Materials Information

  • Post time: 09-29-2020

    Aluminium Plate 5083 5086 Alloy: 1050, 1060, 1100, 3003, 5052 5083 6061 5005 6063 6082 7075 etc. Temper: H12. H14. H16. H18. H112. H22. H24. H26. H32. H34. H36. H38. O etc. Thickness: 0.2mm — 400mm Width: Under 2800mm Length: Under 10000mm Packing: Export standard, covering with brown paper...Read more »

  • Post time: 09-29-2020

    Beryllium Copper Alloys (UNS.C17000,C17200,C17300,C17500,C17510,CuCo1Ni1Be), High Conductivity Copper Alloys (C15000,C18000,C18150,C18200), Aluminum Bronze Alloys(UNS.C61000, C61400, C62300, C62400, C63000/C63020, C63600, C95400), Silicon Bronze Alloys / Copper Nickel Silicon Alloys(C64700,C70250...Read more »

  • Post time: 09-29-2020

    CuBe2 – UNS. C17200 Beryllium Copper Alloys   CuBe2Pb – UNS. C17300 Leaded Beryllium Copper Alloys   CuCo2Be – UNS. C17500 Cobalt Beryllium Copper Rods   CuNi2Be – UNS.C17510 Nickel Beryllium Copper Alloys   CuCo1Ni1Be – CW103C Cobalt Nickel Coppe...Read more »

  • Post time: 09-29-2020

    Phosphor Bronze: Sheets & Strips * Please contact Harada Metal Industry for non-standard and out of range requirements for chemical compositions, mechanical properties and thicknesses of the Standard. Chemical Components Alloy Code Chemical Composition (%) Sn P Fe Pb Zn Cu+Sn+P C5050 1...Read more »

  • Post time: 09-29-2020

    Copper-Nickel Alloys: CuNi44 49 AlloyCuNi44 offers high electrical resistivity and very low temperature coefficient of resistance (TCR). Due to its low TCR, it finds use in wire-wound precision resistors that can operate up to 400°C (750°F). This alloy is also capable of developing a high and c...Read more »

  • Post time: 09-29-2020

    Nickel-Copper Alloys: Wire / Strip / Bar JLC 400is a nickel-copper, solid-solution alloy that offers good strength and toughness over a wide temperature range, including sub-zero temperatures. It provides excellent corrosion resistance and is also resistant to stress corrosion cracking and pitt...Read more »

  • Post time: 09-29-2020

    Nickel-Manganese Alloys: Wire / Strip / Ribbon Ni 211Nickel 211 is similar to Nickel 200 with manganese addition to improve resistance against sulfur at high temperatures. This allows for the use of this alloy in applications where sulfur is present in heating flames, such as in proximity to gl...Read more »

  • Post time: 09-29-2020

    Nickel Alloys  Applications Nickel 200 and 201 alloys are used as leads for electrical & electronic components & as lead-in-wire components for lamps. They are used in making wire mesh & filters for chemical & petrochemical industry. They are also used in Ni-Cd batteries, for weld...Read more »

  • Post time: 09-29-2020

    Nickel Alloys: Standard Nickel Grades Ni 200Nickel 200 is the most widely used standard grades of commercially available pure wrought Nickel alongwith and Nickel 201. These alloys offer good thermal conductivity, mechanical properties, resistance against many corrosive environments, in particul...Read more »

  • Post time: 09-29-2020

    Bronzes are typically very ductile alloys. By way of comparison, most bronzes are considerably less brittle than cast iron. Typically bronze only oxidizes superficially; once a copper oxide (eventually becoming copper carbonate) layer is formed, the underlying metal is protected from further corr...Read more »

  • Post time: 09-24-2020

    316 L is a chromium-nickel molybdenum austenitic stainless steel developed to provide improved corrosion resistance to Alloy 304/304L in moderately corrosive environments. It is often utilized in process streams containing chlorides or halides. The addition of molybdenum improves general corrosio...Read more »

  • Post time: 09-22-2020

    310 Stainless Steel Bar UNS S31000 (Grade 310) 310 stainless steel bar, also known as UNS S31000 and Grade 310, contains the following primary elements: .25% maximum carbon, 2% maximum manganese, 1.5% maximum silicon, 24% to 26% chromium, 19% to 22% nickel, traces of sulfur and phosphorus, with t...Read more »