Schneider LC1D12CC7C
Sharaxaad Gaaban:
Schneider Electric TeSys Deca Taxanaha Xiriiriyaha LC1D12CC7C, 3 - cirifka, 12A, AC - 3, 5.5kW at 400V, 1 Caadiyan Furan + 1 Xidhiidh Caadi ah oo Xidhan, 36V 50/60Hz AC gariiradda, Iskuxidhka - nooca fiilada, CS, CHRt
Xogta Ugu Muhiimsan
Taxanaha Alaabta
Taxanaha Alaabta
Nooca Alaabta
Alaabta Magaca Gaaban
Goobaha Codsiga ee Xiriiriyaha
Lagu dabaqo culeysyo aan kicin ama wax yar kicin, foornooyinka iska caabinta.
Qaybaha Isticmaalka
AC - 1
AC - 3
AC - 3e
Tirada Tiirarka
Ku-shaqaynta Voltage ee la qiimeeyay [Ue]
Wareegga awoodda: <= 300 V DC
Lagu qiimeeyay Shaqada Hadda [ie]
12 A (marka heerkulka hawlgalka <= 60 °C) marka korantada shaqaynaysa <= 440 V AC, AC - 3 ee wareegga korantada.
12 A (marka heerkulka hawlgalka <= 60 °C) marka korantada shaqaynaysa <= 440 V AC, AC - 3e ee wareegga korantada.
Xakamaynta Korantada Wareegga [Uc]
Macluumaadka Dheeraadka ah
Awoodda Baabuurka (kW)
3 kW marka korantada shaqaynaysa <= 220/240 V AC, 50/60 Hz (AC - 3)
5.5 kW marka korantada shaqaynaysa <= 380/400 V AC, 50/60 Hz (AC - 3)
5.5 kW marka korantada shaqaynaysa <= 415/440 V AC, 50/60 Hz (AC - 3)
7.5 kW marka korantada shaqaynaysa <= 660/690 V AC, 50/60 Hz (AC - 3)
7.5 kW marka korantada shaqaynaysa <= 500 V AC, 50/60 Hz (AC - 3e)
3 kW marka korantada shaqaynaysa <= 220/240 V AC, 50/60 Hz (AC - 3e)
5.5 kW marka korantada shaqaynaysa <= 380/400 V AC, 50/60 Hz (AC - 3e)
5.5 kW marka korantada shaqaynaysa <= 415/440 V AC, 50/60 Hz (AC - 3e)
7.5 kW marka korantada shaqaynaysa <= 660/690 V AC, 50/60 Hz (AC - 3e)
Qaabka
Nooca Xiriirada Wareegga
Daboolka ilaalinta
Kuleylinta Caadiga ah ee Hadda [Ith]
10 A (marka heerkulka hawlgalka <= 60 °C) ee wareegga signalka.
Lagu qiimeeyay -wakhti gaaban u adkaysanaysa hadda [Icw]
210 A marka heerkulka hawlgalka <= 40 °C, waara 1 s ee wareegga korantada.
30 A marka heerkulka hawlgalka <= 40 °C, waara 10 daqiiqo wareegga korantada.
61 A marka heerkulka hawlgalka <= 40 °C, waara 1 daqiiqo wareegga korantada.
100 A, waara 1 s ee wareegga signalka.
120 A, waara 500 ms ee wareegga signalka.
140 A, waara 100 ms ee wareegga signalka.
Fiyuusyada Loo Isticmaalo Isku-xidhka Relays
40 A gG marka korantada shaqaynaysa <= 690 V, oo la socota Nooca 1, ee wareegga korantada.
25 A gG marka korantada shaqaynaysa <= 690 V, oo la socota Nooca 2, ee wareegga korantada.
Celceliska Culayska
Korontada dahaarka ee la qiimeeyay [Ui]
Wareegga isha: 690V, si waafaqsan IEC 60947-1.
Qaybta korantada xad dhaafka ah
Darajada wasakhowga
La qiimeeyay ku adkaysiga korantada [Uimp]
Heerka Badbaadada iyo Isku halaynta
B10d = 2000000 jeer xiriiriyeyaasha leh culeyska farsamada, sida waafaqsan EN/ISO 13849-1.
