Tuubo Bir ah oo aan xuduud lahayn
Sharaxaad Gaaban:
Tuubbo Bir ah oo aan lahayn
| magac | tuubo bir ah oo aan lahayn |
| Fasal | 202 304 304L 309S 310S 316L 316Ti 317L 321 347 904L 2205 2507 .iwm |
| Heerka Caadiga ah | ASTM,AISI, ASME,SUS,JIS,EN,DIN,BS,GB .iwm |
| Dhammaad | La qaboojiyey oo la miiray, la qaboojiyey oo dhalaalaya, la safeeyey |
| Dhammaadyada | Dabool godan ama mid caadi ah, laba jibbaaran, aan lahayn burr, Dabool balaastig ah labada dhinacba |
| cabbirka
| OD: 6-630 mm |
| Dhumucda Darbiga: 1-50mm | |
| Dhererka: 6m, 12m ama sida loogu baahdo | |
| codsiga | Warshadaha adeegga guud (batrool, cunto, kiimiko, warqad, bacrimin, dhar, duulista hawada iyo nukliyeerka) Dareeraha, gaaska iyo gaadiidka saliidda) Cadaadis |
Halabuurka kiimikada
| Fasal | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Kale | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Heerka Agabka
| Alaab | Heerka ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 4104 30S |
| Heerka ASTM A480 | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31254, S31266,S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Heerka | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| Heerka JIS G4305 | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Qeexitaanka Badeecada
| Dhammaad | Dhumucda | Astaamaha | Codsiyada |
| Lambarka 1aad | 3.0mm ~ 50.0mm | Waxaa lagu dhammeeyay duub kulul, xoqid iyo qajaar, oo lagu garto dusha sare ee cad ee la shiiday | Qalabka warshadaha kiimikada, Taangiyada warshadaha |
| Lambarka 2B | 0.3mm ~ 6.0mm | Waxaa lagu dhammeeyaa daawaynta kulaylka, qajaarka la shiiday ka dib marka la rogo qabow, ka dibna maqaarka ayaa si fiican u nuugaya oo siman. | Qalabka Caafimaadka ee Guud, Qalabka Miiska |
| Maya. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Daawaynta kulaylka dhalaalaya ka dib rogista qabowga | Qalabka jikada, qalabka jikada, ujeedo dhismeed |
| Lambarka 4aad | 0.4mm ~ 3.0mm | Ku dhalaalinta makiinadaha birta ah ee lambar 150 ilaa lambar 180. Dhammaystirka ugu caansan | Xarumaha Caanaha & Cuntada lagu farsameeyo, Qalabka Isbitaalka, Musqusha |
| Lambarka 8aad | 0.5mm ~ 2.0mm | Dusha muraayad u eg oo milicsan iyadoo lagu rinjiyeynayo xoqeyaal khafiif ah oo ka badan 800 oo mesh | Dib-u-soo-celiye, Muraayad, Qurxinta Gudaha iyo Dibadda ee dhismaha |
| HL (Xariiqda Timaha) | 0.4mm ~ 3.0mm | Waxaa lagu dhammeeyay nadiifin toosan oo joogto ah | Ujeeddooyinka dhismaha, jaranjarooyinka, gawaarida qalabka jikada |
Halabuurka Kiimikada
| Fasal | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Kale | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
AnnagaKu duub alaabta birta aan miridhku lahayn warqad ka hortagta miridhku iyo faraanti bir ah si looga hortago waxyeelada.
Calaamadaha aqoonsiga waxaa lagu calaamadeeyaa iyadoo loo eegayo qeexitaanka caadiga ah ama tilmaamaha macaamiisha.
Baakad gaar ah ayaa la heli karaa iyadoo loo eegayo baahida macaamiisha.
Xidhmada Gariiradda Birta ah ee aan Daxalka lahayn
Xaashida Birta Aan Daxalka Lahayn / Xidhmada Saxanka Birta Aan Daxalka Lahayn
Xirmada Xarig Bir ah oo aan Daxal lahayn
Xirmada Rarista
Shirkaddayadu waxay ku taallaa Wuxi, iyadoo ururinaysa magaalada birta aan miridhku lahayn ee warshadaha ee Shiinaha.
Waxaan ku takhasusnay gariiradaha aan daxalka lahayn, xaashiyaha iyo saxanka, tuubooyinka iyo qalabka birta aan daxalka lahayn, tuubooyinka birta aan daxalka lahayn, iyo sidoo kale alaabada aluminiumka iyo alaabada naxaasta ah.
Badeecadahayaga waxaa si weyn u ammaanay macaamiisheenna ka kala yimid Yurub, Ameerika, Bariga Dhexe, Afrika iyo Koonfur-bari Aasiya. Waxaan macaamiisha u fidin doonnaa badeecooyin tartan iyo adeeg dhammaystiran.
Heerka Birta Aan Daxalka Ahayn: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Darajada Daawaha: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, Bir Xawaaraha Sare, Bir Fudud, Aluminium, Bir Daawaha, Bir Kaarboon, Alloy Gaar ah
Qaab ahaan: Baararka Wareega, Baararka Laba-jibbaaran, Baararka Lix-geesoodka ah, Baararka Fidsan, Xaglaha, Kanaalada, Astaamaha, Fiilooyinka, Ulaha Siligga, Go'yaasha, Taarikada, Tuubooyinka aan kala go 'lahayn, Tuubooyinka ERW, Flanges, Qalabka rakiban, iwm.
