Saukewa: LC1D12CC7C
Takaitaccen Bayani:
Schneider Electric TeSys Deca Series Contactor LC1D12CC7C, 3 - iyakacin duniya, 12A, AC - 3, 5.5kW a 400V, 1 Kullum Buɗe + 1 Alamar Rufewa ta Al'ada, 36V 50/60Hz AC nada, dunƙule - nau'in wiring, CS, CHRt
Babban Bayani
Jerin Samfura
Jerin Samfura
Nau'in Samfur
Short Name
Filin Aikace-aikacen Contactor
Aiwatar da kayan da ba-inductive ko ɗiyan inductive lodi, juriya tanderu.
Rukunin Amfani
AC - 1
AC - 3
AC-3 ku
Adadin Sanduna
Ƙimar Wutar Lantarki na Aiki [Ue]
Wutar lantarki: <= 300V DC
Rated Working A halin yanzu [Ie]
12 A (lokacin da zafin aiki <= 60 °C) lokacin da ƙarfin aiki <= 440 V AC, AC - 3 don kewayawar wutar lantarki.
12 A (lokacin da zafin jiki na aiki <= 60 °C) lokacin da ƙarfin aiki <= 440 V AC, AC - 3e don kewayawar wutar lantarki.
Sarrafa Wutar Lantarki [Uc]
Karin Bayani
Ƙarfin Mota (kW)
3 kW lokacin da ƙarfin ƙarfin aiki <= 220/240 V AC, 50/60 Hz (AC-3)
5.5 kW lokacin da ƙarfin aiki <= 380/400 V AC, 50/60 Hz (AC-3)
5.5 kW lokacin da ƙarfin aiki <= 415/440 V AC, 50/60 Hz (AC-3)
7.5 kW lokacin da ƙarfin lantarki mai aiki <= 660/690 V AC, 50/60 Hz (AC-3)
7.5 kW lokacin da ƙarfin aiki <= 500V AC, 50/60 Hz (AC-3e)
3 kW lokacin da ƙarfin ƙarfin aiki <= 220/240 V AC, 50/60 Hz (AC-3e)
5.5 kW lokacin da ƙarfin aiki <= 380/400 V AC, 50/60 Hz (AC-3e)
5.5 kW lokacin da ƙarfin aiki <= 415/440 V AC, 50/60 Hz (AC-3e)
7.5 kW lokacin da ƙarfin ƙarfin aiki <= 660/690 V AC, 50/60 Hz (AC-3e)
Samfura
Nau'in Lambobin da'ira
Murfin Kariya
Al'ada dumama halin yanzu [Ith]
10 A (lokacin da zafin aiki <= 60 °C) don kewaya sigina.
Ƙididdigar ɗan gajeren lokaci - Juriya na yanzu [Icw]
210 A lokacin da zafin jiki na aiki <= 40 °C, mai dorewa don 1 s don da'irar wutar lantarki.
30 A lokacin da zafin aiki <= 40 °C, mai dorewa na mintuna 10 don da'irar wutar lantarki.
61 A lokacin da zafin aiki <= 40 °C, mai dorewa na minti 1 don kewayawar wutar lantarki.
100 A, mai dorewa don 1 s don da'irar sigina.
120 A, mai dorewa don 500 ms don da'irar sigina.
140 A, mai dorewa don 100 ms don da'irar sigina.
Fuses da ake amfani da su tare da Relays
40 A gG lokacin da ƙarfin aiki <= 690 V, tare da Nau'in 1, don kewayawar wutar lantarki.
25 A gG lokacin da ƙarfin aiki <= 690 V, tare da Nau'in 2, don kewayawar wutar lantarki.
Matsakaicin Tashin hankali
Ƙimar Insulation Voltage [Ui]
Da'irar sigina: 690V, daidai da IEC 60947-1.
Nau'in Wutar Lantarki
Degree Pollution
Rated Efulse yana tsayayya da voltage [UIMP]
Matsayin Tsaro da Amincewa
B10d = sau 2000000 don masu tuntuɓar injiniyoyi tare da nauyin injin, daidai da EN/ISO 13849-1.
Rayuwar Injiniya
Rayuwar Lantarki
0.8 Micycles a 25 A, AC - 1, Ue yanayi <= 440 V.
2.2 Kekuna a 9 A, AC - 3, Ue yanayi 660/690 V.
2 Mcycles a 12 A, AC - 3e, Ue yanayi <= 440 V.
2.2 Kekuna a 9 A, AC - 3e, Ue yanayi 660/690 V.
Sarrafa Halayen kewaye
Module Surge Surge
Iyakar Wutar Lantarki
0.8…1.1 Uc (- 40…60 °C): Farawar Coil, 50 Hz.
