Tlhaloso: Schneider LC1D12CC7C
Tlhaloso e Khutšoanyane:
Schneider Electric TeSys Deca Series Contactor LC1D12CC7C, 3 - pole, 12A, AC - 3, 5.5kW ho 400V, 1 Ka tloaelo Bula + 1 Hangata e koetsoe puisano e thusang, 36V 50 / 60Hz AC coil, Screw - mofuta oa wiring, CACHS - mofuta oa wiring, CACHS
Lintlha Tse ka Sehloohong
Letoto la Lihlahisoa
Letoto la Lihlahisoa
Mofuta oa Sehlahisoa
Lebitso le Lekgutshwane la Sehlahiswa
Libaka tsa Kopo tsa Contactor
E sebelisoa ho meroalo e sa tsitsang kapa e fokolang hanyane, libono tsa ho hanyetsa.
Lihlopha tsa Tšebeliso
AC-1
AC-3
AC – 3e
Palo ea Mapolanka
Rated Working Voltage [Ue]
Potoloho ea matla: <= 300 V DC
Rated Working Current [Ie]
12 A (ha mocheso o sebetsang <= 60 °C) ha motlakase o sebetsang <= 440 V AC, AC - 3 bakeng sa potoloho ea matla.
12 A (ha mocheso o sebetsang <= 60 ° C) ha motlakase o sebetsang <= 440 V AC, AC - 3e bakeng sa potoloho ea matla.
Control Circuit Voltage [Uc]
Boitsebiso ba Tlatsetso
Matla a Enjene (kW)
3 kW ha motlakase o sebetsang <= 220/240 V AC, 50/60 Hz (AC – 3)
5.5 kW ha motlakase o sebetsang <= 380/400 V AC, 50/60 Hz (AC - 3)
5.5 kW ha motlakase o sebetsang <= 415/440 V AC, 50/60 Hz (AC - 3)
7.5 kW ha motlakase o sebetsang <= 660/690 V AC, 50/60 Hz (AC - 3)
7.5 kW ha motlakase o sebetsang <= 500 V AC, 50/60 Hz (AC - 3e)
3 kW ha motlakase o sebetsang <= 220/240 V AC, 50/60 Hz (AC – 3e)
5.5 kW ha motlakase o sebetsang <= 380/400 V AC, 50/60 Hz (AC – 3e)
5.5 kW ha motlakase o sebetsang <= 415/440 V AC, 50/60 Hz (AC - 3e)
7.5 kW ha motlakase o sebetsang <= 660/690 V AC, 50/60 Hz (AC - 3e)
Mohlala
Mofuta oa Mabitso a Potoloho
Sekoahelo se Sireletsang
Mocheso o Tloaelehileng oa Hona Joale [Ith]
10 A (ha mocheso o sebetsang <= 60 °C) bakeng sa potoloho ea pontšo.
E behiloe Nako e Khutšoane – Nako E Mamelle Hona Joale [Icw]
210 A ha mocheso o sebetsang <= 40 °C, o tsitsitseng bakeng sa 1 s bakeng sa potoloho ea matla.
30 A ha mocheso o sebetsang <= 40 °C, o tšoarella metsotso e 10 bakeng sa potoloho ea matla.
61 A ha mocheso o sebetsang <= 40 °C, o tšoarella motsotso o le mong bakeng sa potoloho ea matla.
100 A, e tsitsitseng bakeng sa 1 s bakeng sa potoloho ea pontšo.
120 A, e tšoarellang bakeng sa 500 ms bakeng sa potoloho ea matšoao.
140 A, e tsitsitseng bakeng sa 100 ms bakeng sa potoloho ea matšoao.
Li-Fuse tse sebelisitsoeng hammoho le li-relay
40 A gG ha motlakase o sebetsang <= 690 V, hammoho le Mofuta oa 1, bakeng sa potoloho ea matla.
25 A gG ha motlakase o sebetsang <= 690 V, hammoho le Mofuta oa 2, bakeng sa potoloho ea matla.
Karolelano ea Impedance
Rated Insulation Voltage [Ui]
Potoloho ea matšoao: 690 V, ho latela IEC 60947 - 1.
