Schneider LC1D12CC7C
Whakaahuatanga Poto:
Schneider Electric TeSys Deca Series Contactor LC1D12CC7C, 3 – pou, 12A, AC – 3, 5.5kW i 400V, 1 Tikanga Tuwhera + 1 Tikanga Katia te whakapiri awhina, 36V 50/60Hz AC coil, Screw – momo waea, CCC, CCC, Tiwhikete.
Nga korero matua
Raupapa Hua
Raupapa Hua
Momo Hua
Hua Ingoa Poto
Taupānga Āpure o Contactor
Ka whakamahia ki nga kawenga kore – inductive, paku inductive ranei, oumu parenga.
Ngā Kāwai Whakamahi
AC – 1
AC – 3
AC – 3e
Te maha o nga Pou
Ngaohiko Mahi Whakatau [Ue]
Iahiko hiko: <= 300 V DC
I Whakatauhia te Naianei Mahi [Arā]
12 A (ina te pāmahana whakahaere <= 60 °C) i te ngaohiko whakahaere <= 440 V AC, AC – 3 mo te hiko hiko.
12 A (ina te pāmahana whakahaere <= 60 °C) i te ngaohiko whakahaere <= 440 V AC, AC – 3e mo te hiko hiko.
Mana Iahiko Ngaohiko [Uc]
Nga korero taapiri
Hiko Motini (kW)
3 kW ina te ngaohiko whakahaere <= 220/240 V AC, 50/60 Hz (AC – 3)
5.5 kW ina te ngaohiko whakahaere <= 380/400 V AC, 50/60 Hz (AC – 3)
5.5 kW ina te ngaohiko whakahaere <= 415/440 V AC, 50/60 Hz (AC – 3)
7.5 kW ina te ngaohiko whakahaere <= 660/690 V AC, 50/60 Hz (AC – 3)
7.5 kW ina te ngaohiko whakahaere <= 500 V AC, 50/60 Hz (AC – 3e)
3 kW ina te ngaohiko whakahaere <= 220/240 V AC, 50/60 Hz (AC – 3e)
5.5 kW ina te ngaohiko whakahaere <= 380/400 V AC, 50/60 Hz (AC – 3e)
5.5 kW ina te ngaohiko whakahaere <= 415/440 V AC, 50/60 Hz (AC – 3e)
7.5 kW ina te ngaohiko whakahaere <= 660/690 V AC, 50/60 Hz (AC – 3e)
Tauira
Momo Hoapapa Porohita
Uwhi Tiaki
Te Nau Whakawera Tikanga [Ith]
10 A (ina te pāmahana whakahaere <= 60 °C) mo te ara iahiko tohu.
I Whakatauhia Poto – Wā Tutu Ana Naianei [Icw]
210 A ka te pāmahana whakahaere <= 40 °C, tauwhiro mo te 1 s mo te iahiko hiko.
30 A ka te pāmahana whakahaere <= 40 °C, tauwhiro mo te 10 meneti mo te iahiko hiko.
61 A ka te pāmahana whakahaere <= 40 °C, tauwhiro mo te 1 meneti mo te iahiko hiko.
100 A, tauwhiro mo te 1 s mo te iahiko tohu.
120 A, tauwhiro mo te 500 ms mo te iahiko tohu.
140 A, tauwhiro mo te 100 ms mo te iahiko tohu.
Ka Whakamahia i te Hononga ki nga Relay
40 A gG ina te ngaohiko whakahaere <= 690 V, i te taha o te Momo 1, mo te hiko hiko.
25 A gG ina te ngaohiko whakahaere <= 690 V, i te taha o te Momo 2, mo te hiko hiko.
Tauwaenga Wawaenga
Ngaohiko Whakataua [Ui]
Iahiko tohu: 690 V, kia rite ki te IEC 60947 – 1.
Ngaohiko Kāwai
Tohu Parahanga
Te Whakataunga Whakatairanga Tuhi Ngaohiko [Uimp]
Taumata Haumaru me te Whakapono
B10d = 20000000 nga wa mo nga kaiwhakataki me te kawenga miihini, kia rite ki te EN/ISO 13849 – 1.
Te Ora Miihini
Te Ora Hiko
0.8 Paihikara i te 25 A, AC – 1, Ue tikanga <= 440 V.
2.2 Paihikara i 9 A, AC – 3, Ue tikanga 660/690 V.
2 Paihikara i te 12 A, AC – 3e, Ue tikanga <= 440 V.
2.2 Paihikara i te 9 A, AC – 3e, Ue tikanga 660/690 V.
Nga ahuatanga o te ara iahiko
Kōwae Whakatairanga Ngaru
Tetenga Ngaohiko Mana
0.8…1.1 Uc (- 40…60 °C): Tīmata porowhita, 50 Hz.
