Fitting an asye pur
Deskripsyon kout:
Konpozisyon chimik
| Klas | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16:00-18:00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16:00-18:00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-minwi | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 12:00-26:00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | 10:00-14:00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | 10:00-14:00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | 10:00-14:00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-19:00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-minwi | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 12:00-26:00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Lòt | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-19:00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Klas Materyèl
| Materyèl | Nòm ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410 4104S |
| Nòm ASTM A480 | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| Nòm JIS 4304-2005 | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| Estanda JIS G4305 | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Espesifikasyon pwodwi
| Fini | Epesè | Karakteristik | Aplikasyon yo |
| Nimewo 1 | 3.0mm ~ 50.0mm | Fini pa woule cho, rekwi ak marinated, karakterize pa sifas blan marinated | Ekipman endistri chimik, Tank endistriyèl |
| Nimewo 2B | 0.3mm ~ 6.0mm | Fini pa tretman chalè, marinated apre woule frèt, ki te swiv pa liy pasaj po pou yon sifas ki pi klere ak lis | Aplikasyon Jeneral Enstriman Medikal, Vesèl |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Tretman chalè klere apre woule frèt | Istansil kwizin, istansil kwizin, objektif achitekti |
| Nimewo 4 | 0.4mm ~ 3.0mm | Polisaj ak abrazif may nimewo 150 rive nimewo 180. Fini ki pi popilè yo | Enstalasyon pou trete lèt ak manje, Ekipman lopital, Beny |
| Nimewo 8 | 0.5mm ~ 2.0mm | Yon sifas refleksyon ki sanble ak yon glas grasa polisaj ak abrazif ki pi rafine ki gen plis pase 800 may. | Reflektè, Miwa, Dekorasyon enteryè-eksteryè pou konstriksyon |
| HL (Liy Cheve) | 0.4mm ~ 3.0mm | Fini pa polisaj lineyè kontinyèl | Objektif achitekti, eskalatè, machin istansil kwizin |
Konpozisyon Chimik
| Klas | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16:00-18:00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16:00-18:00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-minwi | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 12:00-26:00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | 10:00-14:00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | 10:00-14:00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | 10:00-14:00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16:00-19:00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-minwi | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 12:00-26:00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Lòt | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-19:00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16:00-18:00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
NouVlope pwodwi asye pur yo ak papye anti-wouy ak bag asye pou anpeche domaj.
Etikèt idantifikasyon yo make dapre spesifikasyon estanda a oswa enstriksyon kliyan an.
Anbalaj espesyal disponib selon egzijans kliyan an.
Pake bobin asye pur
Fèy asye pur / Pake plak asye pur
Pake bann asye pur
Pake chajman
Konpayi nou an baze nan Wuxi, yon vil ki rasanble asye pur endistriyèl nan peyi Lachin.
Nou espesyalize nan bobin, fèy ak plak asye pur, tiyo ak ekipman asye pur, tib asye pur, epi tou pwodwi aliminyòm ak pwodwi kwiv.
Kliyan nou yo soti an Ewòp, Amerik, Mwayen Oryan, Afrik ak Azi Sidès fè lwanj pou pwodwi nou yo. Nou pral ofri pwodwi konpetitif ak sèvis konplè bay kliyan nou yo.
Klas asye pur: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Klas alyaj: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titàn, Tantal, Asye gwo vitès, Asye dou, Aliminyòm, Asye alyaj, Asye kabòn, Alyaj nikèl espesyal
Nan fòm: Ba wonn, Ba kare, Ba egzagonal, Ba plat, Ang, Chanèl, Pwofil, Fil, Baton fil, Fèy, Plak, Tiyo san pwoblèm, Tiyo ERW, Bride, Ekipman, elatriye.
K1: Ki sa ki asye pur?
A: Enacier vle di pa gen okenn mak sou sifas asye a, oubyen yon kalite asye ki pa domaje pa lè oswa dlo epi ki pa chanje koulè, san tach, rezistan a tach, rouye, efè koroziv pwodui chimik yo.