S1: Waa maxay daxalka aan lahayn?
A: Bir aan lahayn macneheedu waa wax calaamado ah oo ku yaal dusha sare ee birta, ama nooc bir ah oo aan hawo ama biyo waxyeello u geysan oo aan beddelin midabka, aan wasakh lahayn, u adkaysta wasakhda, miridhku, saamaynta daxalka ee kiimikooyinka.
S2: Macnaheedu ma yahay in aan miridhku jirin?
A: Maya, macnuhu waa in aan si fudud loo wasakhayn ama miridhku u daxalaysanayn, waxay leedahay awood gaar ah oo ay kaga hortagto wasakhda, miridhku iyo miridhku.
S3: Ma bixisaa xaashiyo bir ah oo aan daxal lahayn?
J: Haa, waxaanu bixinaa noocyo kala duwan oo xaashi bir ah oo aan daxal lahayn ah, oo dhumucdiisuna u dhaxayso 0.3-3.0mm. iyo dhammaystiryo kala duwan.
S4: Ma aqbashaa adeeg goyn ilaa dherer ah?
J: Dabcan, qanacsanaanta macaamiishu waa mudnaantayada koowaad.
S5: Haddii aan haysto dalab yar, ma aqbashaa dalab yar?
J: Ma aha dhibaato, walaacaagu waa walaaceena, tiro yar ayaa la aqbalaa.
S6: Sideed u damaanad qaadi kartaa tayada alaabtaada?
J: Marka hore, laga bilaabo bilowgii, waxaan horey u hirgelinay ruux maskaxdooda ku jira, taas oo ah tayo waa nolol, shaqaalaheenna xirfadlayaasha ah iyo shaqaalaheenna ayaa la socon doona tallaabo kasta ilaa alaabtu si fiican u buuxsanto oo loo raro.
Q7: Ma alaabtaad xirxiran doontaa?
A: Dad xirfadlayaal ah ayaa sameeya baakado xirfad leh, waxaan haysannaa noocyo kala duwan oo baakado ah oo ikhtiyaari u ah macaamiisha, mid dhaqaale ahaan ama mid ka wanaagsan.
S8: Maxaad u baahan tahay inaad ka ogaato macaamiisha ka hor inta aadan si sax ah u soo xigan?
J: Si aad u hesho qiimeyn sax ah, waxaan u baahanahay inaan ogaano heerka, dhumucda, cabbirka, dhammaystirka dusha sare, midabka iyo tirada dalabkaaga, iyo sidoo kale meesha alaabta loo socdo. Macluumaadka badeecadaha la habeeyey ayaa loo baahan doonaa wax badan, sida sawirka, qaabaynta iyo qorsheynta. Kadib waxaan bixin doonnaa qiimeyn tartan ah oo leh macluumaadka kor ku xusan.
Q9: Noocee ah muddada lacag bixinta ee aad aqbasho?
A: Waxaan aqbalnaa T/T, West union, L/C.
S10: Haddii dalab yar uu yahay, ma alaabta u geyn doontaa wakiilkayaga?
J: Haa, waxaan u dhalanay inaan xallino dhibaatooyinka macaamiisheenna, alaabta si ammaan ah ayaan ugu geyn doonnaa bakhaarka wakiilkaaga oo waxaan kuu soo diri doonnaa sawirrada.
S11: Ma kaliya ayaad samaysaa xaashi fidsan? Waxaan rabaa inaan sameeyo wax lagu farsameeyo mashruucayga cusub.
J: Maya, waxaan inta badan soo saarnaa daaweyn dusha sare oo bir ah oo aan miridh lahayn, isla markaana, waxaan soo saarnaa badeeco bir ah oo la habeeyey sida waafaqsan sawirka iyo qorshaha macaamiisha, farsamo yaqaankayagu wuxuu daryeeli doonaa inta soo hartay.
S12: Imisa waddan ayaad horey u dhoofisay?
A: Waxaa loo dhoofiyay in ka badan 50 waddan oo inta badan ka yimid Ameerika, Ruushka, UK, Kuwait, Masar, Iran,
Turkiga, Urdun, iwm.
S13: Sideen ku heli karaa muunado?
A: Muunado yaryar ayaa dukaanka yaalla waxayna ku siin karaan muunado bilaash ah. Catalgue waa la heli karaa, badankooduna waa diyaar.
Qaababka waxaan haysannaa muunado diyaar ah oo kayd ah. Muunado la habeeyey waxay qaadan doonaan qiyaastii 5-7 maalmood.
S14: Waa maxay gaarsiintu?
J: Waqtiga keenista dalabka muunadda waa 5-7 maalmood. Dalabka weelku waa qiyaastii 15-20 maalmood.
S15: Waa maxay codsiga ku saabsan alaabtaada?
A: 1. Albaabka wiishka/qolka ama derbiga dhinaca wiishka.
2. Dahaarka derbiga gudaha ama dibadda qolka shirarka/makhaayadda.
3. Waji ka soo bax marka aad wax ku dahaadhayso, sida tiirarka ku yaal hoolka.
4. Saqaf ku yaal suuqa weyn. 5. Sawiro qurxin ah oo laga sameeyay meelo madadaalo ah.
S16: Intee in le'eg ayaad damaanad qaadi kartaa badeecadan/dhammaystirka?
A: Dammaanad midab leh in ka badan 10 sano. Shahaadada tayada agabka asalka ah ayaa la heli karaa
la bixinayo.