Nolosha Makaanikada
Nolosha Korontada
0.8 Mcycles at 25 A, AC - 1, Ue xaaladaha <= 440 V.
2.2 Mcycles at 9 A, AC - 3, Ue xaaladaha 660/690 V.
2 Mcycles at 12 A, AC – 3e, Ue xaaladaha <= 440 V.
2.2 Mcycles at 9 A, AC - 3e, Ue xaaladaha 660/690 V.
Tilmaamaha Wareegga Xakamaynta
Module Xakamaynta Qalliinka
Xakamaynta Korantada Xadka
0.8…1.1 Uc (- 40…60 °C): Gariiradda bilawga ah, 50 Hz.
0.85…1.1 Uc (- 40…60 °C): Gariiradda bilawga ah, 60 Hz.
Isticmaalka Korontada (VA) (~ 50Hz Bilaabid)
70 VA at 50 Hz, cos phi 0.75 (at 20 °C)
Isticmaalka Korontada (VA) (~ Haysashada 50Hz)
6 VA at 50 Hz, cos phi 0.3 (at 20 °C)
Kuleyl daadi
Waqti Ficil
4…19 ms furitaanka
Inta ugu badan ee shaqaynta
Awoodda xadhkaha
Wareegga korantada: xidhidhiyaha xidhan 2, 1…4 mm², dhexroorka lugaha ee terminal Ø: 8 mm, nooca fiilada: silig dabacsan oo aan lahayn terminal.
Wareegga korantada: xidhidhiyaha xidhan 1, 1…4 mm², dhexroorka dabaasha ee lugaha Ø: 8 mm, nooca fiilada: xadhig dabacsan oo leh terminal.
Wareegga korantada: xidhidhiyaha xidhan 2, 1…2.5 mm², dhexroorka dabaasha ee lugaha Ø: 8 mm, nooca fiilada: xadhig dabacsan oo leh terminal.
Wareegga korantada: Xidhid xidhan 1, 1…4 mm², dhexroorka lugaha ee terminal Ø: 8 mm, nooca fiilada: silig adag oo aan lahayn terminal.
Wareegga korantada: Xidhid xidhan 2, 1…4 mm², dhexroorka lugaha ee terminal Ø: 8 mm, nooca fiilada: silig adag oo aan lahayn terminal.
Xakamaynta wareegga: xidhidhiyaha xidhan 1, 1…4 mm², nooca fiilada: silig dabacsan oo aan lahayn terminal.
Xakamaynta wareegga: xidhidhiyaha xidhan 2, 1…4 mm², nooca fiilada: silig dabacsan oo aan lahayn terminal.
Xakamaynta wareegga: xidhidhiyaha xidhan 1, 1…4 mm², nooca fiilada: silig dabacsan oo leh terminal.
Xakamaynta wareegga: xidhidhiyaha xidhan 2, 1…2.5 mm², nooca fiilada: silig dabacsan oo leh terminal.
Xakamaynta wareegga: xidhidhiyaha xidhan 1, 1…4 mm², nooca fiilada: silig adag oo aan lahayn terminal.
Xakamaynta wareegga: xidhidhiyaha xidhan 2, 1…4 mm², nooca fiilada: silig adag oo aan lahayn terminal.
Adkeynta Torque
Wareegga korantada: 1.7 Nm iyada oo loo marayo iskutallaab ku xidhidh - madaxa kaashatada No 2.
Xakamaynta wareegga: 1.7 Nm iyada oo loo marayo xidhid xidhan oo leh kaashawiito daab leh oo fidsan Ø 6.
Xakamaynta wareegga: 1.7 Nm iyada oo loo marayo xidhid xidhan oo iskutallaab ah - kaashatada madaxa No 2.
Wareegga korantada: 1.7 Nm iyada oo loo marayo isku xirka fiilada oo leh muraayad-fure Ø 6, fur: M3.5.
Wareegga korantada: 1.7 Nm iyada oo loo marayo isku xirka fiilada oo leh iskutallaab - furaha madaxa No 2, fur: M3.5.
Xakamaynta wareegga: 1.7 Nm iyada oo loo marayo xidhid xiran oo leh kaashawiito pozidriv No 2.
