430 2B سٹینلیس سٹیل کنڈلی
مختصر کوائف:
سٹینلیس سٹیل کنڈلی
سٹینلیس سٹیل کنڈلی گرم رولنگ اور سرد رولنگ، 0.31-3.0 ملی میٹر شیٹ اور 3.0-30 ملی میٹر پلیٹ کی موٹائی سمیت طرف سے بنایا جا سکتا ہے.
گرم، شہوت انگیز-رولڈ سٹینلیس سٹیل کے طور پر سرد رولڈ یانترک خصوصیات میں کے طور پر اچھا نہیں ہے، لیکن اچھی جفاکشی اور تنیتا موجود ہیں. سرد-رولڈ سٹینلیس سٹیل پلیٹ اچھا سخت باعث جفاکشی میں کم ہے.
ضروریات کو پورا کرنے کے لئے سٹینلیس سٹیل کی پیداوار طاقت، tensile طاقت، بڑھاو اور سختی اور دیگر یانترک خصوصیات کے تمام قسم کے یقینی بنانے کے لئے، ترسیل سے پہلے سٹینلیس سٹیل annealing کے، حل کا علاج، گرمی کے علاج عمر بڑھنے ہونا ضروری ہے.
مواد گریڈ
مواد | ASTM A240 سٹینڈرڈ | 201، 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
ASTM A480 سٹینڈرڈ | 302، s30215، s30452، s30615، 308، 309، 309Cb، 310، 310Cb، S32615، S33228، S38100، 304H، 309H، 310H، 316H، 309HCb، 310HCb، 321H، 347H، 348H، S31060، N08811، N08020، N08367، N08810، N08904، N08926، S31277، S20161، S30600، S30601، S31254، S31266، S32050، S32654، S32053، S31727، S33228، S34565، S35315، S31200، S31803، S32001، S32550، S31260، S32003، S32101، S32205، S32304، S32506، S32520، S32750، S32760، S32900، S32906، S32950، S32974 | |
JIS 4304-2005 سٹینڈرڈ | SUS301L، SUS301J1، SUS302، SUS304، SUS304L، SUS316 / 316L، SUS309S، SUS310S، 3SUS21L، SUS347، SUS410L، SUS430، SUS630 | |
JIS G4305 سٹینڈرڈ | SUS301، SUS301L، SUS301J1، SUS302B، SUS304، SUS304Cu، SUS304L، SUS304N1، SUS304N2، SUS304LN، SUS304J1، SUSJ2، SUS305، SUS309S، SUS310S، SUS312L، SUS315J1، SUS315J2، SUS316، SUS316L، SUS316N، SUS316LN، SUS316Ti، SUS316J1، SUS316J1L، SUS317، SUS317L، SUS317LN، SUS317J1، SUS317J2، SUS836L، SUS890L، SUS321، SUS347، SUSXM7، SUSXM15J1، SUS329J1، SUS329J3L، SUS329J4L، SUS405، SUS410L، SUS429، SUS430، SUS430LX، SUS430J1L، SUS434، SUS436L، SUS436J1L، SUS444، SUS445J1، SUS445J2، SUS447J1، SUSXM27، SUS403، SUS410، SUS410S، SUS420J1، SUS420J2، SUS440A |
مصنوعات کی تفصیلات
ختم | موٹائی | خصوصیات | درخواستیں |
نمبر 1 | 3.0MM ~ 50.0mm | گرم، شہوت انگیز رولنگ، annealing اور pickling کے، سفید نمکین سطح کی طرف سے خصوصیات کی طرف سے ختم | کیمیائی صنعت کے سامان، صنعتی ٹینکوں |
نمبر 2B | 0.3MM ~ 6.0mm | زیادہ روشن اور ہموار سطح بننے کی ہیٹ ٹریٹمنٹ، سرد رولنگ کے بعد pickling کے، جلد پاس لائن کی طرف سے پیروی کی طرف سے ختم | ضابطہء کار طبی آلات، کٹلری |
نمبر BA (روشن لئے annealed) | 0.5mm کے ~ 2.0mm کے | سرد رولنگ کے بعد روشن ہیٹ ٹریٹمنٹ | باورچی خانے کے برتن، باورچی خانے کے برتن، تعمیراتی مقصد |
نمبر 4 | 0.4mm ~ 3.0MM | No.180 میش رگڑنے کرنے نمبر 150 کے ساتھ چمکانے. سب سے زیادہ مقبول فارغ | دودھ اور شہد کی پروسیسنگ کی سہولیات، ہسپتال کے آلات، غسل ٹب |
نمبر 8 | 0.5mm کے ~ 2.0mm کے | 800 میش اس پر بہتر رگڑنے کے ساتھ پالش کی طرف سے ایک آئینے کی طرح عکاس سطح | مائکشیپک، آئینہ، داخلہ-بیرونی سجاوٹ forbuilding |
HL (بال لائن) | 0.4mm ~ 3.0MM | مسلسل لکیری چمکانے کی طرف سے ختم | تعمیراتی مقاصد، ایسکیلیٹز، باورچی خانے کے برتن کی گاڑیاں |
سٹینڈرڈ سائز
سائز | موٹائی: 0.15mm-3.00mm (کولڈ رولڈ کی چادریں)؛ 4-30mm (ہاٹ رولڈ پلیٹ) |
چوڑائی: 1000mm، 1219mm، 1250mm، 1500mm کی، 1800mm، کی 2000mm | |
لمبائی: کنڈلی طور |
کیمیائی ساخت
گریڈ |
C |
سی |
MN |
P |
S |
بنائیں ایک ب ح |
نی |
یمو |
ٹی |
ن |
کاپر |
نایب |
201 |
≤0.15 |
≤1.0 |
5.50-7.50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3.50-5.50 |
- |
- |
0.05-0.25 |
- |
- |
202 |
≤0.15 |
≤1.0 |
7.50-10.00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4.00-6.00 |
- |
- |
0.05-0.25 |
- |
- |
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6.00-8.00 |
- |
- |
≤0.1 |
- |
- |
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304H |
0.04-0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0.10-0.16 |