Sehlopha sa Overvoltage
Tekanyo ea Tšilafalo
Rated Impulse Withstand Voltage [Uimp]
Tšireletseho le Boemo ba ho Tšepahala
B10d = makhetlo a 20000000 bakeng sa likhokahano tse nang le mojaro oa mochini, ho latela EN/ISO 13849 - 1.
Bophelo ba Mechini
Bophelo ba Motlakase
0.8 Li-Mcycles ho 25 A, AC - 1, maemo a Ue <= 440 V.
2.2 Li-Mcycles ho 9 A, AC - 3, maemo a Ue 660/690 V.
2 Li-Mcycles ho 12 A, AC - 3e, maemo a Ue <= 440 V.
2.2 Li-Mcycles ho 9 A, AC - 3e, maemo a Ue 660/690 V.
Laola Litšobotsi tsa Potoloho
Surge Suppression Module
Laola Voltage Limit
0.8…1.1 Uc (- 40…60 °C): Qalo ea khoele, 50 Hz.
0.85…1.1 Uc (- 40…60 °C): Qalo ea khoele, 60 Hz.
Tšebeliso ea Matla (VA) (~ 50Hz Ho qala)
70 VA ho 50 Hz, cos phi 0.75 (ho 20 °C)
Tšebeliso ea Matla (VA) (~50Hz Holding)
6 VA ho 50 Hz, cos phi 0.3 (ho 20 °C)
Pheliso ea Mocheso
Ketso Nako
4…19 ms bakeng sa ho bula
Boholo ba Maqhubu a Tshebetso
Matla a Wiring
Potoloho ea motlakase: Ho tiisa ka bolt 2, 1…4 mm², theminale lug bophara ba bokantle Ø: 8 mm, mofuta oa thapo: terata e feto-fetohang ntle le theminale.
Potoloho ea motlakase: Ho tiisa ka bolt 1, 1…4 mm², theminale lug bophara ba bokantle Ø: 8 mm, mofuta oa thapo: terata e feto-fetohang e nang le theminale.
Potoloho ea motlakase: Ho tiisa ka bolt 2, 1…2.5 mm², theminar lug bophara ba bokantle Ø: 8 mm, mofuta oa cable: terata e feto-fetohang e nang le theminale.
Potoloho ea motlakase: Ho tiisa ka bolt 1, 1…4 mm², theminale lug bophara ba bokantle Ø: 8 mm, mofuta oa cable: terata e thata ntle le theminale.
Potoloho ea motlakase: Ho tiisa ka bolt 2, 1…4 mm², theminale lug bophara ba bokantle Ø: 8 mm, mofuta oa thapo: terata e thata e se nang theminale.
Potoloho ea taolo: Ho tiisa ka bolt 1, 1…4 mm², mofuta oa thapo: terata e feto-fetohang ntle le theminale.
Potoloho ea taolo: Ho tiisa ka bolt 2, 1…4 mm², mofuta oa cable: terata e feto-fetohang ntle le theminale.
Potoloho ea taolo: Ho tiisa ka bolt 1, 1…4 mm², mofuta oa thapo: terata e feto-fetohang e nang le theminale.
Potoloho ea taolo: Ho tiisa ka bolt 2, 1…2.5 mm², mofuta oa thapo: terata e feto-fetohang e nang le theminale.
Potoloho ea taolo: Ho tiisa ka bolt 1, 1…4 mm², mofuta oa thapo: terata e thata ntle le theminale.
Potoloho ea taolo: Fastening ea bolt 2, 1…4 mm², mofuta oa thapo: terata e thata ntle le theminale.
Torque e matlafatsang
Potoloho ea matla: 1.7 Nm ka ho tiisa ka bolt ka sefapano - hlooho ea screwdriver No 2.
Potoloho ea taolo: 1.7 Nm ka ho tiisa ka liboutu ka screwdriver e nang le bladed Ø 6.
Potoloho ea taolo: 1.7 Nm ka ho tiisa ka bolt ka sefapano - hlooho ea screwdriver No 2.
Potoloho ea matla: 1.7 Nm ka sehokelo sa thapo se nang le screwdriver e sephara - bladed Ø 6, screw: M3.5.
Potoloho ea matla: 1.7 Nm ka sehokelo sa cable se nang le sefapano - hlooho ea screwdriver No 2, screw: M3.5.