Wareegga korantada: 1.7 Nm iyada oo loo marayo xidhid xiran oo leh kaashawiito pozidriv No 2.
Nooca Xiriirada Caawinta
Muraayada Nooca - lagu sawiray Gobolka Xidhiidhka Weyn 1 NC, si waafaqsan IEC 60947 - 4 - 1.
Xiriirada Kaaliyaha ah ee la heli karo Xiriiriyaha kasta
Inta jeer ee wareegga signalka
Bedelka Ugu Yar ee Hadda [Imin]
Iska caabinta dahaarka
10 MΩ ee wareegga signalada
Wakhti aan is-kordhin
1.5 ms inta u dhaxaysa NC iyo NO xiriir marka la tamarsiiyo.
Habka Koritaanka
Kordhinta guddiga
Deegaanka
Waafaqsanaanta Heerarka
IEC 60947 – 4 – 1
GB/T 14048.4
Shahaadada alaabta
UKCA
CCC
Qiimaynta Ilaalinta IP
IP2X ee guddiga hore, oo lagu dabaqi karo wareegga gariiradda, sida waafaqsan IEC 60529.
Tallaabooyinka Ilaalinta
Heerkulka hawada deegaanka
- 40…60C qalliinka
60…70C oo leh hoos udhigid. - 60…80C kaydinta
Joogitaanka shaqada
Dab iyo Sare Aan Caadi ahayn - Iska caabinta heerkulka
Naxdin iyo iska caabin gariir
Iska caabinta gariirku marka la xidhidhiyaha la xidho (4 gn (5…300 Hz)), si waafaqsan IEC 60068 – 2 – 6.
Cadaadiska naxdinta leh 11 ms marka xiriiradu furmaan (10 gn), sida waafaqsan IEC 60068 - 2-27.
Cadaadiska naxdinta leh 11 ms marka xiriirada la xiro (15 gn), si waafaqsan IEC 60068 - 2 - 27.
Dhererka
Ballaca
Qoto dheer
Miisaanka saafiga ah
Qaybta baakadaha
Tirada Cutubyada ku jira Xidhmada 1: 1
Xidhmada 1 Dhererka: 5.152 cm
Xidhmada 1 Ballac: 7.874 cm
Xidhmada 1 Dhererka: 9.441 cm
Xidhmada 1 Miisaanka: 341.0 g
Cutubka Nooca Xidhmada 2: S02
Tirada Cutubyada ku jira Xidhmada 2:24
Xidhmada 2 Dhererka: 15.0 cm
Xidhmada 2 Ballac: 30.0 cm
Xidhmada 2 Dhererka: 40.0 cm
Xidhmada 2 Miisaanka: 8.771 kg
Cutubka Nooca Xidhmada 3: PAL
Tirada Cutubyada ku jira Xidhmada 3: 384
Xidhmada 3 Dhererka: 60.0 cm
Xidhmada 3 Ballac: 80.0 cm
Xidhmada 3 Dhererka: 75.0 cm
Xidhmada 3 Miisaanka: 130.994 kg
Dammaanadda Qandaraaska
18 bilood
Darajada Agabka
| Qalab | Heerka ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 4104 30S |
| Heerka ASTM A480 | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 316H, 30HCb 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S30600, S30601, S312S302 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S332205,6 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Heerka | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS3301S2 SUS315J1, SUS315J2,SUS316,SUS316L,SUS316N,SUS316LN,SUS316Ti,SUS316J1,SUS316J1L,SUS317,SUS317L,SUS317LN,SUS3137J1,SUS313J1 SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430, SUS430LX, SUS43 SUS40 SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Tilmaamaha Alaabta
| dhame | Dhumucda | Astaamaha | Codsiyada |
| No. 1 | 3.0mm ~ 50.0mm | Waxaa lagu dhammeeyaa duub-lul-kulul, xoqid iyo qajaar, oo lagu garto dusha sare ee la soo qaaday | Qalabka warshadaha kiimikada, haamaha warshadaha |
| No. 2B | 0.3mm ~ 6.0mm | Lagu dhammeeyey daawaynta kulaylka, qajaarka ka dib duubista qabow, oo ay ku xigto khadka ka gudubka maqaarka si uu u noqdo mid dhalaalaya oo siman | Codsiga Guud Qalabka Caafimaadka, Qalabka Miiska |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Daawaynta kulaylka iftiinka leh ka dib duubista qabowga | Maacuunta jikada, alaabta jikada, ujeedada dhismaha |