- |
- |
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6.00-9.00 |
- |
- |
- |
1.00-3.00 |
- |
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10.50-13.00 |
- |
- |
- |
- |
- |
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22.00-24.00 |
12.00-15.00 |
- |
- |
- |
- |
- |
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24.00-26.00 |
19.00-22.00 |
- |
- |
- |
- |
- |
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0.10-0.16 |
- |
- |
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11.00-15.00 |
3.00-4.00 |
- |
- |
- |
- |
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0.7 |
- |
- |
- |
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4.50-6.50 |
2.50-3.50 |
- |
0.08-0.20 |
- |
- |
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24.00-26.00 |
6.00-8.00 |
3.00-5.00 |
- |
0.24-0.32 |
- |
- |
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19.00-23.00 |
23.00-28.00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14.00-16.50 |
دیگر |
- |
- |
- |
- |
- |
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
420J1 |
0.16-0.25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
420J2 |
0.26-0.40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
440A |
0.60-0.75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440B |
0.75-0.95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440C |
0.95-1.2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
441 |
≤0.03 |
0.2-0.8 |
≤0.7 |
≤0.03 |
≤0.015 |
17.50-18.50 |
- |
≤0.5 |
0.1-0.5 |
≤0.025 |
- |
0.3 + 3C-0.9 |
مواد گریڈ
مواد | ASTM A240 سٹینڈرڈ | 201، 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
ASTM A480 سٹینڈرڈ | 302، s30215، s30452، s30615، 308، 309، 309Cb، 310، 310Cb، S32615، S33228، S38100، 304H، 309H، 310H، 316H، 309HCb، 310HCb، 321H، 347H، 348H، S31060، N08811، N08020، N08367، N08810، N08904، N08926، S31277، S20161، S30600، S30601، S31254، S31266، S32050، S32654، S32053، S31727، S33228، S34565، S35315، S31200، S31803، S32001، S32550، S31260، S32003، S32101، S32205، S32304، S32506، S32520، S32750، S32760، S32900، S32906، S32950، S32974 | |
JIS 4304-2005 سٹینڈرڈ | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
JIS G4305 سٹینڈرڈ | SUS301، SUS301L، SUS301J1، SUS302B، SUS304، SUS304Cu، SUS304L، SUS304N1، SUS304N2، SUS304LN، SUS304J1، SUSJ2، SUS305، SUS309S، SUS310S، SUS312L، SUS315J1، SUS315J2، SUS316، SUS316L، SUS316N، SUS316LN، SUS316Ti، SUS316J1، SUS316J1L، SUS317، SUS317L، SUS317LN، SUS317J1، SUS317J2، SUS836L، SUS890L، SUS321، SUS347، SUSXM7، SUSXM15J1، SUS329J1، SUS329J3L، SUS329J4L، SUS405، SUS410L، SUS429، SUS430، SUS430LX، SUS430J1L، SUS434، SUS436L، SUS436J1L، SUS444، SUS445J1، SUS445J2، SUS447J1، SUSXM27، SUS403، SUS410، SUS410S، SUS420J1، SUS420J2، SUS440A |
مصنوعات کی تفصیلات
ختم | موٹائی | خصوصیات | درخواستیں |
نمبر 1 | 3.0MM ~ 50.0mm | گرم، شہوت انگیز رولنگ، annealing اور pickling کے، سفید نمکین سطح کی طرف سے خصوصیات کی طرف سے ختم | کیمیائی صنعت کے سامان، صنعتی ٹینکوں |
نمبر 2B | 0.3MM ~ 6.0mm | زیادہ روشن اور ہموار سطح بننے کی ہیٹ ٹریٹمنٹ، سرد رولنگ کے بعد pickling کے، جلد پاس لائن کی طرف سے پیروی کی طرف سے ختم | ضابطہء کار طبی آلات، کٹلری |
نمبر BA (روشن لئے annealed) | 0.5mm کے ~ 2.0mm کے | سرد رولنگ کے بعد روشن ہیٹ ٹریٹمنٹ | باورچی خانے کے برتن، باورچی خانے کے برتن، تعمیراتی مقصد |
نمبر 4 | 0.4mm ~ 3.0MM | No.180 میش رگڑنے کرنے نمبر 150 کے ساتھ چمکانے. سب سے زیادہ مقبول فارغ | دودھ اور شہد کی پروسیسنگ کی سہولیات، ہسپتال کے آلات، غسل ٹب |
نمبر 8 | 0.5mm کے ~ 2.0mm کے | 800 میش اس پر بہتر رگڑنے کے ساتھ پالش کی طرف سے ایک آئینے کی طرح عکاس سطح | مائکشیپک، آئینہ، داخلہ-بیرونی سجاوٹ forbuilding |
