Schneider LC1D12CC7C
Nkọwa dị mkpirikpi:
Schneider Electric TeSys Deca Series Contactor LC1D12CC7C, 3 – pole, 12A, AC – 3, 5.5kW at 400V, 1 Normally Open + 1 Normally mechie kọntaktị inyeaka, 36V 50/60Hz AC eriri igwe, Screw – ụdị wiring, CS, ICH, CHRT, CHRT
Ozi Isi
Usoro ngwaahịa
Usoro ngwaahịa
Ụdị ngwaahịa
Aha mkpirisi ngwaahịa
Ngwa ubi nke Contactor
Tinyere na ibu na-abụghị nke na-emepụta ihe ma ọ bụ nke na-emepụta ihe, ọkụ ọkụ na-eguzogide.
Ụdị ojiji
AC - 1
AC - 3
AC - 3e
Ọnụọgụ okporo osisi
Voltage Na-arụ Ọrụ Egotara [Ue]
Ike sekit: <= 300 V DC
Enyere aha na-arụ ọrụ ugbu a [ie]
12 A (mgbe okpomọkụ na-arụ ọrụ <= 60 °C) mgbe voltaji arụ ọrụ <= 440 V AC, AC - 3 maka sekit ike.
12 A (mgbe okpomọkụ na-arụ ọrụ <= 60 °C) mgbe voltaji arụ ọrụ <= 440 V AC, AC - 3e maka sekit ike.
Voltaji sekit njikwa [Uc]
Ozi mgbakwunye
Ike moto (kW)
3 kW mgbe voltaji arụ ọrụ <= 220/240 V AC, 50/60 Hz (AC - 3)
5.5 kW mgbe voltaji arụ ọrụ <= 380/400 V AC, 50/60 Hz (AC - 3)
5.5 kW mgbe voltaji arụ ọrụ <= 415/440 V AC, 50/60 Hz (AC - 3)
7.5 kW mgbe voltaji arụ ọrụ <= 660/690 V AC, 50/60 Hz (AC - 3)
7.5 kW mgbe voltaji arụ ọrụ <= 500 V AC, 50/60 Hz (AC - 3e)
3 kW mgbe voltaji arụ ọrụ <= 220/240 V AC, 50/60 Hz (AC - 3e)
5.5 kW mgbe voltaji arụ ọrụ <= 380/400 V AC, 50/60 Hz (AC - 3e)
5.5 kW mgbe voltaji arụ ọrụ <= 415/440 V AC, 50/60 Hz (AC - 3e)
7.5 kW mgbe voltaji arụ ọrụ <= 660/690 V AC, 50/60 Hz (AC - 3e)
Nlereanya
Ụdị kọntaktị sekit
Ihe mkpuchi mkpuchi
Okpomọkụ Ochie Ugbu a [Ith]
10 A (mgbe okpomọkụ na-arụ ọrụ <= 60 °C) maka sekit mgbama.
Enyere aha dị mkpụmkpụ - oge na-eguzogide ugbu a [Icw]
210 A mgbe okpomọkụ na-arụ ọrụ <= 40 °C, na-adigide maka 1 s maka sekit ike.
30 A mgbe okpomọkụ na-arụ ọrụ <= 40 °C, na-adigide maka nkeji 10 maka sekit ike.
61 A mgbe okpomọkụ na-arụ ọrụ <= 40 °C, na-adigide maka nkeji 1 maka sekit ike.
100 A, na-adigide maka 1 s maka sekit mgbama.
120 A, na-adigide maka 500 ms maka sekit mgbama.
140 A, na-adigide maka 100 ms maka sekit mgbama.
Fuses eji na njikọ Relays
40 A gG mgbe voltaji arụ ọrụ <= 690 V, yana njikọ ya na ụdị 1, maka sekit ike.
25 A gG mgbe voltaji arụ ọrụ <= 690 V, yana njikọ ya na ụdị 2, maka sekit ike.
Nkezi Mmebi
Voltage mkpuchi akwadoro [Ui]
Mgbama okirikiri: 690V, dị ka IEC 60947-1.