| No. 4 | 0.4mm ~ 3.0mm | Ku sifayn leh lambar 150 ilaa 180 mesh abrasives. Dhammaadka ugu caansan | Qalabka lagu farsameeyo caanaha & cuntada, Qalabka Isbitaalka, Qubayska |
| No. 8 | 0.5mm ~ 2.0mm | Dusha milicsiga muraayadda u eeg iyadoo lagu sifaynayo nabaro ka wanaagsan 800 oo mesh | Milicsi, Muraayad, Qurxinta gudaha-Dibad-u-dhisidda |
| HL (khadka timaha) | 0.4mm ~ 3.0mm | Waxaa lagu dhammeeyay sixitaan toosan | Ujeedooyinka dhismaha, kororiyeyaasha, baabuurta alaabta jikada |
Halabuurka Kiimikada
| Darajo | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Mid kale | - | - | - | - | - |
| Lacagta400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
AnagaKu duub alaabta birta ah warqad lidka ku ah miridhku iyo siddo birta ah si aad uga hortagto burbur.
Calaamadaha aqoonsiga waxaa lagu calaamadeeyay si waafaqsan tilmaamaha caadiga ah ama tilmaamaha macmiilka.
Baakad gaar ah ayaa loo heli karaa iyadoo loo eegayo shuruudaha macmiilka.
Xirmada gariiradda birta ah ee aan-dhabta lahayn
Xirmada saxannada birta ah ee birta ah ee aan-kala-sooca lahayn
Xirmada Jilitaanka Birta Aan-La'aanta ah
Xidhmada Rarida
Shirkadeena waxay ku saleysan tahay Wuxi, oo ku soo ururisa magaalada warshadaha birta aan lahayn ee Shiinaha.
Waxaan ku takhasusnay gariiradaha, go'yaasha iyo saxannada, tuubooyinka birta ah iyo kuwa lagu xidho, tuubooyinka birta ah, iyo sidoo kale alaabta aluminium iyo alaabta naxaasta.
Alaabadayada waxaa aad u amaanay macaamiisheena ka kala yimid Yurub, Ameerika, Bariga Dhexe, Afrika iyo Koonfur-bari Aasiya. Waxaan macaamiisha u soo bandhigi doonaa badeecooyin tartan ah iyo adeeg dhammaystiran.
Fasalka Birta Aan-La'aanta ah: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 3, 40s 420, 430, 430F, 440, 440c,
Daawaha Daawaha: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Birta Xawaaraha Sarreya, Bir khafiifa, Aluminium, Birta Daawaha, Birta Kaarboon, Alloys Nikkel Gaarka ah
Qaabka: Baararka Wareega, Baararka labajibbaaran, Baararka laba geesoodka ah, Baararka fidsan, Xaglaha, Kanaalka, Profiles, Fiilooyinka, Xargaha, Go'yaalka, Taarikada, Tuubooyinka aan Xumaan lahayn, Tuubooyinka ERW, Flanges, Fittings, iwm.
Q1: Waa maxay wasakhda?
J: Isxaaq macneheedu waa wax calaamad ah oo aan lahayn birta dusheeda, ama nooc ka mid ah birta oo aanay hawada ama biyuhu waxyeelo u geysan oo aan isbeddelin midabka, aan dhib lahayn, u adkaysta wasakhaynta, miridhku, saamaynta daxalka ah ee kiimikooyinka.
Q2: Alaab la’aantu miyay ka dhigan tahay daxal la’aan?
J: Maya, daxalka macneheedu ma fududa in lagu wasakho ama daxalaystay, waxa ay leedahay awood gaar ah oo ay iskaga celiso wasakhaynta, miridhku iyo daxalka.
Q3: Ma bixisaa xaashiyaha birta ah ee aan-lahayn?
J: Haa, waxaanu bixinaa noocyo kala duwan oo xaashida birta ah, oo dhumucdiisu tahay 0.3-3.0mm. iyo dhamaystir kala duwan.
