321 stainess staal spoel
Kort beskrywing:
Type 321 is a stabilized stainless steel (addition of Titanium) offering excellent resistance to intergranular corrosion attack following exposure to high temperatures. It’s often used in aerospace, high temperature and tool wrap applications.
321 Stainless Steel coil
321 Stainless steel coil can be made by hot rolling and cold rolling, including the thickness of 0.31-3.0 mm sheet and 3.0-30 mm plate.
Hot-gerol vlekvrye staal is nie so goed soos koue-gerol in meganiese eienskappe, maar daar is 'n goeie taaiheid en smeebaarheid. Koue-gerol vlekvrye staal plaat laag in taaiheid te danke aan die goeie verharding.
Ten einde te verseker dat alle vorme van vlekvrye staal opbrengs krag, treksterkte, verlenging en hardheid en ander meganiese eienskappe om die vereistes te voldoen, moet voor aflewering vlekvrye staal uitgloeiing, oplossing behandeling, veroudering hitte behandeling.
321 stainess staal spoel Material Grade
materiaal | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
ASTM A480 Standard | 302 s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
JIS 4304-2005 Standard | SUS301L, SUS301J1, SUS302, SUS304, SUS304L, SUS316 / 316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
321 stainess steel coil Product Specification
afwerking | dikte | eienskappe | aansoeke |
No 1 | 3.0mm ~ 50.0mm | Klaar deur warm-rollende, uitgloeiing en beit, wat gekenmerk word deur wit gepekelde oppervlak | Chemiese bedryf toerusting, Industrial tenks |
No. 2B | 0.3mm ~ 6.0mm | Klaar deur hitte behandeling, beit na koue rollende, gevolg deur vel pas lyn te meer helderder en 'n gladde oppervlak | Algemene Aansoek mediese instrumente, Eetgerei |
No. BA (Bright uitgegloei) | 0.5mm ~ 2.0mm | Bright hitte behandeling na koue rollende | Kombuis gereedskap, kombuisware, argitektoniese doel |
No 4 | 0.4mm ~ 3.0mm | Poleer met No. 150 tot No.180 mesh skuur. Die gewildste afwerkings | Melk & Voedselverwerking fasiliteite, Hospitaal Toerusting, Bath-bad |
No. 8 | 0.5mm ~ 2.0mm | A spieël-agtige reflektiewe oppervlak deur poleer met fyner skuur meer as 800 maas | Weerkaatser, Mirror, Binne-buite versiering forbuilding |
HL (Hair Line) | 0.4mm ~ 3.0mm | Klaar deur deurlopende lineêre polering | Argitektoniese doeleindes, roltrappe, kombuisware voertuie |
321 stainess steel coil Standard sizes
grootte | Dikte: 0.15mm-3.00mm (Koue Gerolde velle); 4-30mm (Hot gerol plaat) |
Breedte: 1000mm, 1219mm, 1250, 1500mm, 1800mm, 2000mm | |
Lengte: as rolle |
321 stainess steel Coil Chemical composition
graad |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
NB |
201 |
≤0.15 |
≤1.0 |
5,50-7,50 |
≤0.05 |
≤0.03 |
16,00-18,00 |
3,50-5,50 |
- |
- |
0,05-0,25 |
- |
- |
202 |
≤0.15 |
≤1.0 |
7,50-10,00 |
≤0.05 |
≤0.03 |
17,00-19,00 |
4,00-6,00 |
- |
- |
0,05-0,25 |
- |
- |
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16,00-18,00 |
6,00-8,00 |
- |
- |
≤0.1 |
- |
- |
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
8,00-10,00 |
- |
- |
≤0.1 |
- |
- |
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17,00-19,00 |
8,00-10,00 |
≤0.6 |
- |
≤0.1 |
- |
- |
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
8,00-10,00 |
- |
- |
- |