Otu oke voltaji
ogo mmetọ
Ogo nke mkpali na-eguzogide voltaji [Uimp]
Ọkwa nchekwa na ntụkwasị obi
B10d = 20000000 ugboro maka ndị kọntaktị nwere ibu ọrụ, dị ka EN / ISO 13849-1.
Ndụ Mechanical
Ndụ Eletriki
0.8 Mcycles na 25 A, AC – 1, Ue ọnọdụ <= 440 V.
2.2 Mcycles na 9 A, AC – 3, Ue ọnọdụ 660/690 V.
2 Mcycles na 12 A, AC – 3e, Ue ọnọdụ <= 440 V.
2.2 Mcycles na 9 A, AC – 3e, Ue ọnọdụ 660/690 V.
Njirimara sekit njikwa
Module Surge Surge
Oke voltaji njikwa
0.8…1.1 Uc (- 40…60 Celsius C): Mmalite eriri igwe, 50 Hz.
0.85…1.1 Uc (- 40…60 Celsius): Mmalite eriri igwe, 60 Hz.
Oriri ike (VA) (~ 50Hz Mmalite)
70 VA na 50 Hz, cos phi 0.75 (na 20 Celsius)
Oriri ike (VA) (~ 50Hz Jide)
6 VA na 50 Hz, cos phi 0.3 (na 20 Celsius)
Mgbasa ọkụ
Oge ime ihe
4…19 ms maka imeghe
Ugboro arụ ọrụ kacha
Ike waya
Ike sekit: Bolted fastening 2, 1… 4 mm², njedebe lug elu dayameta Ø: 8 mm, ụdị eriri: waya na-agbanwe agbanwe na-enweghị ọnụ.
Ike sekit: Bolted fastening 1, 1… 4 mm², njedebe lug elu dayameta Ø: 8 mm, ụdị eriri: waya na-agbanwe agbanwe na ọnụ.
Ike sekit: Bolted fastening 2, 1…2.5 mm², ọnụ lug elu dayameta Ø: 8 mm, USB ụdị: mgbanwe waya na ọnụ.
Ike sekit: Bolted fastening 1, 1… 4 mm², njedebe lug mpụta dayameta Ø: 8 mm, ụdị eriri: waya siri ike na-enweghị ọnụ.
sekit ike: Bolted fastening 2, 1… 4 mm², ọdụ ụgbọ elu mpụga dayameta Ø: 8 mm, ụdị eriri: waya siri ike na-enweghị ọnụ.
Control sekit: Bolted fastening 1, 1… 4 mm², USB ụdị: mgbanwe waya na-enweghị ọnụ.
Control sekit: Bolted fastening 2, 1… 4 mm², USB ụdị: mgbanwe waya na-enweghị ọnụ.
Control sekit: Bolted fastening 1, 1…4 mm², USB ụdị: mgbanwe waya na ọnụ.
Control sekit: Bolted fastening 2, 1…2.5 mm², USB ụdị: mgbanwe waya na ọnụ.
Control sekit: Bolted fastening 1, 1…4 mm², USB ụdị: isiike waya na-enweghị ọnụ.
Control sekit: Bolted fastening 2, 1…4 mm², USB ụdị: isiike waya na-enweghị ọnụ.
Torque na-agbatị
Ike sekit: 1.7 Nm site bolted fastening na cross – isi screwdriver No 2.
Control sekit: 1.7 Nm site bolted fastening na flat – bladed screwdriver Ø 6.
Control sekit: 1.7 Nm site bolted fastening na cross - isi screwdriver No 2.
Ike sekit: 1.7 Nm site na eriri eriri na eriri - bladed screwdriver Ø 6, kposara: M3.5.
Ike sekit: 1.7 Nm site na eriri eriri na cross - isi screwdriver No 2, kposara: M3.5.
Control sekit: 1.7 Nm site bolted fastening na pozidriv screwdriver No 2.
Ike sekit: 1.7 Nm site bolted fastening na pozidriv screwdriver No 2.
Ụdị kọntaktị inyeaka
Ụdị enyo - nke e sere ya na steeti kọntaktị isi 1 NC, dịka IEC 60947-4-1 siri dị.
