-
No. 4 Finish is characterized by short, parallel polishing lines, which extend uniformly along the length of the coil. It is obtained by mechanically polishing a No. 3 finish with gradually finer abrasives. Depending on the requirements of the application, the final finish can be anywhere between...E heluhelu hou aku »
-
No. 3 Finish is characterized by short, relatively coarse, parallel polishing lines, which extend uniformly along the length of the coil. It is obtained by either mechanically polishing with gradually finer abrasives or by passing the coil through special rolls, which press a pattern into the sur...E heluhelu hou aku »
-
No. 2D Finish is a uniform, dull silver gray finish that is applied to thinner coils whose thickness has been reduced by cold rolling. After rolling, the coil is heat treated to produce a uniform microstructure (annealing) and to meet mechanical property requirements. Pickling or descaling is nec...E heluhelu hou aku »
-
No. 2B Finish is a bright cold rolled finish commonly produced in the same manner as No. 2D, except that the final light cold rolling pass is done using polished rolls. This produces a more reflective finish that resembles a cloudy mirror. Finish reflectivity can vary from manufacturer-to-manufac...E heluhelu hou aku »
-
Cepheus Stainless stocks the following products in 300 series stainless steel: 300 Series Stainless: 301 Stainless Steel 302 Stainless Steet 303 Stainless Steel 304 Stainless Steel 304L Stainless Steel 304/304L Prodec Stainless 304H Stainless Steel 316/316L Stainless Ste...E heluhelu hou aku »
-
No. 1 Finish is produced by rolling stainless steel that has been heated prior to rolling (hot-rolling). This is followed by a heat treatment that produces a uniform microstructure (annealing) and ensures that the stainless steel will meet mechanical property requirements. After these proc...E heluhelu hou aku »
-
Stainless steel sheet 304 No.4 shipped 48tons of stainless steel sheets 304 No.4 were ready and shipped to Aqaba, Jordan. Shipping list: shipping photo: E heluhelu hou aku »
-
Size Type Schedule/PN/# MATERIAL GRADE CLASS STANDARD Quantity FOB shanghai 5″ 45° LONG RADIUS ELBOW SCH40 CS A234 GR. WPB CLASS 2 ANSI B16.9 10.00 pcs $6.69 6″ 45° LONG RADIUS ELBOW SCH40 CS A234 GR. WPB CLASS 2 ANSI B16.9 8.00 pcs $5.97 2.1/2″ 45° LO...E heluhelu hou aku »
-
Sanicro 28 round bar Alloy 28 (Wst 1.4563) Technical Data Sheet Chemical Composition Limits Weight% Ni Fe Cr Mo Cu Ti C Mn S Si Al Alloy 28 30-32 22 min 26-28 3-4 0.60-1.40 - 0.02 max 2 max 0.03 max 0.70 max - Alloy 28 (UNS N08028, W. Nr. 1.4563) is a nickel-iron-chromium alloy with add...E heluhelu hou aku »
-
Stainless Steel Sheets 430 and 304 E heluhelu hou aku »
-
Stainless Steel Sheets Shipment: Product: 304 stainless steel sheets 310S stainless steel plate 2 containers to Aqaba port, Jordan. E heluhelu hou aku »
-
304 No.4 Surface Stainless Steel Sheet 20190416 E heluhelu hou aku »