Original Factory Stainless Steel Black Surface Round Bar - 321 Stainless steel sheet – Cepheus

Short Description:


Product Detail

Technical Specification

Product Package & Shipment

Company Introduction

Question & Answers

Product Tags

Related Video

Feedback (2)

Our well-equipped facilities and great excellent command throughout all stages of generation enables us to guarantee total customer fulfillment for 430 Stainless Steel Strip , Cold Rolled Stainless Steel Strip , Seamless Stainless Steel Pipe Fittings , Are you still looking for a quality product that is in accordance with your good company image while expanding your product range? Try our quality products. Your choice will prove to be intelligent!
Original Factory Stainless Steel Black Surface Round Bar - 321 Stainless steel sheet – Cepheus Detail:

Stainless Steel Sheet

Stainless steel sheet can be made by hot rolling and cold rolling, including the thickness of 0.31-3.0 mm sheet and 3.0-8 mm slab.

Hot-rolled stainless steel is not as good as cold-rolled in mechanical properties, but there are good toughness and ductility. Cold-rolled stainless steel plate is low in toughness due to the good hardening.

In order to ensure all kinds of stainless steel yield strength, tensile strength, elongation and hardness and other mechanical properties to meet the requirements, prior to delivery must be stainless steel annealing, solution treatment, aging heat treatment.

Material Grade

Material ASTM A240 Standard 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
ASTM A480 Standard 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 
JIS G4305 Standard SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A

Product Specification

Finish Thickness Characteristics Applications
No. 1 3.0mm~50.0mm Finished by hot-rolling, annealing and pickling, characterized by white pickled surface Chemical industry equipment, Industrial tanks
No. 2B 0.3mm~6.0mm Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface General Application Medical Instruments, Tableware
No. BA (Bright Annealed) 0.5mm~2.0mm Bright heat treatment after cold rolling Kitchen utensil, kitchen ware, architectural purpose
No. 4 0.4mm~3.0mm Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes Milk & Food processing facilities, Hospital Equipment, Bath-tub
No. 8 0.5mm~2.0mm A mirror-like reflective surface by polishing with finer abrasives over 800 mesh Reflector, Mirror, Interior-Exterior decoration forbuilding
HL(Hair Line) 0.4mm~3.0mm Finished by continuous linear polishing Architectural purposes, escalators, kitchen ware vehicles

Standard Sizes

Size Thickness: 0.15mm-3.00mm (Cold Rolled sheets); 3-8mm (Hot rolled slab)
Width:1000mm, 1219mm, 1250mm, 1500mm, 1800mm, 2000mm
Length: 2000mm, 2440mm, 2500mm, 3000mm, 3048mm, 5800mm, 6000mm or as customers’ requirements