Q4: Ma aqbashay in la gooyo adeega dhererka?
J: Dabcan, ku qanacsanaanta macaamilka ayaa ah mudnaantayada ugu sareysa.
Q5: Haddii aan haysto amar yar, ma aqbashaa amar yar?
J: Dhib maaha, welwelkaagu waa danteena, tiro yar ayaa la aqbalayaa.
Q6: Sideed u dammaanad qaadi kartaa tayada alaabtaada?
J: Horta, bilawgiiba, waxa aanu hore u hirgelinay ruux maskaxdooda ku jira, taasi waa tayadu waa nolosha, shaqaalahayaga xirfadlayaasha ah iyo shaqaalaheenna waxa ay raacayaan tallaabo kasta ilaa alaabtu si fiican uga soo rarto.
Q7: Ma xirxiran doontaa alaabta?
J: Dadka xirfadleyda ah waxay sameeyaan xirxirayaal xirfadlayaal ah, waxaan haynaa noocyo kala duwan oo xirxiran oo ikhtiyaar u ah macaamiisha, mid dhaqaale ama mid ka sii fiican.
Q8: Maxaad u baahan tahay inaad ka ogaato macaamilka ka hor inta aan la sheegin?
J: Si loo helo oraah sax ah, waxaan u baahanahay inaan ogaano darajada, dhumucda, cabbirka, dhamaadka dusha sare, midabka iyo tirada dalabkaaga, iyo sidoo kale meesha alaabta. Macluumaadka badeecada la habeeyey ayaa loo baahan doonaa in ka badan, sida sawirista, qaabaynta iyo qorshaha. Markaa waxaanu bixin doonaa odhaah tartan ah oo leh macluumaadka kor ku xusan.
Q9: Waa maxay nooca lacag bixinta ee aad aqbashay?
J: Waxaan aqbalnaa T/T, Midowga Galbeedka, L/C.
Q10: Haddii kani yahay dalab yar, ma u geyn doontaa alaabta wakiilkayaga?
J: Haa, waxaanu u dhalanay inaanu xalino mashaakilaadka macaamiisheena, waxaanu alaabta si nabad ah ugu geyn doonaa bakhaarka wakiilkaaga, waxaanu kuu soo diri doonaa sawirada.
S11: Ma samaysaa go' fidsan? Waxaan rabaa in aan been abuur u sameeyo mashruucayga cusub.
J: Maya, inta badan waxaanu soo saarnaa daawaynta dusha sare ee birta ah, isla mar ahaantaana, waxaanu soo saareynaa alaab bir ah oo la hagaajiyay sida sawirka iyo qorshaha macmiilka, farsamoyaqaankeena ayaa daryeeli doona inta kale.
S12: Immisa xabo oo aad horay u dhoofisay?
J: Waxa loo dhoofiyay in ka badan 50 wadan oo u badan America, Russia, UK, Kuwait, Egypt, Iran,
Turkiga, Urdun, iwm.
Q13: Sideen ku heli karaa muunado?
J: Tijaabooyin yaryar ayaa dukaanka yaal waxayna ku siin karaan shaybaarada bilaash. Catalgue waa la heli karaa, inta badan
qaababka waxaanu haynaa muunado diyaar ah oo kayd ah. Tijaabooyin gaar ah ayaa qaadan doona qiyaastii 5-7 maalmood.
Q14: Waa maxay keenista?
J: Tusaalaha dalabka wakhtiga keenista waa 5-7 maalmood. Dalabka weelasha waa ilaa 15-20 maalmood.
Q15: Waa maxay codsiga ku saabsan alaabtaada?
A: 1.Albaabka wiishka/cabin ama iyo darbiga dhinaceed ee koriyaha.
2.Darbiga gudaha ama dibadda qolka shirarka/maqaayada.
3.Facade marka wax lagu dul maro, sida tiirarka qolka fadhiga.
4. Saqafka sare ee dukaanka. 5. Sawirada qurxinta meelaha madadaalada qaarkood.
Q16: Ilaa intee ayaad dammaanad qaadi kartaa alaabtan/dhammaystirka?
J: Dammaanad midab leh in ka badan 10 sano. Shahaadada tayada agabka asalka ah ayaa kara
lagu siiyo.