0.85…1.1 Uc (- 40…60 °C): Farawar Coil, 60 Hz.
Amfanin Wutar Lantarki (VA) (~ 50Hz Farawa)
70 VA a 50 Hz, cos phi 0.75 (a 20 ° C)
Amfanin Wutar Lantarki (VA) (~ 50Hz Rike)
6 VA a 50 Hz, cos phi 0.3 (a 20 ° C)
Rashin Zafi
Lokacin Aiki
4…19 ms don buɗewa
Matsakaicin Mitar Aiki
Ƙarfin Waya
Da'irar wutar lantarki: Ƙarƙashin ƙarfe 2, 1… 4 mm², diamita na lugga na waje Ø: 8 mm, nau'in USB: waya mai sassauƙa ba tare da tasha ba.
Da'irar wutar lantarki: Ƙarƙashin ƙarfe 1, 1… 4 mm², diamita na lugga na waje Ø: 8 mm, nau'in kebul: waya mai sassauƙa tare da tasha.
Da'irar wutar lantarki: Ƙaƙwalwar ɗamara 2, 1…2.5 mm², diamita na lugga na waje Ø: 8 mm, nau'in kebul: waya mai sassauƙa tare da tasha.
Da'irar wutar lantarki: Ƙarƙashin ƙarfe 1, 1… 4 mm², diamita na lugga na waje Ø: 8 mm, nau'in kebul: waya mara ƙarfi ba tare da tasha ba.
Da'irar wutar lantarki: Ƙarƙashin ƙarfe 2, 1… 4 mm², diamita na lugga na waje Ø: 8 mm, nau'in kebul: waya mara ƙarfi ba tare da tasha ba.
Da'irar sarrafawa: Ƙaƙwalwar ɗamara 1, 1… 4 mm², nau'in kebul: waya mai sassauƙa ba tare da tasha ba.
Da'irar sarrafawa: Bolted fastening 2, 1… 4 mm², nau'in kebul: waya mai sassauƙa ba tare da tasha ba.
Da'irar sarrafawa: Ƙarƙashin ƙarfe 1, 1… 4 mm², nau'in kebul: waya mai sassauƙa tare da tasha.
Da'irar sarrafawa: Bolted fastening 2, 1…2.5 mm², nau'in kebul: waya mai sassauƙa tare da tasha.
Da'irar sarrafawa: Ƙarƙashin ƙarfe 1, 1… 4 mm², nau'in kebul: waya mara ƙarfi ba tare da tasha ba.
Da'irar sarrafawa: Ƙaƙwalwar ɗamara 2, 1… 4 mm², nau'in kebul: waya mara ƙarfi ba tare da tasha ba.
Tighting Torque
Da'irar wutar lantarki: 1.7 Nm ta hanyar ƙulla ɗaure tare da gicciye - screwdriver kai No 2.
Da'irar sarrafawa: 1.7 Nm ta hanyar ƙulli mai ɗaure tare da lebur-screwdriver Ø 6.
Da'irar sarrafawa: 1.7 Nm ta hanyar ƙulla ɗaure tare da giciye - screwdriver No 2.
Wutar wutar lantarki: 1.7 Nm ta hanyar haɗin kebul tare da lebur - screwdriver Ø 6, dunƙule: M3.5.
Da'irar wutar lantarki: 1.7 Nm ta hanyar haɗin kebul tare da giciye - shugaban sukudireba No 2, dunƙule: M3.5.
Da'irar sarrafawa: 1.7 Nm ta hanyar ƙulla ɗaure tare da pozidriv sukudireba No 2.
Da'irar wutar lantarki: 1.7 Nm ta hanyar ƙulla ɗaure tare da sukudireba pozidriv No 2.
Nau'in Lambobin Taimako
Nau'in madubi - wanda aka zana tare da Babban Jiha 1 NC, daidai da IEC 60947 - 4 - 1.
Akwai Taimakon Lambobi ga kowane mai tuntuɓar
Mitar kewaya sigina
Mafi ƙarancin Canjawa Yanzu [Imin]
Juriya na Insulation
10 MΩ don kewaya sigina.
Lokaci mara-matsawa
1.5 ms tsakanin NC da NO lambobin sadarwa lokacin da aka ƙarfafa.
Hanyar hawa
Hawan panel
Muhalli
Ka'idoji Conformance
Bayani na IEC 60947-4-1
GB/T 14048.4
Takaddar Samfura
UKCA
CCC
Matsayin Kariyar IP
IP2X don gaban panel, wanda ya dace da da'irar coil, daidai da IEC 60529.
Matakan Kariya
Yanayin yanayi na yanayi
- 40 ... 60 ° C don aiki.
60-70 ° C tare da derating. - 60…80C don ajiya.