Potoloho ea taolo: 1.7 Nm ka ho tiisa ka bolt ka pozidriv screwdriver No 2.
Potoloho ea matla: 1.7 Nm ka ho tiisa ka bolt ka pozidriv screwdriver No 2.
Mofuta oa Mabitso a Thusang
Seipone sa Mofuta - se tšoantšitsoeng le Main Contact State 1 NC, ho latela IEC 60947 - 4 - 1.
Mabitso a A fumanehang ho Mohokahanyi ka mong
Maqhubu a Potoloho ea Letšoao
Bonyane bo Fetohang ba Hona Joale [Imin]
Khanyetso ea Insulation
10 MΩ bakeng sa potoloho ea lets'oao.
Nako e sa feteng
1.5 ms lipakeng tsa NC le NO mabitso ha o matlafalitsoe.
Mounting Mount
Ho kenya liphanele
Tikoloho
Ho Ikamahanya le Maemo
Setšoantšo sa IEC 60947-4-1
GB/T 14048.4
Setifikeiti sa Sehlahisoa
UKCA
CCC
Tekanyetso ea Tšireletso ea IP
IP2X bakeng sa phanele e ka pele, e sebetsang ho potoloho ea coil, ho latela IEC 60529.
Mehato ea Tšireletso
Ambient Air Mocheso
- 40…60 °C bakeng sa ts'ebetso.
60…70 °C e nang le derating. - 60…80 °C bakeng sa polokelo.
Bophahamo ba Mosebetsi
Mollo le Phahameng e sa Tloaelehang - Ho hanyetsa mocheso
Tšisinyeho le Ho thothomela
Ho hanyetsa ho sisinyeha ha mabitso a koetsoe (4 gn (5…300 Hz)), ho latela IEC 60068 - 2 - 6.
Ho hanyetsa ho ts'oha 11 ms ha mabitso a bulehile (10 gn), ho latela IEC 60068 - 2 - 27.
Ho hanyetsa ho ts'oha 11 ms ha mabitso a koetsoe (15 gn), ho latela IEC 60068 - 2 - 27.
Bophahamo
Bophara
Botebo
Boima bo kahare
Yuniti ea ho paka
Palo ea Liyuniti ka har'a sephutheloana sa 1: 1
Pakete ea 1 Bophahamo: 5.152 cm
Pakete ea 1 Bophara: 7.874 cm
Pakete ea 1 Bolelele: 9.441 cm
Sephutheloana sa 1 Boima: 341.0 g
Mofuta oa Sephutheloana sa 2: S02
Palo ea likarolo ka har'a sephutheloana sa 2:24
Pakete ea 2 Bophahamo: 15.0 cm
Pakete ea 2 Bophara: 30.0 cm
Pakete ea 2 Bolelele: 40.0 cm
Pakete ea 2 Boima: 8.771 kg
Mofuta oa Sehlopha sa Pakete ea 3: PAL
Palo ea Liyuniti ka har'a sephutheloana sa 3: 384
Sephutheloana sa 3 Bophahamo: 60.0 cm
Pakete ea 3 Bophara: 80.0 cm
Pakete ea 3 Bolelele: 75.0 cm
Pakete ea 3 Boima: 130.994 lik'hilograma
Tiisetso ea Konteraka
Likhoeli tse 18
Kereiti ea lintho tse bonahalang
| Lintho tse bonahalang | ASTM A240 e tloaelehileng | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 400S 409 |
| ASTM A480 e tloaelehileng | 302. 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904,N08926, S31277, S20161, S30600, S30601, S31256, S3125, S3125 S32654, S32053, S31727, S33228, S34565, S35315,S31200, S31803, S32001, S32550, S31260, S32003, S32101,S322504, S32205 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 E tloaelehileng | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 E tloaelehileng | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu,SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2,SUS305, SUS309S, SUS301S SUS315J1, SUS315J2,SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1,SUS316J1L,SUS317, SUS317L, SUS317LN, SUS317USSL362J SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LJ3, SUS4LJ3S4, SUS4L4, SUS404, SUS4054 SUS436J1L,SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403,SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Tlhaloso ea Sehlahisoa
| Qetella | Botenya | Litšobotsi | Lisebelisoa |
| No. 1 | 3.0mm ~ 50.0mm | E phethiloe ka ho chesa, ho phunya le ho khetha, ho khetholloang ka holim'a metsi a masoeu | Lisebelisoa tsa indasteri ea lik'hemik'hale, litanka tsa indasteri |