- |
- |
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
8,00-10,00 |
- |
- |
- |
- |
- |
304H |
0,04-0,1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
8,00-10,00 |
- |
- |
- |
- |
- |
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
8,00-10,00 |
- |
- |
0,10-0,16 |
- |
- |
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
6,00-9,00 |
- |
- |
- |
1,00-3,00 |
- |
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
10,50-13,00 |
- |
- |
- |
- |
- |
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22,00-24,00 |
12,00-15,00 |
- |
- |
- |
- |
- |
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24,00-26,00 |
19,00-22,00 |
- |
- |
- |
- |
- |
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
10,00-14,00 |
2,00-3,00 |
- |
- |
- |
- |
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
12,00-15,00 |
2,00-3,00 |
- |
- |
- |
- |
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
10,00-14,00 |
2,00-3,00 |
- |
- |
- |
- |
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
10,00-14,00 |
2,00-3,00 |
- |
0,10-0,16 |
- |
- |
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-19,00 |
11,00-14,00 |
2,00-3,00 |
≥5C |
- |
- |
- |
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
11,00-15,00 |
3,00-4,00 |
- |
- |
- |
- |
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
9,00-12,00 |
- |
5C-0,7 |
- |
- |
- |
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
9,00-12,00 |
- |
- |
- |
- |
10C-1.10 |
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
9,00-12,00 |
- |
- |
- |
- |
8C-1.10 |
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21,00-24,00 |
4,50-6,50 |
2,50-3,50 |
- |
0,08-0,20 |
- |
- |
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24,00-26,00 |
6,00-8,00 |
3,00-5,00 |
- |
0,24-0,32 |
- |
- |
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19,00-23,00 |
23,00-28,00 |
4,00-5,00 |
- |
- |
1,00-2,00 |
- |
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14,00-16,50 |
ander |
- |
- |
- |
- |
- |
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
- |
- |
- |
- |
- |
- |
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50-13,50 |
- |
- |
- |
- |
- |
- |
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50-13,50 |
- |
- |
- |
- |
- |
- |
420J1 |
0,16-0,25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12,00-14,00 |
- |
- |
- |
- |
- |
- |
420J2 |
0,26-0,40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12,00-14,00 |
- |
- |
- |
- |
- |
- |
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
- |
- |
- |
- |
- |
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-19,00 |
- |
- |
- |
- |
- |
- |
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
- |
- |
- |
- |
- |
440A |
0,60-0,75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
≤0.75 |
- |
- |
- |
- |
440B |
0,75-0,95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
≤0.75 |
- |
- |
- |
- |
440C |
0,95-1,2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
≤0.75 |
- |
- |
- |
- |
441 |
≤0.03 |
0,2-0,8 |
≤0.7 |
≤0.03 |
≤0.015 |
17,50-18,50 |
- |
≤0.5 |
0,1-0,5 |
≤0.025 |
- |
0.3 + 3C-0.9 |
We do have 321vstainless steel sheet, 321 stainless steel plate, 321 stainless steel tube,321 stainless steel strip.