0.85…1.1 Uc (- 40…60 °C): Tīmata porowhita, 60 Hz.
Whakamahi Hiko (VA) (~50Hz Tīmatatanga)
70 VA i te 50 Hz, cos phi 0.75 (i te 20 °C)
Whakamahi Hiko (VA) (~50Hz Pupuri)
6 VA i te 50 Hz, cos phi 0.3 (i te 20 °C)
Te werawera
Wā Mahi
4…19 ms mo te whakatuwheratanga
Auautanga Mahi Morahi
Te Waea Waea
Hikohiko hiko: Te whakamau raka 2, 1…4 mm², te awhi tauranga o waho te diameter Ø: 8 mm, te momo taura: te waea ngawari me te kore kapeka.
Ara iahiko hiko: Te whakamau raka 1, 1…4 mm², te toronga tauranga o waho Ø: 8 mm, te momo taura: waea ngawari me te tauranga.
Ara iahiko hiko: Te whakamau raka 2, 1…2.5 mm², te awhi tauranga o waho Ø: 8 mm, te momo taura: waea ngawari me te tauranga.
Iahiko hiko: Te here raka 1, 1…4 mm², te toronga tauranga o waho Ø: 8 mm, te momo taura: te waea maataki me te kore kapeka.
Iahiko hiko: Te here 2, 1…4 mm², te rewa o waho te whanui Ø: 8 mm, te momo taura: te waea maataki me te kore kapeka.
Te ara iahiko: Te here here 1, 1…4 mm², momo taura: waea ngawari kaore he tauranga.
Te ara iahiko: Te whakamau raka 2, 1…4 mm², momo taura: waea ngawari me te kore tauranga.
Arahiko mana: Tiaki hiri 1, 1…4 mm², momo taura: waea ngawari me te tauranga.
Arahiko mana: Whakamau 2, 1…2.5 mm², momo taura: waea ngawari me te tauranga.
Te ara iahiko: Te whakamau here 1, 1…4 mm², te momo taura: te waea maataki me te kore tauranga.
Te ara iahiko: Te whakamau here 2, 1…4 mm², te momo taura: te waea maataki me te kore he tauranga.
Torque Whakapiki
Iahiko hiko: 1.7 Nm na roto i te whakamau raka me te whiti - mahunga huriwiri No 2.
Arahiko mana: 1.7 Nm na roto i te whakamau raka me te kaitahuri papatahi Ø 6.
Arahiko mana: 1.7 Nm na roto i te whakamau raka me te whiti - mahunga huriwiri No 2.
Iahiko hiko: 1.7 Nm i roto i te hononga taura ki te papatahi – mata huriwiri Ø 6, tīwiri: M3.5.
Iahiko hiko: 1.7 Nm i roto i te hononga taura me te whiti - upoko huriwiri No 2, wiri: M3.5.
Te ara iahiko: 1.7 Nm na roto i te whakamau raka me te pozidriv screwdriver No 2.
Hikohiko hiko: 1.7 Nm na roto i te whakamau raka me te pozidriv screwdriver No 2.
Momo Hoapā Awhina
Momo Mirror – he whakaahua me te State Contact State 1 NC, i runga i te IEC 60947 – 4 – 1.
Hoapā Awhina e waatea ana mo ia Kaitaki
Auautanga Iahiko Tohu
Naianei Whakawhiti Iti [Imin]
Ātete Wehenga
10 MΩ mo te iahiko tohu.
Kore – inaki Time
1.5 ms i waenga i te NC me te KORE hoapā ina whakakaha ana.
Tikanga Whakapiki
Paepae whakapuru
Taiao
Whakaritenga Paerewa
IEC 60947 – 4 – 1
GB/T 14048.4
Tiwhikete Hua
UKCA
CCC
Whakatauranga Tiaki IP
IP2X mo te papa o mua, e pa ana ki te porowhita porowhita, kia rite ki te IEC 60529.
Nga Mahi Tiaki
Te Mahana Hau Ambient
- 40…60 °C mo te mahi.
60…70 °C me te whakaheke. - 60…80 °C mo te rokiroki.
Te teitei Mahi
Te Ahi me te Kore Teitei – Te Atete ki te pāmahana
Te Huri me te Wiri
Te ātete wiri ina katia nga hoapaki (4 gn (5…300 Hz)), kia rite ki te IEC 60068 – 2 – 6.
Te parenga ru 11 ms ka tuwhera nga hoapaki (10 gn), kia rite ki te IEC 60068 – 2 – 27.