Kọntaktị inyeaka dị kwa onye kọntaktị
Ugboro sekit mgbama
Ngbanwe kacha nta ugbu a [Imin]
Nguzogide mkpuchi
10 MΩ maka sekit mgbama.
Oge anaghị agbakọ
1.5 ms n'etiti NC na enweghị kọntaktị mgbe ike.
Ụzọ mgbanye
Ịkwanye panel
gburugburu
Nkwekọrịta ụkpụrụ
IEC 60947-4-1
GB/T 14048.4
Asambodo ngwaahịa
UKCA
CCC
Ogo nchekwa IP
IP2X maka ihu ihu, ọdabara na eriri igwe, dị ka IEC 60529 si dị.
Usoro nchekwa
Okpomọkụ ikuku
- 40…60C maka ọrụ.
60 ... 70 Celsius C na derating. - 60…80C maka nchekwa.
Altitude na-arụ ọrụ
Ọkụ na Ọdịiche Dị Elu - Nguzogide okpomọkụ
Mgbochi na ịma jijiji
Nguzogide ịma jijiji mgbe emechiri kọntaktị (4 gn (5… 300 Hz)), dịka IEC 60068-2-6 siri dị.
Ujo eguzogide 11 ms mgbe kọntaktị na-emeghe (10 gn), dị ka IEC 60068 - 2-27.
Ujo eguzogide 11 ms mgbe kọntaktị na-emechi (15 gn), dị ka IEC 60068 - 2-27.
Ogologo
Obosara
Omimi
Nha ịbụ
Ngalaba nkwakọ ngwaahịa
Ọnụọgụ nke nkeji na ngwugwu 1: 1
Ngwugwu 1 Ogologo: 5.152 cm
Ngwugwu 1 obosara: 7.874 cm
Ngwugwu 1 Ogologo: 9.441 cm
Ngwugwu 1 Arọ: 341.0 g
Nkeji Ụdị ngwugwu 2: S02
Ọnụọgụ nke nkeji na ngwugwu 2: 24
Ngwugwu 2 Elu: 15.0 cm
Ngwugwu 2 obosara: 30.0 cm
Ngwugwu 2 Ogologo: 40.0 cm
Ngwugwu 2 Arọ: 8.771 n'arọ
Nkeji Ụdị ngwugwu 3: PAL
Ọnụọgụ nke nkeji na ngwugwu 3: 384
Ngwugwu 3 Ogologo: 60.0 cm
Ngwugwu 3 obosara: 80.0 cm
Ngwugwu 3 Ogologo: 75.0 cm
Ngwugwu 3 Arọ: 130.994 n'arọ
Akwụkwọ ikike nkwekọrịta
Ọnwa iri na asatọ
Ọkwa ihe
| Ihe onwunwe | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 4104 410S |
| ASTM A480 ọkọlọtọ | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 316H, 309H, 316H, 310H 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S312S, S3312S S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003. S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 ọkọlọtọ | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 ọkọlọtọ | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS3301SL, SUS309S2 SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS3131JUS, SUS3131JUS SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430LX, SUS43 SUS40, SUS43 SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Nkọwapụta ngwaahịa
| Mechaa | Ọkpụrụkpụ | Njirimara | Ngwa |
| Nke 1 | 3.0mm ~ 50.0mm | Emechara ya site na mkpọgharị ọkụ, mgbakasị ahụ na pickling, nke ejiri elu na-acha ọcha mara | Ngwá ọrụ ụlọ ọrụ kemịkalụ, tankị ụlọ ọrụ |
| Nọmba 2B | 0.3mm ~ 6.0mm | Emechara ya site na ọgwụgwọ okpomọkụ, pickling mgbe oyi na-atụgharị, na-esote ahịrị ngafe akpụkpọ ahụ ka ọ na-egbuke egbuke ma dịkwa larịị | Ngwa ngwa ahụike n'ozuzu, tebụl |
| Mba. BA (Bright Annealed) | 0.5mm ~ 2.0mm | ọgwụgwọ okpomọkụ na-egbuke egbuke mgbe oyi na-atụgharị | Ngwa kichin, ngwa kichin, ebumnuche ụkpụrụ ụlọ |