321 stainess staal spoelX 321 vlekvrye staal plaatX 321 vlekvrye staal plaatX 321 vlekvrye staal buisX Gelaste vlekvrye staal buis 321X 321 vlekvrye staal strook
materiaal Graad
materiaal | ASTM A240 Standard | 201, 304 304L 304H 309S 309H 310S 310H 316 316H 316L 316Ti 317 317L 321 321H 347 347H 409 410 410S 430 904L |
ASTM A480 Standard | 302 s30215, s30452, s30615, 308, 309, 309Cb, 310, 310Cb, S32615, S33228, S38100, 304H, 309H, 310H, 316H, 309HCb, 310HCb, 321H, 347H, 348H, S31060, N08811, N08020, N08367, N08810, N08904, N08926, S31277, S20161, S30600, S30601, S31254, S31266, S32050, S32654, S32053, S31727, S33228, S34565, S35315, S31200, S31803, S32001, S32550, S31260, S32003, S32101, S32205, S32304, S32506, S32520, S32750, S32760, S32900, S32906, S32950, S32974 | |
JIS 4304-2005 Standard | SUS301L,SUS301J1,SUS302,SUS304, SUS304L, SUS316/316L, SUS309S, SUS310S, 3SUS21L, SUS347, SUS410L, SUS430, SUS630 | |
JIS G4305 Standard | SUS301, SUS301L, SUS301J1, SUS302B, SUS304, SUS304Cu, SUS304L, SUS304N1, SUS304N2, SUS304LN, SUS304J1, SUSJ2, SUS305, SUS309S, SUS310S, SUS312L, SUS315J1, SUS315J2, SUS316, SUS316L, SUS316N, SUS316LN, SUS316Ti, SUS316J1, SUS316J1L, SUS317, SUS317L, SUS317LN, SUS317J1, SUS317J2, SUS836L, SUS890L, SUS321, SUS347, SUSXM7, SUSXM15J1, SUS329J1, SUS329J3L, SUS329J4L, SUS405, SUS410L, SUS429, SUS430, SUS430LX, SUS430J1L, SUS434, SUS436L, SUS436J1L, SUS444, SUS445J1, SUS445J2, SUS447J1, SUSXM27, SUS403, SUS410, SUS410S, SUS420J1, SUS420J2, SUS440A |
Produk spesifikasie
afwerking | dikte | eienskappe | aansoeke |
No 1 | 3.0mm ~ 50.0mm | Klaar deur warm-rollende, uitgloeiing en beit, wat gekenmerk word deur wit gepekelde oppervlak | Chemiese bedryf toerusting, Industrial tenks |
No. 2B | 0.3mm ~ 6.0mm | Klaar deur hitte behandeling, beit na koue rollende, gevolg deur vel pas lyn te meer helderder en 'n gladde oppervlak | Algemene Aansoek mediese instrumente, Eetgerei |
No. BA (Bright uitgegloei) | 0.5mm ~ 2.0mm | Bright hitte behandeling na koue rollende | Kombuis gereedskap, kombuisware, argitektoniese doel |
No 4 | 0.4mm ~ 3.0mm | Poleer met No. 150 tot No.180 mesh skuur. Die gewildste afwerkings | Melk & Voedselverwerking fasiliteite, Hospitaal Toerusting, Bath-bad |
No. 8 | 0.5mm ~ 2.0mm | A spieël-agtige reflektiewe oppervlak deur poleer met fyner skuur meer as 800 maas | Weerkaatser, Mirror, Binne-buite versiering forbuilding |
HL (Hair Line) | 0.4mm ~ 3.0mm | Klaar deur deurlopende lineêre polering | Argitektoniese doeleindes, roltrappe, kombuisware voertuie |
Chemiese samestelling
graad |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Ti |
N |
Cu |
NB |
201 |
≤0.15 |
≤1.0 |
5,50-7,50 |
≤0.05 |
≤0.03 |
16,00-18,00 |
3,50-5,50 |
- |
- |
0,05-0,25 |
- |
- |
202 |
≤0.15 |
≤1.0 |
7,50-10,00 |
≤0.05 |
≤0.03 |
17,00-19,00 |
4,00-6,00 |
- |
- |
0,05-0,25 |
- |
- |
301 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
16,00-18,00 |
6,00-8,00 |
- |
- |
≤0.1 |
- |
- |
302 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
8,00-10,00 |
- |
- |
≤0.1 |
- |
- |
303 |
≤0.15 |
≤1.0 |
≤2.0 |
≤0.2 |
≥0.15 |
17,00-19,00 |
8,00-10,00 |
≤0.6 |
- |
≤0.1 |
- |
- |
304 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
8,00-10,00 |
- |
- |
- |
- |
- |
304L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
8,00-10,00 |
- |
- |
- |
- |
- |
304H |