Te parenga ru 11 ms ina katia nga hoapaki (15 gn), kia rite ki te IEC 60068 – 2 – 27.
Teitei
Whānui
Hohonutanga
Taumaha Kupenga
Waenga Whakapaipai
Te maha o nga Waeine kei roto i te kete 1: 1
Mōkī 1 Teitei: 5.152 cm
Mōkī 1 Whānui: 7.874 cm
Mōkī 1 Te roa: 9.441 cm
Mōkī 1 Taumaha: 341.0 g
Momo Waeine o te Mokete 2: S02
Te maha o nga Waehe kei roto i te kete 2: 24
Mōkī 2 Teitei: 15.0 cm
Mōkī 2 Whānui: 30.0 cm
Mōkī 2 Te roa: 40.0 cm
Mōkī 2 Taumaha: 8.771 kg
Momo Waeine o te Mokete 3: PAL
Te maha o nga Waeine kei roto i te kete 3: 384
Mōkī 3 Teitei: 60.0 cm
Mōkī 3 Whānui: 80.0 cm
Mōkī 3 Te roa: 75.0 cm
Mōkī 3 Taumaha: 130.994 kg
Waranti kirimana
18 marama
Koeke Rauemi
| Rauemi | ASTM A240 Paerewa | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410 9S |
| ASTM A480 Paerewa | 302. 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S3102, S3102, S3102 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32204, S32204 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Paerewa | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Paerewa | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS301S, SUS309S, SUS301S, SUS SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUSL836J2, SUS317J1, SUS317J1 SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS4364, SUS4364 SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Whakatakotoranga Hua
| Whakaoti | Te matotoru | Nga ahuatanga | Nga tono |
| Nama 1 | 3.0mm~50.0mm | Kua oti i te wera-roke, te annealing me te tiki, e tohuhia ana e te mata î ma | Nga taputapu ahumahi matū, nga taika Ahumahi |
| Nama 2B | 0.3mm~6.0mm | Ka oti i te maimoatanga wera, te tiki i muri i te hurihanga matao, ka whai i te raina paahi kiri kia marama ake, kia maeneene te mata | Whakamahinga Whanui Nga Taonga Hauora, Te Ripanga |
| Nama BA (Kanaana Ane) | 0.5mm~2.0mm | Te maimoatanga wera kanapa i muri i te hurihuri makariri | He taputapu kihini, he taputapu kihini, he kaupapa hangahanga |
| Nama 4 | 0.4mm~3.0mm | Te whakakoi me te No. 150 ki te No.180 mesh abrasives. Ko nga otinga tino rongonui | Te miraka me te mahi kai, Nga Taputapu o te Hohipera, Tapu Patu |
| Nama 8 | 0.5mm~2.0mm | He mata whakaata rite-whakaata ma te whakakorikori me nga abrasive pai ake i te 800 mata | Te whakaata, te whakaata, te whakapaipai o roto-waho mo te hanga |
| HL(Raina Huruhuru) | 0.4mm~3.0mm | Kua oti i te whakakoi raina tonu | Nga kaupapa hoahoanga, nga kaitarai, nga waka taonga kihini |
Hanganga matū
| Kōeke | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Ētahi atu | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Tatoutakai nga hua kowiri tira ki te pepa anti-waikura me nga mowhiti maitai kia kore ai e pakaru.
Ko nga tapanga tohu ka tohua kia rite ki nga tohu paerewa me nga tohutohu a nga kaihoko.
Kei te waatea nga kohinga motuhake mo te hiahia a te kaihoko.
Kowiri tira Kowiri Mokete
Pepa Kowiri tira / Paareti Kowiri tira
Mōkī Tāhei Kowiri tira
Mōkī Tukunga
Ko ta matou kamupene kei Wuxi, e kohikohi ana i te taone o te ahumahi kowiri tira i Haina.
He mea motuhake matou ki nga kowiri tira, nga pepa me te pereti, te paipa kowiri tira me nga taputapu, nga ngongo kowiri tira, me nga hua konumohe me nga hua parahi.
Ko o maatau hua kua tino whakanuihia e o taatau kiritaki mai i Uropi, Amerika, te Middle East, Awherika me te Tonga o Ahia. Ka whakaekea e matou nga hua whakataetae me te ratonga matawhānui ki nga kaihoko.
Kowiri tira Kowiri tira: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 4, 4, 4 430, 430F, 440, 440c,
Kōeke Alloy :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Nickel Alloys Motuhake
I roto i te ahua o : Pae Porowhita, Pae Tapawha, Pae Hexagonal, Pae Papatahi, Koki, Hongere, Profile, Waea, Waea Waea, Rau, Pereti, Paipa Kore, ERW Pipe, Flanges, Fittings, etc.