Matsayin Aiki
Wuta da Babban Haɓaka - Juriya na zafin jiki
Girgizawa da Resistance Vibration
Juriyar rawar jiki lokacin da aka rufe lambobin sadarwa (4 gn (5…300 Hz)), daidai da IEC 60068 - 2-6.
Juriyar girgiza 11 ms lokacin da lambobin sadarwa ke buɗe (10 gn), daidai da IEC 60068 - 2-27.
Juriyar girgiza 11 ms lokacin da aka rufe lambobin sadarwa (15 gn), daidai da IEC 60068 - 2-27.
Tsayi
Nisa
Zurfin
Cikakken nauyi
Sashin tattara kaya
Adadin Raka'a a cikin Kunshin 1: 1
Kunshin 1 Tsawo: 5.152 cm
Kunshin 1 Nisa: 7.874 cm
Kunshin 1 Tsawon: 9.441 cm
Kunshin 1 Nauyi: 341.0 g
Nau'in Nau'in Kunshin 2: S02
Adadin Raka'a a cikin Kunshin 2: 24
Kunshin 2 Tsawo: 15.0 cm
Kunshin 2 Nisa: 30.0 cm
Kunshin 2 Tsawon: 40.0 cm
Kunshin 2 Nauyi: 8.771 kg
Nau'in Nau'in Kunshin 3: PAL
Adadin Raka'a a Kunshin 3: 384
Kunshin 3 Tsayi: 60.0 cm
Kunshin 3 Nisa: 80.0 cm
Kunshin 3 Tsawon: 75.0 cm
Kunshin 3 Nauyi: 130.994 kg
Garanti na Kwangila
watanni 18
Matsayin Material
| Kayan abu | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 4104 30S |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 316H, 309H, 316H, 309H, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S312S3026 S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S332205, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S2S SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS3131JUS SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430LX, SUS43SUS40 SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1 |
Ƙayyadaddun samfur
| Gama | Kauri | Halaye | Aikace-aikace |
| Na 1 | 3.0mm ~ 50.0mm | An gama da zafi-birgima, annealing da pickling, halin da fari pickled surface | Chemical masana'antu kayan aiki, Masana'antu tankuna |
| Na 2B | 0.3mm ~ 6.0mm | An gama shi da maganin zafi, zazzagewa bayan mirgina sanyi, sannan layin wucewar fata ya kasance mafi haske da santsi | Gabaɗaya Aikace-aikacen Medical Instruments, Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Maganin zafi mai haske bayan mirgina sanyi | Kayan dafa abinci, kayan dafa abinci, manufar gine-gine |
| Na 4 | 0.4mm ~ 3.0mm | Goge tare da lamba 150 zuwa lamba 180 abrasives. Mafi shaharar ƙarewa | Madara & Wuraren sarrafa Abinci, Kayayyakin Asibiti, Baho |
| Na 8 | 0.5mm ~ 2.0mm | Filaye mai kama da madubi ta hanyar gogewa tare da mafi kyawun abrasives sama da raga 800 | Reflector, madubi, ciki- waje ado don gini |
| HL (Layin Gashi) | 0.4mm ~ 3.0mm | An gama ta hanyar ci gaba da goge baki | Manufofin gine-gine, escalators, motocin kayan abinci |
Haɗin Sinadari
| Daraja | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | 0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316 Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317l | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904l | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Sauran | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409l | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410l | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436l | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Mukunsa samfuran bakin karfe tare da takarda anti-tsatsa da zoben karfe don hana lalacewa.
Ana yiwa lakabin tantancewa bisa ga ƙayyadaddun ƙayyadaddun ƙayyadaddun bayanai ko umarnin abokin ciniki.
Ana samun fakiti na musamman gwargwadon buƙatun abokin ciniki.
Kunshin Karfe Bakin Karfe
Bakin Karfe Sheet / Kunshin Bakin Karfe
Kunshin Bakin Karfe Strip
Kunshin jigilar kaya
Kamfaninmu yana dogara ne a Wuxi, yana tara birnin masana'antu bakin karfe a kasar Sin.
Mun ƙware a cikin bakin coils, zanen gado da faranti, bakin karfe da bututu da kayan aiki, bututun bakin karfe, da samfuran aluminum da samfuran tagulla.
Abokan cinikinmu daga Turai, Amurka, Gabas ta Tsakiya, Afirka da kudu maso gabashin Asiya sun yaba da samfuranmu. Za mu bayar da m kayayyakin da m sabis ga abokan ciniki.