| No. 2B | 0.3mm ~ 6.0mm | E phethiloe ke mocheso kalafo, pickling ka mor'a hore batang rolling, lateloa ke letlalo feta mola ho ba ho feta e khanyang le boreleli holim'a metsi | Lisebelisoa tsa Kakaretso tsa Kopo ea Bongaka, Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | Phekolo e khanyang ea mocheso ka mor'a hore ho be le serame | Lisebelisoa tsa kichineng, thepa ea kichineng, morero oa ho haha |
| No.4 | 0.4mm ~ 3.0mm | Ho pentša ka No. 150 ho ea ho No.180 mesh abrasives. Liphetho tse tsebahalang haholo | Lisebelisoa tsa ho lokisa Lebese le Lijo, Lisebelisoa tsa Sepetlele, Bate |
| No.8 | 0.5mm ~ 2.0mm | Sebaka se benyang se kang seipone ka ho bentša ka li-abrasives tse ntle ho feta 800 mesh | Reflector, seipone, ka hare-kantle mokhabiso bakeng sa moaho |
| HL(Moriri) | 0.4mm ~ 3.0mm | E phethetsoe ka ho bentša ho sa feleng | Merero ea meralo, li-escalator, likoloi tsa thepa ea kichine |
Sebopeho sa Lik'hemik'hale
| Kereiti | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5,50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0.035 | ≤0.03 | 21.00-24.00 | 4.50-6,50 | 2.50-3,50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0.035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0.045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Tse ding | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0.024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0,40 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0.025 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0,75 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0,95 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0.035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0.015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0.025 | - | 0.3+3C-0.9 |
Ronaphuthela lihlahisoa tsa tšepe tse sa hloekang ka pampiri e khahlanong le mafome le mehele ea tšepe ho thibela tšenyo.
Li-labels tsa boitsebiso li tšoailoe ho latela litlhaloso tse tloaelehileng kapa litaelo tsa moreki.
Ho pakela ho khethehileng hoa fumaneha ho latela tlhoko ea moreki.
Sephutheloana sa Coil ea tšepe e se nang tšepe
Letlapa la Letlapa / Sephutheloana sa Plate ea tšepe e sa hloekang
Sephutheloana sa Strip Strip
Sephutheloana sa Thomello
Khamphani ea rona e thehiloe Wuxi, 'me e bokella toropo ea tšepe e sa hloekang ea indasteri naheng ea China.
Re ne re ikhetha ka li-coil tse sa hloekang, lishiti le poleiti, phala ea tšepe e sa hloekang le li-fittings, li-tubes tsa tšepe e sa hloekang, hammoho le lihlahisoa tsa aluminium le lihlahisoa tsa koporo.
Lihlahisoa tsa rona li rorisitsoe haholo ke bareki ba rona ba tsoang Europe, Amerika, Middle East, Afrika le Asia Boroa-bochabela. Re tla fana ka lihlahisoa tsa tlhōlisano le tšebeletso e pharaletseng ho bareki.
Sehlopha sa Stainless Steel: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316, 4 1, 3 420, 430, 430F, 440, 440c,
Alloy Grade: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
Ka sebopeho sa : Li-Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings, joalo-joalo.
Q1: Stainless ke eng?
K: Stainless e bolela hore ha ho na matšoao holim'a tšepe, kapa mofuta oa tšepe o sa senngoeng ke moea kapa metsi, 'me o sa fetole 'mala, o se nang letheba, o hanyetsanang le matheba, mafome, le phello e senyang ea lik'hemik'hale.
Q2: Na ho se hloeke ho bolela hore ha ho na mafome?
K: Che, ha ho na letheba ho bolela hore ha ho bonolo ho ba le matheba kapa ho ba mafome, e na le bokhoni bo ikhethang ba ho hanela matheba, mafome le ho bola.
Q3: Na u fana ka lishiti tsa tšepe tse sa hloekang?
