Schneider LC1D12CC7C
Katerangan pondok:
Schneider Electric TeSys Deca Series Contactor LC1D12CC7C, 3 - kutub, 12A, AC - 3, 5.5kW di 400V, 1 Biasana Buka + 1 Biasana Closed kontak bantu, 36V 50/60Hz AC coil, Screw - tipe wiring, CCC, RECS, CCC.
Émbaran Utama
Seri produk
Seri produk
Jenis produk
Ngaran Pondok Produk
Widang Aplikasi tina Contactor
Diterapkeun kana beban non-induktif atanapi rada induktif, tungku résistansi.
Kategori pamakéan
AC - 1
AC – 3
AC – 3e
Jumlah Kutub
Tegangan Gawé Dipeunteun [Ue]
Sirkuit kakuatan: <= 300 V DC
Dipeunteun Gawé Ayeuna [Ie]
12 A (lamun suhu operasi <= 60 °C) lamun tegangan operasi <= 440 V AC, AC - 3 pikeun sirkuit kakuatan.
12 A (lamun suhu operasi <= 60 °C) lamun tegangan operasi <= 440 V AC, AC - 3e pikeun sirkuit kakuatan.
Tegangan Sirkuit Kontrol [Uc]
Émbaran tambahan
Daya Motor (kW)
3 kW nalika tegangan operasi <= 220/240 V AC, 50/60 Hz (AC – 3)
5,5 kW nalika tegangan operasi <= 380/400 V AC, 50/60 Hz (AC – 3)
5,5 kW nalika tegangan operasi <= 415/440 V AC, 50/60 Hz (AC – 3)
7,5 kW nalika tegangan operasi <= 660/690 V AC, 50/60 Hz (AC – 3)
7,5 kW nalika tegangan operasi <= 500 V AC, 50/60 Hz (AC – 3e)
3 kW lamun tegangan operasi <= 220/240 V AC, 50/60 Hz (AC – 3e)
5,5 kW nalika tegangan operasi <= 380/400 V AC, 50/60 Hz (AC – 3e)
5,5 kW nalika tegangan operasi <= 415/440 V AC, 50/60 Hz (AC – 3e)
7,5 kW nalika tegangan operasi <= 660/690 V AC, 50/60 Hz (AC – 3e)
Modél
Jenis Kontak Circuit
Panutup Pelindung
Arus Pemanasan Konvensional [Ith]
10 A (lamun suhu operasi <= 60 °C) pikeun sirkuit sinyal.
Dipeunteun pondok - waktos tahan ayeuna [ICW]
210 A nalika suhu operasi <= 40 °C, sustainable pikeun 1 s pikeun sirkuit kakuatan.
30 A nalika suhu operasi <= 40 °C, sustainable pikeun 10 menit pikeun sirkuit kakuatan.
61 A nalika suhu operasi <= 40 °C, sustainable pikeun 1 menit pikeun sirkuit kakuatan.
100 A, sustainable pikeun 1 s pikeun sirkuit sinyal.
120 A, sustainable pikeun 500 mdet pikeun sirkuit sinyal.
140 A, sustainable pikeun 100 mdet pikeun sirkuit sinyal.
Fuses dipaké ditéang jeung Relays
40 A gG nalika tegangan operasi <= 690 V, ditéang jeung Tipe 1, pikeun sirkuit kakuatan.
25 A gG nalika tegangan operasi <= 690 V, ditéang jeung Tipe 2, pikeun sirkuit kakuatan.
Impedansi rata
Tegangan Insulasi Dipeunteun [Ui]
Sirkuit sinyal: 690 V, luyu jeung IEC 60947 - 1.
Overvoltage Kategori
Gelar polusi
Dipeunteun Impuls Tahan Tegangan [Uimp]
Kasalametan jeung Reliabiliti Level
B10d = 20000000 kali pikeun contactors kalawan beban mékanis, luyu jeung EN / ISO 13849 - 1.
Kahirupan mékanis
Kahirupan Listrik
0,8 Mcycles dina 25 A, AC - 1, kaayaan Ue <= 440 V.
2.2 Mcycles dina 9 A, AC - 3, kaayaan Ue 660/690 V.
2 Mcycles dina 12 A, AC – 3e, kaayaan Ue <= 440 V.
2.2 Mcycles dina 9 A, AC – 3e, kaayaan Ue 660/690 V.
Ciri Sirkuit Kontrol
Surge suprési Module
Wates tegangan kontrol
0,8…1,1 Uc (- 40…60 °C): Coil mimiti, 50 Hz.