| Nke 4 | 0.4mm ~ 3.0mm | Ntugharị na nọmba 150 ruo No.180 mesh abrasives. Emecha kacha ewu ewu | Ebe a na-edozi mmiri ara ehi & nri, akụrụngwa ụlọ ọgwụ, ebe ịsa ahụ |
| Nke 8 | 0.5mm ~ 2.0mm | Elu na-egosipụta enyo dị ka enyo site na iji abrasives ndị mara mma na-ekpocha ihe karịrị ntupu 800 | Reflector, mirror, Ime-Mpụga mma maka ewu |
| HL (Ahịhịa ntutu) | 0.4mm ~ 3.0mm | Emechara ya site na polishing linear na-aga n'ihu | Ihe owuwu ihe owuwu, escalators, ụgbọ ala ngwa nri kichin |
Ngwakọta kemịkalụ
| Ọkwa | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316 Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Ndị ọzọ | - | - | - | - | - |
| Ego 400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+ 3C-0.9 |
Anyịkechie ngwaahịa igwe anaghị agba nchara na akwụkwọ mgbochi nchara na mgbanaka ígwè iji gbochie mmebi.
A na-akpado akara njirimara dị ka ọkọlọtọ ọkọlọtọ ma ọ bụ ntuziaka ndị ahịa si dị.
Nkwakọ ngwaahịa pụrụ iche dị ka onye ahịa chọrọ.
ngwugwu igwe anaghị agba nchara
Mpekere igwe anaghị agba nchara / igwe anaghị agba nchara
ngwugwu eriri igwe anaghị agba nchara
Ngwungwu Mbupu
Ụlọ ọrụ anyị dabeere na Wuxi, na-achịkọta obodo nke ụlọ ọrụ igwe anaghị agba nchara na China.
Anyị pụrụ iche na igwe anaghị agba nchara, mpempe akwụkwọ na efere, ọkpọkọ igwe anaghị agba nchara na akwa akwa, tubes igwe anaghị agba nchara, yana ngwaahịa aluminom na ngwaahịa ọla kọpa.
Ndị ahịa anyị si Europe, America, Middle East, Africa na Southeast Asia toro ngwaahịa anyị nke ukwuu. Anyị ga-enye ngwaahịa asọmpi na ọrụ zuru oke nye ndị ahịa.
Ọkwa igwe anaghị agba nchara: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 3, 6 420, 430, 430F, 440, 440c,
Alloy ọkwa:Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Dị nwayọọ Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
N'ụdị: Ogwe gburugburu, Ogwe Square, Ogwe Hexagonal, Ogwe Flat, Angle, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings, etc.
Q1: Gịnị bụ igwe anaghị agba nchara?
A: Igwe anaghị agba nchara pụtara enweghị akara n'elu nchara, ma ọ bụ ụdị nchara nke ikuku ma ọ bụ mmiri na-emebighị na nke na-adịghị agbanwe agba, enweghị ntụpọ, na-eguzogide ọgwụ, nchara, mmetụta na-emebi emebi nke kemịkalụ.
Q2: Igwe anaghị agba nchara ọ pụtara enweghị nchara?
A: Mba, igwe anaghị agba nchara pụtara adịghị mfe ịnweta ntụpọ ma ọ bụ nchara, ọ nwere ikike pụrụ iche iji guzogide nsị, nchara na corrosion.
Q3: Ị na-enye mpempe akwụkwọ anaghị agba nchara?
A: Ee, anyị na-enye ụdị dị iche iche nke igwe anaghị agba nchara, na ọkpụrụkpụ ranges si 0.3-3.0mm. na n'ụdị dị iche iche.
Q4: Ị na-anabata ọrụ ịkpụ n'ogologo?
A: N'ezie, afọ ojuju ndị ahịa bụ ihe kacha anyị mkpa.
Q5: Ọ bụrụ na m nwere obere usoro, ị na-anabata obere usoro?
