Schneider LC1D12CC7C
Short Description:
Schneider Electric TeSys Deca Series Contactor LC1D12CC7C, 3 – pole, 12A, AC – 3, 5.5kW at 400V, 1 Normally Open + 1 Normally Closed auxiliary contact, 36V 50/60Hz AC coil, Screw – type wiring, Certifications (IEC, CCC, CCS, RoHS, REACH)
Main Information
Product Series
Product Series
Product Type
Product Short Name
Application Fields of Contactor
Applied to non – inductive or slightly inductive loads, resistance furnaces.
Usage Categories
AC – 1
AC – 3
AC – 3e
Number of Poles
Rated Working Voltage [Ue]
Power circuit: <= 300 V DC
Rated Working Current [Ie]
12 A (when the operating temperature <= 60 °C) when the operating voltage <= 440 V AC, AC – 3 for the power circuit.
12 A (when the operating temperature <= 60 °C) when the operating voltage <= 440 V AC, AC – 3e for the power circuit.
Control Circuit Voltage [Uc]
Supplementary Information
Motor Power (kW)
3 kW when the operating voltage <= 220/240 V AC, 50/60 Hz (AC – 3)
5.5 kW when the operating voltage <= 380/400 V AC, 50/60 Hz (AC – 3)
5.5 kW when the operating voltage <= 415/440 V AC, 50/60 Hz (AC – 3)
7.5 kW when the operating voltage <= 660/690 V AC, 50/60 Hz (AC – 3)
7.5 kW when the operating voltage <= 500 V AC, 50/60 Hz (AC – 3e)
3 kW when the operating voltage <= 220/240 V AC, 50/60 Hz (AC – 3e)
5.5 kW when the operating voltage <= 380/400 V AC, 50/60 Hz (AC – 3e)
5.5 kW when the operating voltage <= 415/440 V AC, 50/60 Hz (AC – 3e)
7.5 kW when the operating voltage <= 660/690 V AC, 50/60 Hz (AC – 3e)
Model
Type of Circuit Contacts
Protective Cover
Conventional Heating Current [Ith]
10 A (when the operating temperature <= 60 °C) for the signal circuit.
Rated Short – time Withstand Current [Icw]
210 A when the operating temperature <= 40 °C, sustainable for 1 s for the power circuit.
30 A when the operating temperature <= 40 °C, sustainable for 10 minutes for the power circuit.
61 A when the operating temperature <= 40 °C, sustainable for 1 minute for the power circuit.
100 A, sustainable for 1 s for the signal circuit.
120 A, sustainable for 500 ms for the signal circuit.
140 A, sustainable for 100 ms for the signal circuit.
Fuses Used in Conjunction with Relays
40 A gG when the operating voltage <= 690 V, in conjunction with Type 1, for the power circuit.
25 A gG when the operating voltage <= 690 V, in conjunction with Type 2, for the power circuit.
Average Impedance
Rated Insulation Voltage [Ui]
Signal circuit: 690 V, in accordance with IEC 60947 – 1.
Overvoltage Category
Pollution Degree
Rated Impulse Withstand Voltage [Uimp]
Safety and Reliability Level
B10d = 20000000 times for contactors with mechanical load, in accordance with EN/ISO 13849 – 1.
Mechanical Life
Electrical Life
0.8 Mcycles at 25 A, AC – 1, Ue conditions <= 440 V.
2.2 Mcycles at 9 A, AC – 3, Ue conditions 660/690 V.
2 Mcycles at 12 A, AC – 3e, Ue conditions <= 440 V.
2.2 Mcycles at 9 A, AC – 3e, Ue conditions 660/690 V.
Control Circuit Characteristics
Surge Suppression Module
Control Voltage Limit
0.8…1.1 Uc (- 40…60 °C): Coil start, 50 Hz.
0.85…1.1 Uc (- 40…60 °C): Coil start, 60 Hz.
Power Consumption (VA) (~50Hz Starting)
70 VA at 50 Hz, cos phi 0.75 (at 20 °C)
Power Consumption (VA) (~50Hz Holding)
6 VA at 50 Hz, cos phi 0.3 (at 20 °C)
Heat Dissipation
Action Time
4…19 ms for opening
Maximum Operating Frequency
Wiring Capacity
Power circuit: Bolted fastening 2, 1…4 mm², terminal lug outer diameter Ø: 8 mm, cable type: flexible wire without terminal.
Power circuit: Bolted fastening 1, 1…4 mm², terminal lug outer diameter Ø: 8 mm, cable type: flexible wire with terminal.
Power circuit: Bolted fastening 2, 1…2.5 mm², terminal lug outer diameter Ø: 8 mm, cable type: flexible wire with terminal.
Power circuit: Bolted fastening 1, 1…4 mm², terminal lug outer diameter Ø: 8 mm, cable type: rigid wire without terminal.
Power circuit: Bolted fastening 2, 1…4 mm², terminal lug outer diameter Ø: 8 mm, cable type: rigid wire without terminal.
Control circuit: Bolted fastening 1, 1…4 mm², cable type: flexible wire without terminal.
Control circuit: Bolted fastening 2, 1…4 mm², cable type: flexible wire without terminal.
Control circuit: Bolted fastening 1, 1…4 mm², cable type: flexible wire with terminal.
Control circuit: Bolted fastening 2, 1…2.5 mm², cable type: flexible wire with terminal.
Control circuit: Bolted fastening 1, 1…4 mm², cable type: rigid wire without terminal.
Control circuit: Bolted fastening 2, 1…4 mm², cable type: rigid wire without terminal.
Tightening Torque
Power circuit: 1.7 N.m through bolted fastening with a cross – head screwdriver No 2.