0,85…1,1 Uc (- 40…60 °C): Coil mimiti, 60 Hz.
Konsumsi Daya (VA) (~50Hz Mimitian)
70 VA dina 50 Hz, cos phi 0,75 (dina 20 °C)
Konsumsi Daya (VA) (~50Hz Nyepeng)
6 VA dina 50 Hz, cos phi 0.3 (dina 20 °C)
Dissipation Panas
Waktos Aksi
4…19 ms pikeun bubuka
Frékuénsi Operasi maksimum
Kapasitas Wiring
Sirkuit kakuatan: Bolted fastening 2, 1…4 mm², terminal lug diaméterna luar Ø: 8 mm, tipe kabel: kawat fléksibel tanpa terminal.
Sirkuit kakuatan: Bolted fastening 1, 1…4 mm², terminal lug diaméterna luar Ø: 8 mm, tipe kabel: kawat fléksibel jeung terminal.
Sirkuit kakuatan: Bolted fastening 2, 1…2,5 mm², terminal lug diaméterna luar Ø: 8 mm, tipe kabel: kawat fléksibel jeung terminal.
Sirkuit kakuatan: Bolted fastening 1, 1…4 mm², terminal lug diaméterna luar Ø: 8 mm, tipe kabel: kawat kaku tanpa terminal.
Sirkuit listrik: Bolted fastening 2, 1…4 mm², terminal lug diaméterna luar Ø: 8 mm, tipe kabel: kawat kaku tanpa terminal.
Sirkuit kontrol: Bolted fastening 1, 1…4 mm², tipe kabel: kawat fléksibel tanpa terminal.
Sirkuit kontrol: Bolted fastening 2, 1…4 mm², tipe kabel: kawat fléksibel tanpa terminal.
Sirkuit kontrol: Bolted fastening 1, 1…4 mm², tipe kabel: kawat fléksibel jeung terminal.
Sirkuit kontrol: Bolted fastening 2, 1…2,5 mm², tipe kabel: kawat fléksibel jeung terminal.
Sirkuit kontrol: Bolted fastening 1, 1…4 mm², tipe kabel: kawat kaku tanpa terminal.
Sirkuit kontrol: Bolted fastening 2, 1…4 mm², tipe kabel: kawat kaku tanpa terminal.
Torsi tightening
Sirkuit kakuatan: 1,7 Nm ngaliwatan bolted fastening kalawan cross-head obeng No 2.
Sirkuit kontrol: 1,7 Nm ngaliwatan bolted fastening ku obeng datar - bladed Ø 6.
Sirkuit kontrol: 1,7 Nm ngaliwatan bolted fastening kalawan cross-head obeng No 2.
sirkuit kakuatan: 1,7 Nm ngaliwatan konektor kabel ku datar - bladed obeng Ø 6, screw: M3.5.
sirkuit kakuatan: 1,7 Nm ngaliwatan konektor kabel ku cross - sirah obeng No 2, screw: M3.5.
Sirkuit kontrol: 1,7 Nm ngaliwatan fastening bolted ku obeng pozidriv No 2.
Sirkuit kakuatan: 1,7 Nm ngaliwatan bolted fastening ku obeng pozidriv No 2.
Jenis Kontak Bantu
Ketik Eunteung - digambar sareng Nagara Kontak Utama 1 NC, saluyu sareng IEC 60947 - 4 - 1.
Sadia Kontak Bantu per Contactor
Sinyal Circuit Frékuénsi
Arus Saklar Minimum [Imin]
Résistansi insulasi
10 MΩ pikeun sirkuit sinyal.
Non - Tumpang tindih Time
1,5 mdet antara NC jeung NO kontak lamun energized.
Métode Pamasangan
Pamasangan panel
Lingkungan
Conformance Standar
IEC 60947 - 4 - 1
GB / T 14048.4
Sertifikasi produk
UKCA
CCC
Peunteun Protection IP
IP2X pikeun panel hareup, lumaku pikeun sirkuit coil, luyu jeung IEC 60529.
Ukuran panyalindungan
Suhu hawa ambient
- 40…60 °C pikeun operasi.
60…70 °C kalayan derating. - 60…80 °C pikeun neundeun.