0,04-0,1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
8,00-10,00 |
- |
- |
- |
- |
- |
304N |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
8,00-10,00 |
- |
- |
0,10-0,16 |
- |
- |
304J1 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
6,00-9,00 |
- |
- |
- |
1,00-3,00 |
- |
305 |
≤0.12 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
10,50-13,00 |
- |
- |
- |
- |
- |
309S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
22,00-24,00 |
12,00-15,00 |
- |
- |
- |
- |
- |
310S |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
24,00-26,00 |
19,00-22,00 |
- |
- |
- |
- |
- |
316 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
10,00-14,00 |
2,00-3,00 |
- |
- |
- |
- |
316L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
12,00-15,00 |
2,00-3,00 |
- |
- |
- |
- |
316H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
10,00-14,00 |
2,00-3,00 |
- |
- |
- |
- |
316N |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
10,00-14,00 |
2,00-3,00 |
- |
0,10-0,16 |
- |
- |
316Ti |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
16,00-19,00 |
11,00-14,00 |
2,00-3,00 |
≥5C |
- |
- |
- |
317L |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
18,00-20,00 |
11,00-15,00 |
3,00-4,00 |
- |
- |
- |
- |
321 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
9,00-12,00 |
- |
5C-0,7 |
- |
- |
- |
347 |
≤0.08 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
9,00-12,00 |
- |
- |
- |
- |
10C-1.10 |
347H |
≤0.1 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
9,00-12,00 |
- |
- |
- |
- |
8C-1.10 |
2205 |
≤0.03 |
≤1.0 |
≤2.0 |
≤0.035 |
≤0.03 |
21,00-24,00 |
4,50-6,50 |
2,50-3,50 |
- |
0,08-0,20 |
- |
- |
2507 |
≤0.03 |
≤0.8 |
≤1.2 |
≤0.035 |
≤0.02 |
24,00-26,00 |
6,00-8,00 |
3,00-5,00 |
- |
0,24-0,32 |
- |
- |
904L |
≤0.02 |
≤1.0 |
≤2.0 |
≤0.045 |
≤0.03 |
19,00-23,00 |
23,00-28,00 |
4,00-5,00 |
- |
- |
1,00-2,00 |
- |
C276 |
≤0.02 |
≤0.05 |
≤1.0 |
- |
- |
14,00-16,50 |
ander |
- |
- |
- |
- |
- |
Monel400 |
≤0.3 |
≤0.5 |
≤2.0 |
- |
≤0.024 |
- |
≥63 |
- |
- |
- |
28-34 |
- |
409L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
17,00-19,00 |
- |
- |
- |
- |
- |
- |
410 |
≤0.15 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50-13,50 |
- |
- |
- |
- |
- |
- |
410L |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
11,50-13,50 |
- |
- |
- |
- |
- |
- |
420J1 |
0,16-0,25 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12,00-14,00 |
- |
- |
- |
- |
- |
- |
420J2 |
0,26-0,40 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
12,00-14,00 |
- |
- |
- |
- |
- |
- |
430 |
≤0.12 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
- |
- |
- |
- |
- |
436L |
≤0.025 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-19,00 |
- |
- |
- |
- |
- |
- |
439 |
≤0.03 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
- |
- |
- |
- |
- |
440A |
0,60-0,75 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
≤0.75 |
- |
- |
- |
- |
440B |
0,75-0,95 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
≤0.75 |
- |
- |
- |
- |
440C |
0,95-1,2 |
≤1.0 |
≤1.0 |
≤0.035 |
≤0.03 |
16,00-18,00 |
- |
≤0.75 |
- |
- |
- |
- |
441 |
≤0.03 |
0,2-0,8 |
≤0.7 |
≤0.03 |
≤0.015 |
17,50-18,50 |
- |
≤0.5 |
0,1-0,5 |
≤0.025 |
- |
0.3 + 3C-0.9 |
We wrap the stainless steel products with anti-rust paper and steel rings to prevent damage.