A: Ọ bụghị nsogbu, nchegbu gị bụ nchegbu anyị, a na-anabata obere obere.
Q6: Kedu ka ị ga-esi kwe nkwa ịdị mma ngwaahịa gị?
A: Nke mbụ, site na mmalite, anyị etinyelarị mmụọ n'uche ha, nke ahụ bụ àgwà bụ ndụ, ndị ọrụ ọkachamara anyị na ndị ọrụ ga-agbaso nzọụkwụ ọ bụla ruo mgbe ngwongwo ndị ahụ na-akwakọba nke ọma ma bupu ya.
Q7: Ị ga-akwakọba ngwaahịa?
A: Ndị ọkachamara na-eme nkwakọ ngwaahịa ọkachamara, anyị nwere ụdị nkwakọ ngwaahịa dị iche iche maka ndị ahịa, otu akụ na ụba ma ọ bụ ka mma.
Q8: Kedu ihe ị chọrọ ịma site n'aka ndị ahịa tupu nkwupụta ziri ezi?
A: Maka nkọwa ziri ezi, anyị kwesịrị ịma ọkwa, ọkpụrụkpụ, nha, imecha elu, agba na ọnụ ọgụgụ nke ihe ị chọrọ, yana ebe ị na-aga. A ga-achọkwu ozi ngwaahịa ahaziri ahazi, dị ka eserese, nhazi na atụmatụ. Mgbe ahụ, anyị ga-enye nhota asọmpi na ozi dị n'elu.
Q9: Kedu ụdị ụgwọ ịkwụ ụgwọ ị na-anabata?
A: Anyị na-anabata T/T, West union, L/C.
Q10: Ọ bụrụ na nke a bụ obere iwu, ị ga-ebugara ndị ọrụ anyị ngwongwo ndị ahụ?
A: Ee, a mụrụ anyị iji dozie nsogbu nke ndị ahịa anyị, anyị ga-enweta ngwongwo ahụ n'enweghị nsogbu na ụlọ nkwakọba ihe nke onye ọrụ gị ma ziga gị foto.
Q11: Ị na-eme mpempe akwụkwọ dị larịị? Achọrọ m ịmebe echiche maka ọrụ ọhụrụ m.
A: Ee e, anyị tumadi na-emepụta igwe anaghị agba nchara ewepụghị mpempe akwụkwọ n'elu ọgwụgwọ, n'otu oge ahụ, anyị rụpụta ahaziri metal okokụre ngwaahịa dị ka kwa ahịa ịbịaru na atụmatụ, anyị technician ga-elekọta ndị ọzọ.
Q12: Ugboro ole ka i bupuburu?
A: Ebupụ ya karịa mba 50 tumadi site na America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, wdg.
Q13: Kedu ka m ga-esi nweta ụfọdụ nlele?
A: Obere ihe nlele na-echekwa ma nwee ike ịnye ihe nlele n'efu. Catalgue dị, ọtụtụ
ụkpụrụ anyị nwere njikere samples na ngwaahịa. Ihe nlele ahaziri ahazi ga-ewe ihe dịka 5-7days.
Q14: Gịnị bụ nnyefe?
A: Oge nnyefe nke ihe nlele bụ ụbọchị 5-7. Ngwunye akpa bụ ihe dịka ụbọchị 15-20.
Q15: Gịnị bụ ngwa gbasara ngwaahịa gị?
A: 1. elevator ọnụ ụzọ / ụlọ ma ọ bụ na escalator's n'akụkụ mgbidi.
2.Mgbidi mkpuchi n'ime ma ọ bụ n'èzí nzukọ ụlọ / ụlọ oriri na ọṅụṅụ.
3.Facade mgbe cladding n'elu ihe, dị ka ogidi na n'ọnụ ụlọ.
4.Ciling na nnukwu ụlọ ahịa. 5.Decorative adọta na ụfọdụ ntụrụndụ ebe.
Q16: Ogologo oge ole ka ị nwere ike ikwe nkwa maka ngwaahịa a / mechaa?
A: Agba nkwa maka ihe karịrị afọ 10. Asambodo ogo ihe izizi nwere ike
ka enyere.