Luhur Gawé
Seuneu jeung Abnormal High - Résistansi suhu
Shock jeung Résistansi Geter
Résistansi geter nalika kontak ditutup (4 gn (5…300 Hz)), luyu jeung IEC 60068 – 2 – 6.
Résistansi guncangan 11 mdet nalika kontak dibuka (10 gn), saluyu sareng IEC 60068 – 2 – 27.
Résistansi guncangan 11 mdet nalika kontak ditutup (15 gn), saluyu sareng IEC 60068 – 2 – 27.
Jangkungna
Lebar
Jerona
Beurat bersih
Unit bungkusan
Jumlah Unit dina Paket 1: 1
Paket 1 Jangkungna: 5,152 cm
Paket 1 Rubak: 7,874 cm
Paket 1 Panjangna: 9,441 cm
Paket 1 Beurat: 341,0 g
Tipe Unit Paket 2: S02
Jumlah Unit dina Paket 2: 24
Paket 2 Jangkungna: 15,0 cm
Paket 2 Rubak: 30,0 cm
Paket 2 Panjangna: 40,0 cm
Paket 2 Beurat: 8,771 kg
Unit Tipe Paket 3: PAL
Jumlah Unit dina Paket 3: 384
Paket 3 Jangkungna: 60,0 cm
Paket 3 Rubak: 80,0 cm
Paket 3 Panjangna: 75,0 cm
Paket 3 Beurat: 130,994 kg
Garansi Kontrak
18 bulan
Kelas Bahan
| Bahan | Standar ASTM A240 | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410L 410 |
| Standar ASTM A480 | 302, s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 310H, 310H, 310H, 310H, 310H 321H,347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S30254, S3102 S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S33204 S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
| JIS 4304-2005 Standar | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
| JIS G4305 Standar | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS3010S, SUS SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J1, SUS317J1, SUS317J1, SUSL836J2 SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS4364 SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Spésifikasi produk
| Bérés | Kandelna | Ciri | Aplikasi |
| No. 1 | 3.0mm ~ 50.0mm | Réngsé ku panas-rolling, annealing na pickling, dicirikeun ku permukaan pickled bodas | Parabot industri kimia, tank industri |
| No. 2B | 0.3mm ~ 6.0mm | Réngsé ku perlakuan panas, pickling sanggeus rolling tiis, dituturkeun ku garis pass kulit janten permukaan leuwih caang jeung lemes | Aplikasi Umum Alat Médis, Tableware |
| No. BA (Bright Annealed) | 0.5mm ~ 2.0mm | perlakuan panas caang sanggeus rolling tiis | Parabot dapur, parabot dapur, tujuan arsitéktur |
| No. 4 | 0.4mm ~ 3.0mm | Polishing kalawan No.. 150 mun No.180 bolong abrasives. The finish pang populerna | fasilitas ngolah susu & dahareun, alat-alat rumah sakit, bak mandi |
| No. 8 | 0.5mm ~ 2.0mm | Permukaan reflektif sapertos eunteung ku ngagosok nganggo abrasive anu langkung saé langkung ti 800 bolong | Reflektor, Eunteung, Interior-Exterior hiasan pikeun wangunan |
| HL (Garis Rambut) | 0.4mm ~ 3.0mm | Réngsé ku polishing linier kontinyu | Tujuan arsitéktur, escalators, kandaraan ware dapur |
Komposisi kimiawi
| Kelas | C | Si | Mn | P | S | Cr | Ni | Mo | Ti | N | Cu | Nb |
| 201 | ≤0.15 | ≤1.0 | 5.50-7.50 | ≤0.05 | ≤0.03 | 16.00-18.00 | 3.50-5.50 | - | - | 0.05-0.25 | - | - |
| 202 | ≤0.15 | ≤1.0 | 7.50-10.00 | ≤0.05 | ≤0.03 | 17.00-19.00 | 4.00-6.00 | - | - | 0.05-0.25 | - | - |
| 301 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0,045 | ≤0.03 | 16.00-18.00 | 6.00-8.00 | - | - | ≤0.1 | - | - |
| 302 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | ≤0.1 | - | - |
| 303 | ≤0.15 | ≤1.0 | ≤2.0 | ≤0.2 | ≥0.15 | 17.00-19.00 | 8.00-10.00 | ≤0.6 | - | ≤0.1 | - | - |
| 304 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 8.00-10.00 | - | - | - | - | - |
| 304L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304H | 0.04-0.1 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | - | - | - |
| 304N | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 8.00-10.00 | - | - | 0.10-0.16 | - | - |
| 304J1 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 6.00-9.00 | - | - | - | 1.00-3.00 | - |
| 305 | ≤0.12 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 10.50-13.00 | - | - | - | - | - |