Bakin Karfe Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 3, 7 420, 430, 430F, 440, 440c,
Alloy Grade: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Karfe, Mild Karfe, Aluminium, Alloy Karfe, Carbon Karfe, Musamman Nickel Alloys
A cikin nau'i na: Zagaye Bars, Bars Square, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wayoyi, Wayoyin Waya, Sheets, Faranti, Bututu maras kyau, ERW Pipes, Flanges, Fittings, da dai sauransu.
Q1: Menene bakin ciki?
A: Bakin ƙarfe yana nufin babu alama a saman saman ƙarfe, ko nau'in ƙarfe wanda iska ko ruwa bai lalace ba kuma wanda baya canza launi, mara tabo, mai jurewa tabo, tsatsa, lalatar tasirin sinadarai.
Q2: Shin bakin karfe yana nufin babu tsatsa?
A: A'a, bakin karfe yana nufin ba sauƙin samun tabo ko tsatsa ba, yana da ikon iya tsayayya da tabo, tsatsa da lalata.
Q3: Kuna samar da zanen gado na bakin karfe?
A: Ee, muna samar da nau'ikan nau'ikan nau'ikan zanen karfe, tare da kauri daga 0.3-3.0mm. kuma a lokuta daban-daban.
Q4: Kuna yarda da yanke zuwa tsayin sabis?
A: Tabbas, gamsuwar abokin ciniki shine babban fifikonmu.
Q5: Idan ina da ƙaramin oda, kuna karɓar ƙaramin oda?
A: Ba matsala ba, damuwar ku ita ce damuwarmu, ana karɓar ƙananan yawa.
Q6: Ta yaya za ku iya tabbatar da ingancin samfurin ku?
A: Na farko, tun daga farko, mun riga mun aiwatar da ruhi zuwa tunaninsu, wato inganci ita ce rayuwa, kwararrun ma’aikatanmu da ma’aikatanmu za su bi kowane mataki har kayan sun cika da kyau kuma a fitar da su.
Q7: Za ku shirya samfuran?
A: Masu sana'a suna yin ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun ƙwararrun, muna da nau'ikan tattarawa daban-daban na zaɓi ga abokan ciniki, ɗayan tattalin arziki ko mafi kyau.
Q8: Menene kuke buƙatar sani daga abokin ciniki kafin ingantaccen zance?
A: Don ingantacciyar magana, muna buƙatar sanin daraja, kauri, girman, ƙarewar saman, launi da adadin odar ku, da kuma maƙasudin kayan. Za a buƙaci ƙarin bayanin samfur na musamman, kamar zane, shimfidawa da tsari. Sa'an nan kuma za mu ba da magana mai gasa tare da bayanin da ke sama.
Q9: Wane irin wa'adin biyan kuɗi kuka karɓa?
A: Mun yarda da T/T, West union, L/C.
Q10: Idan wannan ƙaramin oda ne, za ku isar da kayan ga wakilinmu?
A: Ee, an haife mu ne don magance matsalolin abokan cinikinmu, za mu sami kayan cikin aminci zuwa ɗakin ajiyar wakilin ku kuma mu aiko muku da hotuna.
Q11: Shin kuna yin lebur ne kawai? Ina so in yi ƙage don sabon aikina.
A: A'a, mu yafi samar da bakin karfe lebur takardar surface jiyya, a lokaci guda, mu tsirar musamman karfe ƙãre samfurin kamar yadda ta abokin ciniki ta zane da kuma shirin, mu m zai kula da sauran.
Q12: Katuna nawa kuka riga kuka fitar dashi?
A: Ana fitar dashi zuwa kasashe sama da 50 musamman daga Amurka, Rasha, UK, Kuwait, Masar, Iran,
Turkiyya, Jordan, da dai sauransu.
Q13: Ta yaya zan iya samun wasu samfurori?
A: Ƙananan samfurori a cikin kantin sayar da kayayyaki kuma suna iya samar da samfurori kyauta. Catalgue yana samuwa, mafi yawa
alamu muna da shirye samfurori a hannun jari. Samfurori na musamman zasu ɗauki kimanin kwanaki 5-7.
Q14: Menene isarwa?
A: Misalin odar lokacin isarwa shine kwanaki 5-7. Umarnin kwantena kusan kwanaki 15-20 ne.
Q15: Menene aikace-aikacen game da samfuran ku?
A: 1.elevator kofa/ cabin ko da bangon gefen escalator.
2.Rufe bango ciki ko waje dakin taro/gidan cin abinci.
3.Facade lokacin da aka rufe kan wani abu, kamar ginshiƙai a cikin harabar gidan.
4.Rufi a babban kanti. 5.Ado zana a wasu wuraren nishadi.
Q16: Har yaushe Zaku iya Ba da garantin Wannan samfur/Kammala?
A: Garanti mai launi fiye da shekaru 10. Takaddun ingancin kayan asali na iya
a bayar.