Chemical Composition

Grade

C

Si

Mn

P

S

Cr

Ni

Mo

Ti

N

Cu

Nb

201

≤0.15

≤1.0

5.50-7.50

≤0.05

≤0.03

16.00-18.00

3.50-5.50

-

-

0.05-0.25

-

-

202

≤0.15

≤1.0

7.50-10.00

≤0.05

≤0.03

17.00-19.00

4.00-6.00

-

-

0.05-0.25

-

-

301

≤0.15

≤1.0

≤2.0

≤0.045

≤0.03

16.00-18.00

6.00-8.00

-

-

≤0.1

-

-

302

≤0.15

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

≤0.1

-

-

303

≤0.15

≤1.0

≤2.0

≤0.2

≥0.15

17.00-19.00

8.00-10.00

≤0.6

-

≤0.1

-

-

304

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

-

-

-

304L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304H

0.04-0.1

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304N

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

0.10-0.16

-

-

304J1

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

6.00-9.00

-

-

-

1.00-3.00

-

305

≤0.12

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

10.50-13.00

-

-

-

-

-

309S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

22.00-24.00

12.00-15.00

-

-

-

-

-

310S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

24.00-26.00

19.00-22.00

-

-

-

-

-

316

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

12.00-15.00

2.00-3.00

-

-

-

-

316H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316N

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

0.10-0.16

-

-

316Ti

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-19.00

11.00-14.00

2.00-3.00

≥5C

-

-

-

317L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

11.00-15.00

3.00-4.00

-

-

-

-

321

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

5C-0.7

-

-

-

347

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

10C-1.10

347H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

8C-1.10

2205

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

21.00-24.00

4.50-6.50

2.50-3.50

-

0.08-0.20

-

-

2507

≤0.03

≤0.8

≤1.2

≤0.035

≤0.02

24.00-26.00

6.00-8.00

3.00-5.00

-

0.24-0.32

-

-

904L

≤0.02

≤1.0

≤2.0

≤0.045

≤0.03

19.00-23.00

23.00-28.00

4.00-5.00

-

-

1.00-2.00

-

C276

≤0.02

≤0.05

≤1.0

-

-

14.00-16.50

Other

-

-

-

-

-

Monel400

≤0.3

≤0.5

≤2.0

-

≤0.024

-

≥63

-

-

-

28-34

-

409L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

17.00-19.00

-

-

-

-

-

-

410

≤0.15

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

410L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

420J1

0.16-0.25

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

420J2

0.26-0.40

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

430

≤0.12

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

436L

≤0.025

≤1.0

≤1.0

≤0.035

≤0.03

16.00-19.00

-

-

-

-

-

-

439

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

440A

0.60-0.75

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440B

0.75-0.95

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440C

0.95-1.2

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

441

≤0.03

0.2-0.8

≤0.7

≤0.03

≤0.015

17.50-18.50

-

≤0.5

0.1-0.5

≤0.025

-

0.3+3C-0.9


Product detail pictures:

Original Factory Stainless Steel Black Surface Round Bar -
 321 Stainless steel sheet – Cepheus detail pictures


Related Product Guide:
San Onofre Surf Community Starts to Wake Up About Nuclear Waste on Their Beach | Stainless Steel Elbow For Helium
Plumbing Fitting market Sales Volume, Status, Growth, Opportunities and World Market Share of 2019-2024 | Stainless Steel Pipe Fittings

We thinks what customers think, the urgency of urgency to act in the interests of a customer position of principle, allowing for better quality, lower processing costs, prices are more reasonable, won the new and old customers the support and affirmation for Original Factory Stainless Steel Black Surface Round Bar - 321 Stainless steel sheet – Cepheus, The product will supply to all over the world, such as: UAE , Buenos Aires , Wellington , Insisting over the high-quality generation line management and prospects guide provider, we've made our resolution to offer our shoppers using the initially stage purchasing and soon after provider working experience. Preserving the prevailing helpful relations with our prospects, we even now innovate our product lists the many time to meet up with the brand new wants and stick to the latest trend of this business in Ahmedabad. We're ready to facial area the difficulties and make the transform to grasp many of the possibilities in international trade.

Material Grade

Material ASTM A240 Standard 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L
ASTM A480 Standard 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974
JIS 4304-2005 Standard SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630  
JIS G4305 Standard SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A

Product Specification

Finish Thickness Characteristics Applications
No. 1 3.0mm~50.0mm Finished by hot-rolling, annealing and pickling, characterized by white pickled surface Chemical industry equipment, Industrial tanks
No. 2B 0.3mm~6.0mm Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface General Application Medical Instruments, Tableware
No. BA (Bright Annealed) 0.5mm~2.0mm Bright heat treatment after cold rolling Kitchen utensil, kitchen ware, architectural purpose
No. 4 0.4mm~3.0mm Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes Milk & Food processing facilities, Hospital Equipment, Bath-tub
No. 8 0.5mm~2.0mm A mirror-like reflective surface by polishing with finer abrasives over 800 mesh Reflector, Mirror, Interior-Exterior decoration forbuilding
HL(Hair Line) 0.4mm~3.0mm Finished by continuous linear polishing Architectural purposes, escalators, kitchen ware vehicles