| 309S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 22.00-24.00 | 12.00-15.00 | - | - | - | - | - |
| 310S | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 24.00-26.00 | 19.00-22.00 | - | - | - | - | - |
| 316 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | 12.00-15.00 | 2.00-3.00 | - | - | - | - |
| 316H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | - | - | - |
| 316N | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | 10.00-14.00 | 2.00-3.00 | - | 0.10-0.16 | - | - |
| 316Ti | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 16.00-19.00 | 11.00-14.00 | 2.00-3.00 | ≥5C | - | - | - |
| 317L | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 18.00-20.00 | 11.00-15.00 | 3.00-4.00 | - | - | - | - |
| 321 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | 5C-0.7 | - | - | - |
| 347 | ≤0.08 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 10C-1.10 |
| 347H | ≤0.1 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | 9.00-12.00 | - | - | - | - | 8C-1.10 |
| 2205 | ≤0.03 | ≤1.0 | ≤2.0 | ≤0,035 | ≤0.03 | 21.00-24.00 | 4.50-6.50 | 2.50-3.50 | - | 0.08-0.20 | - | - |
| 2507 | ≤0.03 | ≤0.8 | ≤1.2 | ≤0,035 | ≤0.02 | 24.00-26.00 | 6.00-8.00 | 3.00-5.00 | - | 0.24-0.32 | - | - |
| 904L | ≤0.02 | ≤1.0 | ≤2.0 | ≤0,045 | ≤0.03 | 19.00-23.00 | 23.00-28.00 | 4.00-5.00 | - | - | 1.00-2.00 | - |
| C276 | ≤0.02 | ≤0.05 | ≤1.0 | - | - | 14.00-16.50 | Lain | - | - | - | - | - |
| Monel400 | ≤0.3 | ≤0.5 | ≤2.0 | - | ≤0,024 | - | ≥63 | - | - | - | 28-34 | - |
| 409L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 17.00-19.00 | - | - | - | - | - | - |
| 410 | ≤0.15 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 410L | ≤0.03 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 11.50-13.50 | - | - | - | - | - | - |
| 420J1 | 0.16-0.25 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 420J2 | 0.26-0.40 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 12.00-14.00 | - | - | - | - | - | - |
| 430 | ≤0.12 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 436L | ≤0,025 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-19.00 | - | - | - | - | - | - |
| 439 | ≤0.03 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | - | - | - | - | - |
| 440A | 0.60-0.75 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440B | 0.75-0.95 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 440C | 0.95-1.2 | ≤1.0 | ≤1.0 | ≤0,035 | ≤0.03 | 16.00-18.00 | - | ≤0.75 | - | - | - | - |
| 441 | ≤0.03 | 0.2-0.8 | ≤0.7 | ≤0.03 | ≤0,015 | 17.50-18.50 | - | ≤0.5 | 0.1-0.5 | ≤0,025 | - | 0.3+3C-0.9 |
UrangBungkus produk stainless steel sareng kertas anti karat sareng cincin baja pikeun nyegah karusakan.
Labél idéntifikasi ditandaan nurutkeun spésifikasi standar atanapi paréntah palanggan.
packing husus geus sadia sakumaha per sarat customer urang.
Pakét Coil Stainless Steel
Lambaran Stainless Steel / Paket Lempeng Stainless Steel
Pakét Jalur Stainless Steel
Paket Pangiriman
Perusahaan kami dumasar di Wuxi, ngumpul kota stainless steel industri di Cina.
Kami khusus dina gulungan stainless, sepré sareng piring, pipa baja stainless sareng fitting, tabung stainless steel, sareng ogé produk aluminium sareng produk tambaga.
produk urang geus kacida muji ku klien kami ti Éropa, Amerika, Wétan Tengah, Afrika jeung Asia Tenggara. Urang bakal nawiskeun produk kalapa sarta layanan komprehensif ka konsumén.
Stainless Steel Kelas: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 47, 41, 321, 47 430, 430F, 440, 440c,
Kelas Paduan: Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Hampang Steel, Aluminium, Alloy Steel, Karbon Steel, Special Nikel Alloys
Dina bentuk: Bar Bulat, Bar Square, Bar Heksagonal, Bar Datar, Sudut, Saluran, Profil, Kawat, Batang Kawat, Lembar, Piring, Pipa Seamless, Pipa ERW, Flanges, Fittings, jsb.
