- |
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0,10 à 0,16 |
- |
- |
316ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11,00 à 15,00 |
3.00-4.00 |
- |
- |
- |
- |
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0,7 |
- |
- |
- |
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1,10 |
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21,00 à 24,00 |
4,50 à 6,50 |
2,50 à 3,50 |
- |
0,08 à 0,20 |
- |
- |
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24,00 à 26,00 |
6,00 à 8,00 |
3,00 à 5,00 |
- |
0,24 à 0,32 |
- |
- |
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19,00 à 23,00 |
23,00 à 28,00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14,00 à 16,50 |
Autre |
- |
- |
- |
- |
- |
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50 à 13,50 |
- |
- |
- |
- |
- |
- |
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50 à 13,50 |
- |
- |
- |
- |
- |
- |
420J1 |
0,16 à 0,25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
420J2 |
0,26 à 0,40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
440A |
0,60 à 0,75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440B |
0,75 à 0,95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440C |
0,95 à 1,2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
441 |
≤0.03 |
0,2-0,8 |
≤0.7 |
≤0.03 |
≤0.015 |
17,50 à 18,50 |
- |
≤0.5 |
0,1-0,5 |
≤0.025 |
- |
0,3 + 3C-0,9 |
We supply other 2205 stainless steel materials:
2205 Raccord en acier inoxydable tubeX 2205 sans soudure tuyaux en acier inoxydableX 2205 bandes en acier inoxydableX 2205 en acier inoxydable AngleX 2205 Round BarX 2205X 2205 tôle d'acier inoxydableX 2205 en acier inoxydable bobine
We also have stainles steel plate in different grades:
X Plaque 201 en acier inoxydableX 2205 Plaque en acier inoxydableX 2507 Plaque en acier inoxydableX Plaque en acier inoxydable 304X 309S Plaque en acier inoxydableX 310s tôles d'acier inoxydableX Plaque en acier inoxydable 316LX Plaque en acier inoxydable 317LX Plaque en acier inoxydable 321X Plaque en acier inoxydable 904L
Qualité matérielle
Matériel | ASTM A240 Norme | 201, 304 304L 304H 309H 309S 310S 310H 316H 316 316L 317L 316Ti 317 321 321H 347 347H 409 410 410S 430 904L |
ASTM A480 Norme | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348h, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
JIS 4304-2005 standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
JIS G4305 standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Spécification de produit
terminer | Épaisseur | Les caractéristiques | Applications |
n ° 1 | 3.0mm ~ 50.0mm | Fini par laminage à chaud, de recuit et de décapage, caractérisé en ce que la surface décapée blanc | Equipement pour l'industrie chimique, les réservoirs industriels |
No. 2B | 0.3mm ~ 6.0mm | Fini par un traitement thermique, de décapage après laminage à froid, suivie d'une ligne de passage de la peau à être plus lumineux et une surface lisse | Application générale Instruments médicaux, Vaisselle |
No. BA (recuit brillant) | 0.5mm ~ 2.0mm | traitement thermique après laminage à froid brillante | ustensiles de cuisine, ustensiles de cuisine, le but architectural |
Numéro 4 | 0.4mm ~ 3.0mm | Polissage avec des abrasifs n ° 150 à n ° 180 de maille. Les finitions les plus populaires | Le lait et les installations de traitement des aliments, équipement d'hôpital, Baignoire |
No. 8 | 0.5mm ~ 2.0mm | Une surface réfléchissante comme un miroir par polissage avec des abrasifs plus fins, plus de 800 mesh | Réflecteur, Miroir, Décoration d'intérieur-extérieur forbuilding |
HL (ligne des cheveux) | 0.4mm ~ 3.0mm | Fini par polissage linéaire continue | fins architecturales, escaliers mécaniques, véhicules ustensiles de cuisine |
Composition chimique
Qualité |
C |
Si |
mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Nb |
201 |
≤0.15 |
≤1.0 |
5,50 à 7,50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3,50 à 5,50 |
- |
- |
0,05-0,25 |
- |
- |
202 |
≤0.15 |
≤1.0 |
7,50 à 10,00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4,00 à 6,00 |
- |
- |
0,05-0,25 |
- |
- |
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6,00 à 8,00 |
- |
- |
≤0.1 |
- |
- |
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304H |
0,04-0,1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0,10 à 0,16 |
- |
- |
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6,00 à 9,00 |
- |
- |
- |
1,00 à 3,00 |
- |
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10,50 à 13,00 |
- |
- |
- |
- |
- |
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22,00 à 24,00 |
12.00-15.00 |
- |
- |
- |
- |
- |
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24,00 à 26,00 |
19,00 à 22,00 |
- |
- |
- |
- |
- |
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0,10 à 0,16 |
- |
- |
316ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11,00 à 15,00 |
3.00-4.00 |
- |
- |
- |
- |
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0,7 |
- |
- |
- |
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1,10 |
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21,00 à 24,00 |
4,50 à 6,50 |
2,50 à 3,50 |
- |
0,08 à 0,20 |
- |
- |
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24,00 à 26,00 |
6,00 à 8,00 |
3,00 à 5,00 |
- |
0,24 à 0,32 |
- |
- |
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19,00 à 23,00 |
23,00 à 28,00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14,00 à 16,50 |
Autre |
- |
- |
- |
- |
- |
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50 à 13,50 |
- |
- |
- |
- |
- |
- |
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50 à 13,50 |
- |
- |
- |
- |
- |
- |
420J1 |
0,16 à 0,25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
420J2 |
0,26 à 0,40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
440A |
0,60 à 0,75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440B |
0,75 à 0,95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440C |
0,95 à 1,2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
441 |
≤0.03 |
0,2-0,8 |
≤0.7 |
≤0.03 |
≤0.015 |
17,50 à 18,50 |
- |
≤0.5 |
0,1-0,5 |
≤0.025 |
- |
0,3 + 3C-0,9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
Nous nous sommes spécialisés dans les bobines en acier inoxydable, tôles et plaques, tuyaux en acier inoxydable et des raccords, des tubes en acier inoxydable, ainsi que les produits d'aluminium et de produits en cuivre.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.