K2: Èske asye pur vle di pa gen rouye?
A: Non, asye pur vle di li pa fasil pou tache oswa wouye, li gen kapasite espesyal pou reziste tach, wouye ak korozyon.
Q3: Èske ou bay fèy asye pur?
A: Wi, nou founi diferan kalite fèy asye pur, ak epesè ki varye ant 0.3-3.0mm. epi nan diferan fini.
Q4: Èske ou aksepte sèvis koupe nan longè?
A: Natirèlman, satisfaksyon kliyan an se pi gwo priyorite nou.
Q5: Si mwen gen yon ti lòd, èske ou aksepte ti lòd?
A: Pa gen pwoblèm, enkyetid ou se enkyetid nou, nou aksepte ti kantite.
Q6: Ki jan ou ka garanti bon jan kalite pwodwi ou a?
A: Premyèman, depi nan kòmansman an, nou deja aplike yon lespri nan lespri yo, ki se kalite se lavi, travayè pwofesyonèl nou yo ak anplwaye yo pral swiv chak etap jiskaske machandiz yo byen chaje epi anbake.
Q7: Èske w ap anbale pwodwi yo?
A: Moun pwofesyonèl yo fè anbalaj pwofesyonèl, nou gen diferan kalite anbalaj opsyonèl pou kliyan yo, youn ekonomik oswa youn pi bon.
Q8: Kisa ou bezwen konnen nan men kliyan anvan ou bay yon sitasyon egzat?
A: Pou yon pri egzak, nou bezwen konnen klas, epesè, gwosè, fini sifas, koulè ak kantite lòd ou a, epi tou destinasyon machandiz yo. N ap bezwen plis enfòmasyon sou pwodwi a, tankou desen, layout ak plan. Apre sa, n ap ofri yon pri konpetitif ak enfòmasyon ki anwo yo.
Q9: Ki kalite tèm peman ou aksepte?
A: Nou aksepte T/T, West union, L/C.
Q10: Si se yon ti lòd, èske w ap livre machandiz yo bay ajan nou an?
A: Wi, nou fèt pou rezoud pwoblèm kliyan nou yo, nou pral fè machandiz yo san danje nan depo ajan ou a epi voye foto yo ba ou.
K11: Èske ou sèlman fè dra plat? Mwen vle fè yon fabrikasyon pou nouvo pwojè mwen an.
A: Non, nou sitou pwodui tretman sifas fèy plat an asye pur, an menm tan, nou fabrike pwodwi fini metal Customized dapre desen ak plan kliyan an, teknisyen nou an ap pran swen rès la.
Q12: Konbyen peyi ou deja ekspòte?
A: Ekspòte nan plis pase 50 peyi sitou soti nan Amerik, Larisi, Wayòm Ini, Kowet, peyi Lejip, Iran,
Tiki, lòt bò larivyè Jouden, elatriye.
Q13: Kijan m ka jwenn kèk echantiyon?
A: Ti echantiyon nan magazen an epi nou ka bay echantiyon yo gratis. Katalòg disponib, pifò
Nou gen echantiyon pare an stock pou modèl yo. Echantiyon pèsonalize yo ap pran anviwon 5-7 jou.
Q14: Ki jan livrezon an ye?
A: Tan livrezon pou kòmand echantiyon an se 5-7 jou. Kòmand kontenè yo pran anviwon 15-20 jou.
Q15: Ki aplikasyon pwodwi ou yo?
A: 1. pòt asansè/kabin oubyen miray bò eskalatè a.
2. Revètman miray andedan oswa deyò sal reyinyon / restoran.
3. Fasad lè w ap kouvri yon bagay, tankou kolòn nan lobi a.
4. Plafon nan makèt la. 5. Desen dekoratif nan kèk kote amizman.
Q16: Konbyen tan ou ka garanti pou pwodui/fini sa a?
A: Garanti koulè pou plis pase 10 ane. Sètifika kalite materyèl orijinal yo kapab
dwe bay.