Chemical Composition

Grade

C

Si

Mn

P

S

Cr

Ni

Mo

Ti

N

Cu

Nb

201

≤0.15

≤1.0

5.50-7.50

≤0.05

≤0.03

16.00-18.00

3.50-5.50

-

-

0.05-0.25

-

-

202

≤0.15

≤1.0

7.50-10.00

≤0.05

≤0.03

17.00-19.00

4.00-6.00

-

-

0.05-0.25

-

-

301

≤0.15

≤1.0

≤2.0

≤0.045

≤0.03

16.00-18.00

6.00-8.00

-

-

≤0.1

-

-

302

≤0.15

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

≤0.1

-

-

303

≤0.15

≤1.0

≤2.0

≤0.2

≥0.15

17.00-19.00

8.00-10.00

≤0.6

-

≤0.1

-

-

304

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

8.00-10.00

-

-

-

-

-

304L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304H

0.04-0.1

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

-

-

-

304N

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

8.00-10.00

-

-

0.10-0.16

-

-

304J1

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

6.00-9.00

-

-

-

1.00-3.00

-

305

≤0.12

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

10.50-13.00

-

-

-

-

-

309S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

22.00-24.00

12.00-15.00

-

-

-

-

-

310S

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

24.00-26.00

19.00-22.00

-

-

-

-

-

316

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

12.00-15.00

2.00-3.00

-

-

-

-

316H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

-

-

-

316N

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

16.00-18.00

10.00-14.00

2.00-3.00

-

0.10-0.16

-

-

316Ti

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

16.00-19.00

11.00-14.00

2.00-3.00

≥5C

-

-

-

317L

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

18.00-20.00

11.00-15.00

3.00-4.00

-

-

-

-

321

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

5C-0.7

-

-

-

347

≤0.08

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

10C-1.10

347H

≤0.1

≤1.0

≤2.0

≤0.035

≤0.03

17.00-19.00

9.00-12.00

-

-

-

-

8C-1.10

2205

≤0.03

≤1.0

≤2.0

≤0.035

≤0.03

21.00-24.00

4.50-6.50

2.50-3.50

-

0.08-0.20

-

-

2507

≤0.03

≤0.8

≤1.2

≤0.035

≤0.02

24.00-26.00

6.00-8.00

3.00-5.00

-

0.24-0.32

-

-

904L

≤0.02

≤1.0

≤2.0

≤0.045

≤0.03

19.00-23.00

23.00-28.00

4.00-5.00

-

-

1.00-2.00

-

C276

≤0.02

≤0.05

≤1.0

-

-

14.00-16.50

Other

-

-

-

-

-

Monel400

≤0.3

≤0.5

≤2.0

-

≤0.024

-

≥63

-

-

-

28-34

-

409L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

17.00-19.00

-

-

-

-

-

-

410

≤0.15

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

410L

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

11.50-13.50

-

-

-

-

-

-

420J1

0.16-0.25

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

420J2

0.26-0.40

≤1.0

≤1.0

≤0.035

≤0.03

12.00-14.00

-

-

-

-

-

-

430

≤0.12

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

436L

≤0.025

≤1.0

≤1.0

≤0.035

≤0.03

16.00-19.00

-

-

-

-

-

-

439

≤0.03

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

-

-

-

-

-

440A

0.60-0.75

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440B

0.75-0.95

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

440C

0.95-1.2

≤1.0

≤1.0

≤0.035

≤0.03

16.00-18.00

-

≤0.75

-

-

-

-

441

≤0.03

0.2-0.8

≤0.7

≤0.03

≤0.015

17.50-18.50

-

≤0.5

0.1-0.5

≤0.025

-

0.3+3C-0.9

We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.

 Identification labels are tagged accordingto standard specification or customer’s instructions. 

Special packing is available as per customer’s requirement.

Stainless Steel Coil Package

cepheus stainless steel coil package (1)

cepheus stainless steel coil package (2)

 

Stainless Steel Sheet / Stainless Steel Plate Package

cepheus stainless steel  sheet package (3)

cepheus stainless steel plate 1_副本

 

Stainless Steel Strip Package

cepheus stainless steel  strip package (5)

Shipment Package

Cepheus Stainless Steel Shipment (1)

Cepheus Stainless Steel Shipment (2)

Cepheus Stainless Steel Shipment (3)

Our company is based in Wuxi,  gathering city of industrial stainless steel in China.

We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.

Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers. 

Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,

Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys

 

In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.

wuxi cepheus stainless steel (1)

 

wuxi cepheus stainless steel (5)

wuxi cepheus stainless steel (4)

wuxi cepheus stainless steel (3)

 

wuxi cepheus stainless steel (2)

 

Q1: What is stainless?

A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.

Q2: Does stainless mean no rusting?

A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.

Q3: Do you supply stainless steel sheets?

A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.

Q4: Do you accept cut to length service?

A: Of course, customer’s satisfaction is our top priority.

Q5: If i have a small order, do you accept small order?

A: Not a problem, your concern is our concern, small quantities are accepted.

Q6: How can you guarantee your product quality?

A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.

Q7: Will you pack the products?

A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.

Q8: What do you need to know from customer before accurate quotation?

A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.

Q9: What kind of payment term you accpet?

A: We accept T/T, West union, L/C.

Q10: If this is a small order, will you delivery the goods to our agent?

A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.

Q11: Do you just make flat sheet? I want to make a fabrication for my new project.

A:  No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.

Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
      Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
      patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.

Q15: What is the application about your Products?
A:  1.elevator door/cabin or and escalator’s side-wall.
      2.Wall cladding inside or outside meeting room/ restaurant.
      3.Facade when cladding over something, like columns in the lobby.
      4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
       be provided.

  • The factory workers have rich industry knowledge and operational experience, we learned a lot in working with them,we are extremely grateful that we can encount a good company has excellent wokers.
    5 Stars By Natividad from Bogota - 2016.11.12 12:31
    The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
    5 Stars By Olga from Armenia - 2015.11.06 10:04

    Related Products