Q1: He aha te kowiri?
A: Ko te tikanga o te kowiri karekau he tohu i runga i te mata rino, he momo rino ranei e kore e pakaru i te hau, i te wai ranei, kaore e rereke te tae, kore kohakore, he atete ki te poke, te waikura, te kino o nga matū.
Q2: Ko te tikanga ko te kore he waikura?
A: Kao, he kowiri te tikanga ehara i te mea ngawari ki te poke, ki te waikura ranei, he kaha ki te aukati i te whakapouri, te waikura me te waikura.
Q3: Kei te tuku koe i nga pepa kowiri tira?
A: Ae, ka tukuna e matou nga momo momo pepa kowiri tira, me te matotoru o te 0.3-3.0mm. me nga otinga rereke.
Q4: Ka whakaae koe ki te tapahi ki te ratonga roa?
A: Ko te tikanga, ko te pai o te kaihoko ko ta matou kaupapa matua.
Q5: Mena he iti taku ota, ka whakaae koe ki te ota iti?
A: Kaore he raruraru, ko to awangawanga ko to maatau awangawanga, ka whakaaetia nga waahanga iti.
Q6: Me pehea e taea ai e koe te whakamana i to kounga hua?
A: Tuatahi, mai i te timatanga, kua whakatinanahia e matou he wairua ki o ratou hinengaro, ara ko te kounga te oranga, ka whai a matou kaimahi ngaio me nga kaimahi i ia hikoinga kia pai te kii o nga taonga ka tukuna ki waho.
Q7: Ka kohia e koe nga hua?
A: Ko nga tangata ngaio e mahi ana i nga mahi whakakakahu ngaio, he rereke nga momo tarapēke ki nga kaihoko, ohaoha, pai ake ranei.
Q8: He aha e hiahia ana koe ki te mohio mai i te kaihoko i mua i te whakahua tika?
A: Mo te korero tika, me mohio tatou ki te karaehe, te matotoru, te rahi, te mutunga o te mata, te tae me te nui o to ota, me te waahi hoki o nga taonga. Ka nui ake nga korero mo nga hua kua whakaritea, penei i te tuhi, te whakatakotoranga me te mahere. Na ka whakaekea e matou he whakataetae whakataetae me nga korero o runga ake nei.
Q9: He aha te ahua o te wa utu ka whakaaetia e koe?
A: Ka whakaaetia e matou te T / T, te Uniana o te Hauauru, L / C.
Q10: Mena he ota iti tenei, ka tukuna e koe nga taonga ki to maatau kaihoko?
A: Ae, i whanau mai matou ki te whakaoti rapanga o o taatau kaihoko, ka whiwhi maatau i nga taonga ki te whare putunga o to kaihoko ka tukuna atu nga pikitia ki a koe.
Q11: Ka hanga noa koe i te pepa papatahi? E hiahia ana ahau ki te hanga tito mo taku kaupapa hou.
A: Kare, ko te nuinga o taatau te whakaputa i te maimoatanga mata papatahi kowiri tira, i te wa ano, ka hangaia e matou he hua whakarewa kua oti te whakarite kia rite ki te tuhi a te kaihoko me te mahere, ma to maatau tohunga e tiaki te toenga.
Q12: E hia nga whenua i kaweake e koe?
A: Kaweake ki neke atu i te 50 whenua te nuinga i Amerika, Russia, UK, Kuwait, Ihipa, Iran,
Turkey, Jordan, etc.
Q13: Me pehea e taea ai e au etahi tauira?
A: Nga tauira iti kei roto i te toa ka taea te whakarato i nga tauira mo te kore utu. Kei te waatea a Catalgue, te nuinga
tauira kei a matou nga tauira kua rite i roto i nga taonga. Ko nga tauira kua whakaritea mo te 5-7days.
Q14: He aha te tuku?
A: Ko te wa tuku o te ota tauira ko 5- 7 ra. Ko nga ota ipu he 15-20 nga ra.
Q15: He aha te tono mo o Hua?
A: 1.Elevator tatau/cabin ranei me te escalator taha-taiepa.
2. Te whakakikorua i te pakitara o roto, o waho ranei o te rūma hui/ wharekai.
3. Facade i te wa e whakakikoruatia ana tetahi mea, penei i nga pou o te tomokanga.
4. He tuanui i te hokomaha. 5. Te tuhi whakapaipai i etahi waahi whakangahau.
Q16: Kia pehea te roa ka taea e koe te Whakaae mo tenei Hua / Mutu?
A: Taurangi tae mo te neke atu i te 10 tau. Ka taea e te tiwhikete kounga rauemi taketake
kia whakaratohia.