A: E, re fana ka mefuta e fapaneng ea lishiti tsa tšepe tse sa hloekang, tse nang le mefuta ea botenya ho tloha ho 0.3-3.0mm. le ka liphetho tse fapaneng.
Q4: Na u amohela tšebeletso ea ho khaola ho isa bolelele?
K: Ehlile, khotsofalo ea bareki ke eona ntho e tlang pele bophelong ba rona.
Q5: Haeba ke na le odara e nyane, na u amohela odara e nyane?
A: Ha se bothata, seo u amehileng ka sona ke seo re amehileng ka sona, litekanyetso tse nyane lia amoheloa.
Q6: U ka netefatsa boleng ba sehlahisoa sa hau joang?
A: Taba ea pele, ho tloha qalong, re se re kentse moea likelellong tsa bona, ke hore boleng ke bophelo, basebetsi ba rona ba litsebi le basebetsi ba tla latela mohato o mong le o mong ho fihlela thepa e phuthetsoe hantle le ho romelloa kantle.
Q7: Na u tla paka lihlahisoa?
A: Batho ba litsebi ba paka litsebi, re na le mefuta e fapaneng ea ho paka ka boikhethelo ho bareki, ba moruo kapa ba molemo.
Q8: U hloka ho tseba eng ho tsoa ho moreki pele u qotsa ka nepo?
K: Bakeng sa khotheishene e nepahetseng, re hloka ho tseba kereiti, botenya, boholo, pheletso ea bokaholimo, 'mala le bongata ba odara ea hau, hammoho le moo thepa e eang teng. Lintlha tse ikhethileng tsa sehlahisoa li tla hlokahala haholoanyane, joalo ka ho taka, moralo le moralo. Joale re tla fana ka khotheishene ea tlholisano le tlhaiso-leseling e kaholimo.
Q9: Ke nako ea mofuta ofe ea tefo eo u e amohelang?
A: Re amohela T/T, West union, L/C.
Q10: Haeba ena e le taelo e nyane, na o tla isa thepa ho moemeli oa rona?
A: E, re tsoaletsoe ho rarolla mathata a bareki ba rona, re tla fumana thepa ka mokhoa o sireletsehileng sebakeng sa polokelo ea moemeli oa hau ebe re u romella litšoantšo.
Q11: Na u etsa letlapa le bataletseng feela? Ke batla ho etsa moralo oa morero oa ka o mocha.
A: Che, haholo-holo re hlahisa phekolo ea tšepe e sephara ea tšepe e sephara, ka nako e ts'oanang, re etsa sehlahisoa se entsoeng ka tšepe se entsoeng ka mokhoa o hlophisitsoeng ho ea ka setšoantšo le moralo oa bareki, setsebi sa rona se tla hlokomela tse ling kaofela.
Q12: Ke li-coutries tse kae tseo u seng u li rometse kantle ho naha?
A: E romelloa linaheng tse fetang 50 haholo-holo ho tsoa Amerika, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordane joalo-joalo.
Q13: Nka fumana disampole joang?
A: Mehlala e menyenyane ka lebenkeleng 'me e ka fana ka lisampole mahala. Catalgue e fumaneha, haholo
lipaterone re na le disampole loketse setokong. Mehlala e ikhethileng e tla nka matsatsi a 5-7.
Q14: Ho tsamaisoa ke eng?
A: Nako ea tlhahiso ea mohlala ke matsatsi a 5-7. Litaelo tsa li-container li ka ba matsatsi a 15-20.
Q15: Ts'ebeliso ke efe ka Lihlahisoa tsa hau?
A: Lemati la 1.elevator/cabin kapa le lebota le ka lehlakoreng la escalator.
2. Ho roala lebota ka hare kapa ka ntle phaposing ea kopano/reschorente.
3.Facade ha u koahela ntho e itseng, joalo ka litšiea ka kamoreng ea baeti.
4.Ceiling ka lebenkeleng le leholo. 5.Decorative hulela libakeng tse ling tsa boithabiso.
Q16: U ka netefatsa nako e kae bakeng sa Sehlahisoa sena / Qetella?
A: Tiisetso ea mebala ka lilemo tse fetang 10. Setifikeiti sa boleng ba thepa ea mantlha e ka
fuwa.