Control circuit: 1.7 N.m through bolted fastening with a flat – bladed screwdriver Ø 6.
Control circuit: 1.7 N.m through bolted fastening with a cross – head screwdriver No 2.
Power circuit: 1.7 N.m through cable connector with a flat – bladed screwdriver Ø 6, screw: M3.5.
Power circuit: 1.7 N.m through cable connector with a cross – head screwdriver No 2, screw: M3.5.
Control circuit: 1.7 N.m through bolted fastening with a pozidriv screwdriver No 2.
Power circuit: 1.7 N.m through bolted fastening with a pozidriv screwdriver No 2.
Type of Auxiliary Contacts
Type Mirror – imaged with the Main Contact State 1 NC, in accordance with IEC 60947 – 4 – 1.
Available Auxiliary Contacts per Contactor
Signal Circuit Frequency
Minimum Switching Current [Imin]
Insulation Resistance
10 MΩ for the signal circuit.
Non – overlapping Time
1.5 ms between NC and NO contacts when energized.
Mounting Method
Panel mounting
Environment
Standards Conformance
IEC 60947 – 4 – 1
GB/T 14048.4
Product Certification
UKCA
CCC
IP Protection Rating
IP2X for the front panel, applicable to the coil circuit, in accordance with IEC 60529.
Protective Measures
Ambient Air Temperature
- 40…60 °C for operation.
60…70 °C with derating. - 60…80 °C for storage.
Working Altitude
Fire and Abnormal High – temperature Resistance
Shock and Vibration Resistance
Vibration resistance when contacts are closed (4 gn (5…300 Hz)), in accordance with IEC 60068 – 2 – 6.
Shock resistance 11 ms when contacts are open (10 gn), in accordance with IEC 60068 – 2 – 27.
Shock resistance 11 ms when contacts are closed (15 gn), in accordance with IEC 60068 – 2 – 27.
Height
Width
Depth
Net Weight
Packaging Unit
Number of Units in Package 1: 1
Package 1 Height: 5.152 cm
Package 1 Width: 7.874 cm
Package 1 Length: 9.441 cm
Package 1 Weight: 341.0 g
Unit Type of Package 2: S02
Number of Units in Package 2: 24
Package 2 Height: 15.0 cm
Package 2 Width: 30.0 cm
Package 2 Length: 40.0 cm
Package 2 Weight: 8.771 kg
Unit Type of Package 3: PAL
Number of Units in Package 3: 384
Package 3 Height: 60.0 cm
Package 3 Width: 80.0 cm
Package 3 Length: 75.0 cm
Package 3 Weight: 130.994 kg
Contract Warranty
18 months
Material Grade
| Material | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
| ASTM A480 Standard | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615,S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2,SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Product Specification
| Finish | Thickness | Characteristics | Applications |
| No. 1 | 3.0mm~50.0mm | Finished by hot-rolling, annealing and pickling, characterized by white pickled surface | Chemical industry equipment, Industrial tanks |
| No. 2B | 0.3mm~6.0mm | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface | General Application Medical Instruments, Tableware |
| No. BA (Bright Annealed) | 0.5mm~2.0mm | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware, architectural purpose |
| No. 4 | 0.4mm~3.0mm | Polishing with No. 150 to No.180 mesh abrasives. The most popular finishes | Milk & Food processing facilities, Hospital Equipment, Bath-tub |
| No. 8 | 0.5mm~2.0mm | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
| HL(Hair Line) | 0.4mm~3.0mm | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware vehicles |
Chemical Composition
|
Grade |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
Nb |
|
201 |
≤0.15 |
≤1.0 |
5.50-7.50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3.50-5.50 |
- |
- |
0.05-0.25 |
- |
- |
|
202 |
≤0.15 |
≤1.0 |
7.50-10.00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4.00-6.00 |
- |
- |
0.05-0.25 |
- |
- |
|
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6.00-8.00 |
- |
- |
≤0.1 |
- |
- |
|
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
|
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
|
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304H |
0.04-0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
|
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0.10-0.16 |
- |
- |
|
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6.00-9.00 |
- |
- |
- |
1.00-3.00 |
- |
|
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10.50-13.00 |
- |
- |
- |
- |
- |
|
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22.00-24.00 |
12.00-15.00 |
- |
- |
- |
- |
- |
|
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24.00-26.00 |
19.00-22.00 |
- |
- |
- |
- |
- |
|
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
|
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0.10-0.16 |
- |
- |
|
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
|
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11.00-15.00 |
3.00-4.00 |
- |
- |
- |
- |
|
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0.7 |
- |
- |
- |
|
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
|
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
|
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4.50-6.50 |
2.50-3.50 |
- |
0.08-0.20 |
- |
- |
|
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24.00-26.00 |
6.00-8.00 |
3.00-5.00 |
- |
0.24-0.32 |
- |
- |
|
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19.00-23.00 |
23.00-28.00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
|
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14.00-16.50 |
Other |
- |
- |
- |
- |
- |
|
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
|
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
|
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
|
420J1 |
0.16-0.25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
420J2 |
0.26-0.40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
|
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
|
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
|
440A |
0.60-0.75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440B |
0.75-0.95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
440C |
0.95-1.2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
|
441 |
≤0.03 |
0.2-0.8 |
≤0.7 |
≤0.03 |
≤0.015 |
17.50-18.50 |
- |
≤0.5 |
0.1-0.5 |
≤0.025 |
- |
0.3+3C-0.9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
We specialized in stainless coils, sheets and plate, stainless steel pipe and fittings, stainless steel tubes, and also aluminum products and copper products.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.