HL (بال لائن) | 0.4mm ~ 3.0MM | مسلسل لکیری چمکانے کی طرف سے ختم | تعمیراتی مقاصد، ایسکیلیٹز، باورچی خانے کے برتن کی گاڑیاں |
کیمیائی ساخت
گریڈ |
C |
سی |
MN |
P |
S |
بنائیں ایک ب ح |
نی |
یمو |
ٹی |
ن |
کاپر |
نایب |
201 |
≤0.15 |
≤1.0 |
5.50-7.50 |
≤0.05 |
≤0.03 |
16.00-18.00 |
3.50-5.50 |
- |
- |
0.05-0.25 |
- |
- |
202 |
≤0.15 |
≤1.0 |
7.50-10.00 |
≤0.05 |
≤0.03 |
17.00-19.00 |
4.00-6.00 |
- |
- |
0.05-0.25 |
- |
- |
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16.00-18.00 |
6.00-8.00 |
- |
- |
≤0.1 |
- |
- |
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
≤0.1 |
- |
- |
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17.00-19.00 |
8.00-10.00 |
≤0.6 |
- |
≤0.1 |
- |
- |
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304H |
0.04-0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
- |
- |
- |
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
8.00-10.00 |
- |
- |
0.10-0.16 |
- |
- |
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
6.00-9.00 |
- |
- |
- |
1.00-3.00 |
- |
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
10.50-13.00 |
- |
- |
- |
- |
- |
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22.00-24.00 |
12.00-15.00 |
- |
- |
- |
- |
- |
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24.00-26.00 |
19.00-22.00 |
- |
- |
- |
- |
- |
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
12.00-15.00 |
2.00-3.00 |
- |
- |
- |
- |
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
- |
- |
- |
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
10.00-14.00 |
2.00-3.00 |
- |
0.10-0.16 |
- |
- |
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
11.00-14.00 |
2.00-3.00 |
≥5C |
- |
- |
- |
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18.00-20.00 |
11.00-15.00 |
3.00-4.00 |
- |
- |
- |
- |
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
5C-0.7 |
- |
- |
- |
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
10C-1.10 |
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
9.00-12.00 |
- |
- |
- |
- |
8C-1.10 |
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21.00-24.00 |
4.50-6.50 |
2.50-3.50 |
- |
0.08-0.20 |
- |
- |
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24.00-26.00 |
6.00-8.00 |
3.00-5.00 |
- |
0.24-0.32 |
- |
- |
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19.00-23.00 |
23.00-28.00 |
4.00-5.00 |
- |
- |
1.00-2.00 |
- |
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14.00-16.50 |
دیگر |
- |
- |
- |
- |
- |
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17.00-19.00 |
- |
- |
- |
- |
- |
- |
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11.50-13.50 |
- |
- |
- |
- |
- |
- |
420J1 |
0.16-0.25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
420J2 |
0.26-0.40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12.00-14.00 |
- |
- |
- |
- |
- |
- |
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-19.00 |
- |
- |
- |
- |
- |
- |
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
- |
- |
- |
- |
- |
440A |
0.60-0.75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440B |
0.75-0.95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
440C |
0.95-1.2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16.00-18.00 |
- |
≤0.75 |
- |
- |
- |
- |
441 |
≤0.03 |
0.2-0.8 |
≤0.7 |
≤0.03 |
≤0.015 |
17.50-18.50 |
- |
≤0.5 |
0.1-0.5 |
≤0.025 |
- |
0.3 + 3C-0.9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
ہم سٹینلیس کنڈلی، چادریں اور پلیٹ، سٹینلیس سٹیل کے پائپ اور متعلقہ اشیاء، سٹینلیس سٹیل ٹیوبیں، اور بھی ایلومینیم کی مصنوعات اور تانبے کی مصنوعات میں مہارت.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.