Identification labels are tagged accordingto standard specification or customer’s instructions.
Special packing is available as per customer’s requirement.
Stainless Steel Coil Package
Stainless Steel Sheet / Stainless Steel Plate Package
Stainless Steel Strip Package
Shipment Package
Our company is based in Wuxi, gathering city of industrial stainless steel in China.
Ons gespesialiseerde in vlekvrye spoele, velle en plaat, vlekvrye staal pyp en toebehore, vlekvrye staal buise, en ook aluminium produkte en koper produkte.
Our products have been highly praised by our clients from Europe, America, the Middle East, African and Southeast Asia. We will offer competitive products and comprehensive service to customers.
Stainless Steel Grade: 201, 202, 202cu, 204, 204cu, 303, 304, 304L, 308, 308L, 309, 309s, 310, 310s, 316, 316L, 321, 347, 410, 416, 420, 430, 430F, 440, 440c,
Alloy Grade :Monel, Inconel, Hastolley, Duplex, Super Duplex, Titanium, Tantalum, High Speed Steel, Mild Steel, Aluminium, Alloy Steel, Carbon Steel, Special Nickel Alloys
In form of : Round Bars, Square Bars, Hexagonal Bars, Flat Bars, Angles, Channels, Profiles, Wires, Wire Rods, Sheets, Plates, Seamless Pipes, ERW Pipes, Flanges, Fittings,etc.
Q1: What is stainless?
A: Stainless means no marks on the steel surface, or a kind of steel that is not damaged by air or water and that does not change color, spotless, resistant to staining, rusting, the corrosive effect of chemicals.
Q2: Does stainless mean no rusting?
A: No, stainless means not easy to get stained or rusty, it has speical ability to reisist staining, rusting and corrosion.
Q3: Do you supply stainless steel sheets?
A: Yes, we supply different types of stainless steel sheets, with thickness ranges from 0.3-3.0mm. and in different finishes.
Q4: Do you accept cut to length service?
A: Of course, customer’s satisfaction is our top priority.
Q5: If i have a small order, do you accept small order?
A: Not a problem, your concern is our concern, small quantities are accepted.
Q6: How can you guarantee your product quality?
A: First, from the very start, we have already implemented a spirit to their mind, that is quality is life, our professional workers and staffs will follow up every step till the goods packed well and shipped out.
Q7: Will you pack the products?
A: Professional people do professional packing, we have different types of packing optional to customers, economic one or better one.
Q8: What do you need to know from customer before accurate quotation?
A: For an accurate quotation, we need to know grade, thickness, size, surface finish, color and quantity of your order, and also the destination of the goods. Customized product information will be needed more, like drawing, layout and plan. Then we will offer competitive quotation with the above information.
Q9: What kind of payment term you accpet?
A: We accept T/T, West union, L/C.
Q10: If this is a small order, will you delivery the goods to our agent?
A: Yes, we are born to solve problems of our customers, we will get the goods safely to your agent’s warehouse and send you the pictures.
Q11: Do you just make flat sheet? I want to make a fabrication for my new project.
A: No, we mainly produce stainless steel flat sheet surface treatment, at the same time, we manufacture customized metal finished product as per customer’s drawing and plan, our technician will take care of the rest.
Q12: How many coutries you already exported ?
A: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran,
Turkey, Jordan, etc.
Q13: How can I get some samples?
A: Small samples in store and can provide the samples for free. Catalgue is available, most
patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q14: What is the delivery ?
A: Sample order’s delivery time is 5- 7 days. Container orders are about 15-20 days.
Q15: What is the application about your Products?
A: 1.elevator door/cabin or and escalator’s side-wall.
2.Wall cladding inside or outside meeting room/ restaurant.
3.Facade when cladding over something, like columns in the lobby.
4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q16: How long Can You Guarantee for This Product/Finish?
A: Color guarantee for more than 10 years. Original materials quality certificate can
be provided.