Q1: Naon stainless?
A: Stainless hartina euweuh tanda dina beungeut baja, atawa jenis baja nu teu ruksak ku hawa atawa cai jeung nu teu robah warna ka warna, spotless, tahan ka staining, rusting, pangaruh corrosive bahan kimia.
Q2: Dupi stainless hartosna euweuh rusting?
A: No, stainless hartina teu gampang meunang patri atawa Rusty, éta mibanda kamampuhan speical mun reisist staining, rusting sarta korosi.
Q3: Dupi anjeun nyadiakeun cadar stainless steel?
A: Sumuhun, urang nyadiakeun tipena béda cadar stainless steel, kalayan ketebalan Bulan ti 0.3-3.0mm. sarta dina finish béda.
Q4: Naha anjeun nampi cut kana jasa panjang?
A: Tangtosna, kapuasan customer mangrupikeun prioritas utama urang.
Q5: Upami abdi gaduh pesenan alit, naha anjeun nampi pesenan alit?
A: Henteu masalah, perhatian anjeun perhatian urang, jumlah leutik nu katampa.
Q6: Kumaha anjeun tiasa ngajamin kualitas produk anjeun?
A: Kahiji, ti mimiti pisan, urang geus geus dilaksanakeun sumanget kana pikiran maranéhanana, nyaéta kualitas hirup, pagawe profésional urang jeung staffs bakal nuturkeun nepi unggal hambalan dugi barang dipak ogé sarta shipped kaluar.
Q7: Dupi anjeun pak produk?
A: jalma profésional ngalakukeun packing profésional, urang boga tipena béda packing pilihan pikeun konsumén, ékonomi hiji atawa hadé.
Q8: Naon nu peryogi kauninga ti customer saméméh cutatan akurat?
A: Pikeun hiji cutatan akurat, urang kudu nyaho kelas, ketebalan, ukuran, permukaan finish, warna jeung kuantitas pesenan anjeun, sarta ogé tujuan barang. Inpo produk ngaropéa bakal diperlukeun deui, kawas gambar, perenah jeung rencana. Teras kami bakal nawiskeun petik kalapa sareng inpormasi di luhur.
Q9: Jenis istilah pembayaran anjeun accpet?
A: Kami nampi T / T, West union, L / C.
Q10: Upami ieu pesenan leutik, anjeun bakal ngirim barang ka agén kami?
A: Sumuhun, urang dilahirkeun pikeun ngajawab masalah konsumén urang, urang bakal meunang barang aman ka gudang agén anjeun sarta ngirim anjeun gambar.
Q11: Naha anjeun ngan ukur ngadamel lambaran datar? Abdi hoyong ngadamel fabrikasi pikeun proyék énggal abdi.
A: No, urang utamana ngahasilkeun perlakuan permukaan lambar datar stainless steel, dina waktos anu sareng, urang rancang logam ngaropéa produk rengse sakumaha per gambar customer sarta rencana, teknisi urang bakal ngurus sésana.
Q12: Sabaraha coutries anjeun geus diékspor?
A: diékspor ka leuwih ti 50 nagara utamana ti Amérika, Rusia, Inggris, Kuwait, Mesir, Iran,
Turki, Yordania, jsb.
Q13: Kumaha carana abdi tiasa sababaraha sampel?
A: Sampel leutik di toko sareng tiasa nyayogikeun conto gratis. Catalgue sadia, paling
pola kami geus siap sampel di stock. sampel ngaropéa bakal nyandak ngeunaan 5-7days.
Q14: Naon pangiriman?
A: waktos pangiriman sampel urutan urang téh 5-7 poé. Pesenan wadahna sakitar 15-20 dinten.
Q15: Naon aplikasi ngeunaan Produk anjeun?
A: 1.elevator panto / kabin atawa na escalator urang sisi-témbok.
2. Wall cladding di jero atawa di luar kamar pasamoan / réstoran.
3.Fasad nalika cladding leuwih hal, kawas kolom di lobi.
4. Plafon di supermarket. 5.Dekoratif draws di sababaraha tempat hiburan.
Q16: Sabaraha lami Anjeun tiasa ngajamin pikeun Produk ieu / rengse?
A: jaminan Warna pikeun leuwih ti 10 taun. Sertipikat kualitas bahan asli tiasa
disadiakeun.
